مقالات علمی چاپ شده در مجلات

1. "Fabrication and experimental investigation of arc erosion behavior in W/Cu functionally graded composites"
   Ramezan Ali Mahdavi Nezhad, Mohammad Khaje Afzali
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 3, No 235, 2020
2. "Arc-Erosion Behavior of W/Zr/Cu Electrical Contact Materials Prepared by Functionally Graded Composite Technique"
   Ramezan Ali Mahdavi Nezhad, Mohammad Khaje afzali
   METALS AND MATERIALS INTERNATIONAL, Vol. 3, No 2, pp.67-79, 2020
3. "superior advance research in the electro-discharge machining of Ti alloys"
   Ramezan Ali Mahdavi Nezhad, Mohsen Asghari
   International Journal of Scientific Research in Mechanical and Materials Engineering, Vol. 3, No 3, pp.19-39, 2019
4. "Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters"
   Hamid Reza fazli shahri, Ali Akbar Akbari, Ramezan Ali Mahdavi Nezhad, Ali Solati
   Journal of Computational Applied Mechanics, Vol. 49, No 1, 2018
5. "A novel method towards approximation of the temperature distribution in electric discharge machining of Ti-6Al-4V by up-scaling approach"
   Hamid Reza Fazli Shahri, Ramezan Ali Mahdavi Nezhad
   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 96, No 4, pp.503-520, 2018
6. "Surface hardness improvement in surface grinding process using combined Taguchi metthod and regression analysis"
   Hamid Reza fazli shahri, Ali Akbar Akbari, Ramezan Ali Mahdavi Nezhad, Ali Solati
   Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol. 12, No 2, 2018
7. "Prediction of temperature and HAZ in thermal-based processes with Gaussian heat source by a hybrid GA-ANN model"
   Ramezan Ali Mahdavi Nezhad, Hamid Reza Fazli Shahri
   OPTICS AND LASER TECHNOLOGY, Vol. 14, No 99, pp.363-373, 2017
8. "A comparative investigation on temperature distribution in electric discharge machining process through analytical, numerical and experimental methods"
   Hamid Reza Fazli Shahri, Ramezan Ali Mahdavi Nezhad, Mehdi Ashjaee, Amir Abdullah
   International Journal of Machine Tools and Manufacture, Vol. 10, No 114, pp.35-53, 2017
9. "Comparative Study on Electrical Discharge Machining of Ultrafine-Grain Al, Cu, and Steel"
   Mohammad Sajjad Mahdie, Ramezan Ali Mahdavi Nezhad
   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 47, No 12, pp.6237-6247, 2016
10. "A study of stored energy in ultra-fined grained aluminum machined by electrical discharge machining"
    Mohammad Sajjad Mahdieh, Ramezan Ali Mahdavi Nezhad
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 45, No 6, pp.1-6, 2016
11. "Recast layer and micro-cracks in electrical discharge machining of ultra-fine-grained aluminum"
    Mohammad Sajjad Mahdieh, Ramezan Ali Mahdavi Nezhad
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 42, No 6, pp.1-6, 2016
12. "Investigation of the ultrasonic vibration effect in incremental sheet metal forming process"
    Mehdi Vahdati, Ramezan Ali Mahdavi Nezhad, Saeid Amini
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 10, No 1177, pp.1-12, 2015
13. "Statistical Analysis and Optimization of Factors Affecting the Surface Roughness in the UVaSPIF Process Using Response Surface Methodology"
    Mehdi Vahdati, Ramezan Ali Mahdavi Nezhad, Saeid Amini, Mojtaba Moradi
    Journal of Advanced Materials and Processing, Vol. 3, No 1, pp.15-28, 2015
14. "Dissimilar friction stir lap welding of Al-Mg to CuZn34:Application of grey relational analysis for optimizing process parameters"
    Saman Khalilpourazary, Reza Abdi Behnagh, Ramezan Ali Mahdavi Nezhad, Nasib Payam
    Journal of Computational and Applied Research in Mechanical Engineering, Vol. 4, No 1, pp.81-88, 2014
15. "Production of Wire From AA7277 Aluminum Chips via Friction-Stir Extrusion(FSE)"
    Reza Abdi Behnagh, Ramezan Ali Mahdavi Nezhad, Masoud Abdollahi, Morteza Narvand
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, Vol. B, No 45, pp.1484-1489, 2014
16. "Simulating the buckling deflection of carbon nanotube-made detectors used in medical detections by applying a continuum mechanics model"
    Alireza Vahdati, Ramezan Ali Mahdavi Nezhad, Mehdi Vahdati
    Life Science Journal, Vol. 10, No 1, pp.186-191, 2013
17. "Investigation of green properties of iron/jet-milled gray cast iron compacts by response surface method"
    Hadi Abdollahi, Ramezan Ali Mahdavi Nezhad, Mahmoud Moradi
    Proceedings of the Institution of Mechanical Engineers. Part B. Management and engineering manufacture, Vol. 228, No 4, pp.493-503, 2013
18. "A Novel Approach to the Determination of Forming Limit Diagrams for Tailor-Welded Blanks"
    Hossein Mamusi, Abolfazl Masoumi, Ramezan Ali Mahdavi Nezhad
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. -, 2013
19. "EDM and EDM/USM Output Parameters of Titanium"
    Ramezan Ali Mahdavi Nezhad
    Achievements in Materials and Manufacturing Engineering, Vol. 56, No 2, pp.89-93, 2012
20. "The Effect Tool Geometry on Resonance Phenomenom in Turning Process"
    Ramezan Ali Mahdavi Nezhad, M Khajeafzali
    Journal of Manufacturing Science and Production, Vol. 12, No 2, pp.87-93, 2012
21. "Optimization of milling parameters using artificial neural network and artificial immune system"
    Ramezan Ali Mahdavi Nezhad, Navi Khani , Mir Masoud Seyyed Fakhrabadi
    Journal of Mechanical Science and Technology, Vol. 26, No 12, pp.4097-4104, 2012
22. "MULTI - FUNCTION MILLING TOOL - HOLDER DESIGN AND MANUFACTURING"
    Ramezan Ali Mahdavi Nezhad
    Advanced Materials Research, Vol. 136, pp.172-178, 2012
23. "Fluid Flow Analysis in Pressing Process"
    Ramezan Ali Mahdavi Nezhad
    International Journal of Computational Materials Science and Surface Engineering, Vol. 9, No 5, pp.121-126, 2012
24. "Error Investigation in a Milling Machine"
    Ramezan Ali Mahdavi Nezhad
    International Journal of Computational Materials Science and Surface Engineering, Vol. 9, pp.143-149, 2012
25. "THE EFFECT OF MACHINING PARAMETERS ON SURFACE QUALITY USING ROTARY SINGLE - TIP TOOL"
    Ramezan Ali Mahdavi Nezhad
    Advanced Materials Research, Vol. 136, No 1, pp.233-239, 2012
26. "PREDICTION OF ANGULAR ERRORS ON A VERTICAL CNC MILLING MACHINE"
    Ramezan Ali Mahdavi Nezhad
    IRANIAN JOURNAL OF SCIENCE, Vol. 35, pp.181-195, 2012
27. "Investigation of the Influential parameters of machining of AISI 304 stainless steel"
    Seyyed Mehdi Saeedy , Ramezan Ali Mahdavi Nezhad
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, Vol. 36, No 6, pp.963-970, 2012
28. "Simulation and experimental investigation of FSP of AZ91 magnesium alloy"
    P Asadi , Ramezan Ali Mahdavi Nezhad, S Tutunchilar
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 528, No 21, pp.6469-6477, 2011
29. "Neural Network Modeling of Milling Parameters"
    Ramezan Ali Mahdavi Nezhad
    Achievements in Materials and Manufacturing Engineering, Vol. 44, No 3, pp.57-61, 2011
30. "Modeling and Optimization of Electrical Discharge Machining of SiC Parameters Using Neural Network and Non - Dominating Sorting Genetic Algorithm ( NSGA"
    Ramezan Ali Mahdavi Nezhad
    Materials Sciences and Applications, Vol. 2, No 6, pp.669-675, 2011
31. "Multiple Job Shop - Scheduling using Hybrid Heuristic Algorithm"
    Ramezan Ali Mahdavi Nezhad
    World Academy of Science Engineering and Technology, Vol. 5, No 3, pp.207-274, 2011
32. "Job Shop Scheduling Problems - Single Process"
    Ramezan Ali Mahdavi Nezhad
    Applied Mechanics and Materials, Vol. 44-47, No 3, pp.330-334, 2011
33. "Effect of Lubricant in Output Parameters of Milling"
    Ramezan Ali Mahdavi Nezhad
    Applied Mechanics and Materials, Vol. 44,47, No 3, pp.335-339, 2010
34. "Vibration Effects on Tailstock of Turning Machine"
    Hassan Sharifi Bidgoli , Ramezan Ali Mahdavi Nezhad
    Advanced Materials Research, Vol. 118, No 3, pp.876-880, 2010
35. "Optimization of Turning Parameters Using Multi - Objective Genetic Algorithm"
    Ramezan Ali Mahdavi Nezhad
    Advanced Materials Research, Vol. 118, No 3, pp.359-363, 2010
36. "ED Machining Investigation of REFEL Silicon Carbide"
    Ramezan Ali Mahdavi Nezhad
    Advanced Materials Research, Vol. 118, No 2, pp.489-494, 2010
37. "A new approach to job shop - scheduling proble"
    Ramezan Ali Mahdavi Nezhad
    Achievements in Materials and Manufacturing Engineering, Vol. 41, No 2, 2010
38. "Optimization of surface roughness parameters in dry turning"
    Ramezan Ali Mahdavi Nezhad, Sharifi Bidgoli
    Achievements in Materials and Manufacturing Engineering, Vol. 37, No 2, pp.571-577, 2009
39. "Introduction of serial architecture for small CNC facilities"
    Ramezan Ali Mahdavi Nezhad
    Achievements in Materials and Manufacturing Engineering, Vol. 36, No 1, pp.57-64, 2009
40. "EDM process optimization via predicting a controller model"
    Ramezan Ali Mahdavi Nezhad
    International Journal of Computational Materials Science and Surface Engineering, Vol. 1, No 3, pp.161-167, 2009
41. "Jig Grinding an Effective Method in Ball Lock Punches Production"
    Ramezan Ali Mahdavi Nezhad
    Advanced Materials Research, Vol. 46, No 44, pp.489-495, 2008
42. "Prediction of Cannon barrel life"
    Ramezan Ali Mahdavi Nezhad
    Achievements in Materials and Manufacturing Engineering, Vol. 30, No 1, 2008
43. "ECM RIFLING TOOL DESIGN AND MANUFACTURING"
    Ramezan Ali Mahdavi Nezhad, M R Hatami
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY, TRANSCATION B: ENGINEERING, Vol. 32, pp.341-352, 2008
44. "On the application of electrochemical machining for inner surface polishing of gun barrel chamber"
    Ramezan Ali Mahdavi Nezhad, Mohammad Reza Hatami
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 202, pp.307-315, 2008
45. "Optimiation of electro discharge machining parameters"
    Ramezan Ali Mahdavi Nezhad
    Achievements in Materials and Manufacturing Engineering, Vol. 27, No 2, pp.163-166, 2008
46. "Barrel Chamber Polishing, Using Electrochemical Theories"
    Ramezan Ali Mahdavi Nezhad
    Key Engineering Materials, Vol. 364/366, No 1, pp.272-279, 2008
47. "Minimization of heat loss in CNC motors via a dynamic control method"
    Ramezan Ali Mahdavi Nezhad
    Achievements in Materials and Manufacturing Engineering, Vol. 14, pp.163-170, 2006
48. "The behaviour of REFEL SiC under electrodischarge machining"
    Ramezan Ali Mahdavi Nezhad, Masoud Mehraban , Davod Mahdavinejad
    Proceedings of the Institution of Mechanical Engineers. Part B. Management and engineering manufacture, Vol. 220, No 10, pp.1635-1646, 2006
49. "ED machining of WC - Co"
    Ramezan Ali Mahdavi Nezhad
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 162,163, pp.637-643, 2005
50. "Finite Element ِ Dimensional Design and Modeling of an Ultrasonic Transducer"
    Ramezan Ali Mahdavi Nezhad
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY, TRANSCATION B: ENGINEERING, Vol. 29, pp.253-263, 2005
51. "Heat Tranasfer Analysis of EDM Process on Silicon Carbide"
    Ramezan Ali Mahdavi Nezhad, Majid Toloueirad , Hassan Sharifibidgoli
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, Vol. 15, No 5, pp.483-502, 2005
52. "Finite Element Analysis of Machine and Workpiece Instability in Turning"
    Ramezan Ali Mahdavi Nezhad
    International Journal of Machine Tools and Manufacture, Vol. 45, pp.753-760, 2005
53. "طراحی و ساخت ابزار شکل دهی مرتعش به منظور توسعه فریند شکل دهی تدریجی ورق فلزی به کمک ارتعاش اولتراسونیک"
    مهدی وحدتی، رمضانعلی مهدوی نژاد، محمد دکامین، رحیم عبادی، کارن ابری نیا
    مهندسی مکانیک مدرس، نسخه 14، شماره 11، صفحات:68-76، 1393
54. "بهینه سازی خواص مکانیکی قطعات متالورژی پودر بازیابی شده پایه آهنی و بررسی این خواص با آزمون عرضی"
    هادی عبدالهی، رمضانعلی مهدوی نژاد، وحید زال، محمد قمبری
    مهندسی مکانیک مدرس، نسخه 14، شماره 1، صفحات:149-157، 1393
55. "بررسی نیروهای ماشینکاری و شار حرارتی در فصل مشترک ابزار-قطعه کار در فرایند تراشکاری به روش اجزا محدود"
    رمضانعلی مهدوی نژاد، محمد خواجه افضلی، محمد رضا رازفر
    فصلنامه مکانیک هوافضا، نسخه 9، شماره 3، صفحات:77-85، 1392
56. "تحلیل فرسایش ابزار در ماشینکاری فولاد ST - 37"
    رمضانعلی مهدوی نژاد، محمد خواجه افضلی ، عنایت الله دزیانی
    نشریه تخصصی مکانیک کاربردی، نسخه 45، شماره 1، صفحات:77-85، 1390
57. "پیش بینی زبری سطح در تراشکاری خشک به کمک شبکه های فازی - عصبی تطبیقی"
    رمضانعلی مهدوی نژاد،  کامران تمیمی
    دانشکده فنی دانشگاه تهران، نسخه 43، شماره 1، صفحات:103-110، 1388
58. "آنالیز تنشهای مکانیکی و حرارتی در اسپیندل ماشنهای تراش"
    رمضانعلی مهدوی نژاد، محمد غلامی نژاد ثانی ابادی
    دانشکده فنی دانشگاه تهران، نسخه 41، شماره 4، صفحات:525-533، 1386
59. "شبیه سازی کامپیوتری فرایند شکل دهی شیارهای داخل لوله به روش الکتروشیمیایی"
    حمیدرضا حسنی ، رمضانعلی مهدوی نژاد
    دانشکده فنی دانشگاه تهران، نسخه 38، شماره 4، صفحات:525-535، 1383

مقالات علمی ارائه شده در همایش‌ها

1. "Experimental investigation of the effect of variables of speed and current intensity of the wirecut machine on the surface properties of CK45 steel"
   Sayyed Hossein Hosseininasab, Ramezan Ali Mahdavi Nezhad, سیدحسین حسینی نسب سیدحسین حسینی نسب
   The 20th National Conference and 9th International Conference of Manufacturing Engineering ICME2024, 2024
2. "Numerical Simulation of Milling Parameters Based on Smoothed Particle Hydrodynamics (SPH): Part п-Experiments"
   Ramezan Ali Mahdavi Nezhad
   ICEMPM 2018: 20th International Conference on Engineering, Manufacturing and Production Management, 2018
3. "Numerical Simulation of Milling Parameters Based on Smoothed Particle Hydrodynamics (SPH): Part ɪ-Modeling"
   Ramezan Ali Mahdavi Nezhad
   ICEMPM 2018: 20th International Conference on Engineering, Manufacturing and Production Management, 2018
4. "Prediction of applied forces in incremental sheet metal forming (ISMF) process"
   Ramezan Ali Mahdavi Nezhad
   ICEMPM 2018: 20th International Conference on Engineering, Manufacturing and Production Management, 2018
5. "Optimization of milling parameters: Part п- using artificial immune system"
   Ramezan Ali Mahdavi Nezhad
   5th Annual International Conference on Materials Science, Metal & Manufacturing (M3 2018), 2018
6. "Optimization of milling parameters: Part ɪ- using artificial neural network"
   Ramezan Ali Mahdavi Nezhad
   5th Annual International Conference on Materials Science, Metal & Manufacturing (M3 2018), 2018
7. "Machining Forces Investigation in AISI 1045 Steel Turning"
   Ramezan Ali Mahdavi Nezhad
   5th Annual International Conference on Materials Science, Metal & Manufacturing (M3 2018), 2018
8. "Uncut Fiber Factors in Composite Structure"
   Ramezan Ali Mahdavi Nezhad
   ICMO 2017: 19th International Conference on Manufacturing and Optimization, 2017
9. "Investigation of Green Properties of Iron/Jet milled Grey Cast Iron by Response Surface Method"
   Ramezan Ali Mahdavi Nezhad
   ICMO 2017: 19th International Conference on Manufacturing and Optimization, 2017
10. "An Effective Method to Investigate of Green Properties of Iron/Jet Milled Grey Cast Iron Compacts"
    Ramezan Ali Mahdavi Nezhad
    ICMO 2017: 19th International Conference on Manufacturing and Optimization, 2017
11. "Dissimilar Friction Stir Lap Welding of Al-Mg to CuZn34: Application of Grey Relational Analysis for Optimization of Process"
    Ramezan Ali Mahdavi Nezhad
    ICMO: 19th International Conference on Manufacturing Information and Industrial Engineering, 2017
12. "Tool Geometric and Cutting Parameters Affection on Temperature and Machining Forces in Turning"
    Ramezan Ali Mahdavi Nezhad
    ICMO: 19th International Conference on Manufacturing Information and Industrial Engineering, 2017
13. "Wire Production From AA7277 Aluminum Chips"
    Ramezan Ali Mahdavi Nezhad
    ICMO: 19th International Conference on Manufacturing Information and Industrial Engineering, 2017
14. "Optimization of Milling Parameters Using artificial neural network"
    Ramezan Ali Mahdavi Nezhad
    18thnternational Conference on Manufacturing and Optimization(ICMO2016), 2016
15. "Material Removal Rate in EDMachining of Inconel 738 Alloy"
    Ramezan Ali Mahdavi Nezhad
    18thnternational Conference on Manufacturing and Optimization(ICMO2016), 2016
16. "Tool Wear Ratio in EDMachining of Inconel 738 Alloy"
    Ramezan Ali Mahdavi Nezhad
    18thnternational Conference on Manufacturing and Optimization(ICMO2016), 2016
17. "Detemination of Forming Limit Diagrams for Tailor-Welded Blanks"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Industrial and Mechanical Engineering(ICIME 2016), 2016
18. "Al-Mg to CuZn34 Dissimilar Friction Stir Lap Welding"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Industrial and Mechanical Engineering(ICIME 2016), 2016
19. "AA7277 Aluminum Wire Production Using Friction-Stir Extrusion (FSE)"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Industrial and Mechanical Engineering(ICIME 2016), 2016
20. "Finite Element Modeling of Cutting Zone Temperature Distribution in Turning Process"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Industrial and Manufacturing Engineering, 2015
21. "Investigation of Tool Vibration in Turning"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Industrial and Manufacturing Engineering, 2015
22. "Modeling of Cutting Zone Temperature Distribution in Turning Process via ALE Method"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Industrial and Manufacturing Engineering, 2015
23. "Optimization of Abrasive Jet Machining Nozzzle"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Applications and Design in Mechanical Engineerin (ICADME 2015), 2015
24. "AJM Parameters with Diverged Nozzle"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Applications and Design in Mechanical Engineerin (ICADME 2015), 2015
25. "Investigation of AISI 304 Stainless Steel Turning Parameters"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Applications and Design in Mechanical Engineerin (ICADME 2015), 2015
26. "The Effect of Tool Geometry on Temperature and Machining Forces in Turning"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Industrial Engineering and Technology (WASET), 2014
27. "Optimization Machining Parameters of AISI 304 Stainless Steel"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Industrial Engineering and Technology (WASET), 2014
28. "The Effect of Main Parameters in AISi 304 Stailness Steel Turning"
    Ramezan Ali Mahdavi Nezhad
    International Conference on Industrial Engineering and Technology (WASET), 2014
29. "Thermal Strain Analysis of Steel Turning"
    Ramezan Ali Mahdavi Nezhad
    3rd International Conference on Chemical Engineering, 2013
30. "Stress Analysis in Steel Turning"
    Ramezan Ali Mahdavi Nezhad
    3rd International Conference on Chemical Engineering and Advanced Materials, 2013
31. "Force Analysis in Steel Turning"
    Ramezan Ali Mahdavi Nezhad
    3rd International Conference on Chemical Engineering and Advanced Materials, 2013
32. "Lubricant Usage in Milling Process"
    Ramezan Ali Mahdavi Nezhad
    The 2nd International Conference on BiotechnologyChemical and Materials Engineering, 2012
33. "Electro Discharge Machining Parameters of Titanium"
    Ramezan Ali Mahdavi Nezhad
    The 2nd International Conference on BiotechnologyChemical and Materials Engineering, 2012
34. "Error Analysis in a CNC Milling Machine"
    Ramezan Ali Mahdavi Nezhad
    Achievements in Mechanical and Materials Engineering, 2012
35. "Solving Multiple Job-Shop Scheduling Problems"
    Ramezan Ali Mahdavi Nezhad
    Achievements in Mechanical and Materials Engineering, 2012
36. "The effect of Fluid in Pressing Process"
    Ramezan Ali Mahdavi Nezhad
    Achievements in Mechanical and Materials Engineering, 2012
37. "Numerical Simulation for the Formability Prediction of the Laser Welded Blanks (TWB"
    Hossein Mamusi , Abolfazl Masoumi, Ramezan Ali Mahdavi Nezhad
    ICAMAME 2012 : International Conference on Aerospace Mechanical Automotive and Materials Engineering, 2012
38. "Electro Discharge/Ultrasonic Machining of Titanium Alloy"
    Ramezan Ali Mahdavi Nezhad
    The 3rd International Conference on Production Energy and Reliablity, 2012
39. "Manufacturing of Milling Tool-Holder"
    Ramezan Ali Mahdavi Nezhad
    The 3rd International Conference on Production Energy and Reliablity, 2012
40. "The Effect of Machining Parameters on Surface Quality Using Rotary Single-Tip Tool"
    Ramezan Ali Mahdavi Nezhad
    The 3rd International Conference on Production Energy and Reliablity, 2012
41. "EDM MACHINING INVESTIGATION OF REFEL SILICON CARBIDE"
    Ramezan Ali Mahdavi Nezhad
    2011 International Conference on BiotechnologyChemical and Materials Engineering, 2011
42. "ELECTRODISCHARGE/ULTRASONIC MACHINING OF TITANIUM ALLOY"
    Ramezan Ali Mahdavi Nezhad
    International Conference on BiotechnologyChemical and Materials Engineering, 2011
43. "Fuzzy Logica Powerful Tool to Predict EDM Process Parameters"
    Ramezan Ali Mahdavi Nezhad
    2011 IFSAAFSS International Conference, 2011
44. "A Branch Genetic Algorithm Applied to Job-Shop Scheduling Problem"
    Ramezan Ali Mahdavi Nezhad
    2011 IFSAAFSS International Conference, 2011
45. "بررسی تجربی زبری سطح فولاد ضد زنگ 304 در ماشینکاری خشک"
    علیرضا سولقانی علیرضا سولقانی، رمضانعلی مهدوی نژاد
    هشتمین نمایش ملی و نهمین کنفرانس بین المللی مهندسی ساخت و تولید، 1402
46. "بررسی خواص نمونه تیتانیوم ساخته شده با استفاده از براد ه بازیافتی ماش ینکاری و س ینت رینگ پلاسم ای جرقها ی"
    رمضانعلی مهدوی نژاد، سیدحسین حسینی نسب سیدحسین حسینی نسب، سیدمحمدرضا سده ئی
    بیستمین همایش ملی و نهمین کنفرانس بینالمللی مهندسی ساخت و تولید، 1402
47. "اندازه گیری درجه حرارت و بررسی تنش پسماند فولاد ضد زنگ 304 در ماشینکاری خشک"
    رمضانعلی مهدوی نژاد، علیرضا سولقانی علیرضا سولقانی
    هشتمین نمایش ملی و نهمین کنفرانس بین المللی مهندسی ساخت و تولید، 1402
48. "تحلیل تئوری و عددی ارتعاش فیکسچر شکل دهی در فرآیند"
    مهدی وحدتی، رمضانعلی مهدوی نژاد، ارسلان گلفام ، محمد امینی
    همایش ملی مهندسی مکانیک، 1392