Journal Paper

1. "An Analytical Approach for the Near‐Tip Field Around V‐Notch in Orthotropic Materials"
   Adel Esmaeili, Amin Kuhzadmohammadi, Majid Safarabadifarahani
   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. -, pp.1-15, 2024
2. "Investigating experimental and numerical effects of nano additives on distortion of cured unsymmetrical composite laminates"
   Mojtaba Rahmani Gheshlaghi, Mohsen Mobarakian, Majid Safarabadifarahani
   Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 46, 2024
3. "A simplified approach for predicting last ply failure load of VO-notched laminated composite components"
   محمد صادق امیری نیا, Mojtaba Haghighi Yazdi, Majid Safarabadifarahani
   JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, Vol. -, pp.1-25, 2024
4. "A deep learning model to extract the interphase’s characteristics in microstructures using macroscopic responses"
   Mohammadreza Mohammadnejad, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi
   Extreme Mechanics Letters, Vol. 71, 2024
5. "aHeterogeneous hexagonal honeycombs with nature-inspired defect channels under in-plane crushing"
   Amin Montazeri, Amirhossein Saeedi, Ehsan Bahmanpour, Majid Safarabadifarahani
   MATERIALS LETTERS, Vol. 366, No 136564, 2024
6. "Micromechanical modeling and experimental study of the flexural properties of impregnated woven textile-reinforced concrete"
   Rohollah Ghasemi, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi, Abolfazl Mirdehghan
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2024
7. "Prediction of last ply failure load of keyhole notched laminated composites using the virtual isotropic material concept"
   Saeid Alirezaeipour, Mohammad Sadegh Amirinia, Majid Safarabadifarahani, Seyed Mehdi Ganjiani, Mojtaba Haghighi Yazdi
   JOURNAL OF COMPOSITE MATERIALS, Vol. 1, No 1, pp.1-23, 2023
8. "Developing rapid expressions for calculating average strain energy density and J-integral in VO-notched components under tension"
   Mohammad Sadegh Amirinia, Saeid Alirezaeipour, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi
   Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 46, No 1, 2023
9. "Optimum design of coaxial FRP/steel tube joints under tensile loading"
   Majid Safarabadifarahani, Masoud Shariat Panahi
   Materials Chemistry and Mechanics, Vol. 1, No 4, pp.1-14, 2023
10. "A Poisson's ratio sign-switching mechanical metamaterial with tunable stiffness"
    Amin Montazeri, Ehsan Bahmanpour, Majid Safarabadifarahani
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 260, No 1, 2023
11. "Enhancing the Compressive Properties of Re-entrant Honeycombs by Line Defects with Insight from Nature"
    Amin Montazeri, Amirhossein Saeedi, Ehsan Bahmanpour, Majid Safarabadifarahani
    Materials Today Communications, Vol. 38, No 1, 2023
12. "Reinforcement of 3D‐Printed Re‐Entrant Structures using Additional Supports under Three‐Point Bending, Experimental and Numerical Analyses"
    Mahdi Zahed, Romina Ardeshiri Jouneghani, Majid Safarabadifarahani
    ADVANCED ENGINEERING MATERIALS, Vol. 1, No 1, pp.1-14, 2023
13. "Numerical Analysis of Thermal Buckling of Honeycomb Core Sandwich Panel under Thermal Loading"
    Majid Safarabadifarahani, Mehran Shahryari, Amin Montazeri, Amin Mohammadi Barkchay
    Mechanics of Advanced Composite Structures, Vol. 10, No 2, pp.333-342, 2023
14. "Fabrication and Optimal Design of a Mechanical Piezoelectric Energy Harvester with Re-entrant Honeycomb Substrate for Maximizing Voltage Output"
    Mohamad Hossein Fatahi, Mohsen Hamedi, Majid Safarabadifarahani
    International Journal of Precision Engineering and Manufacturing, Vol. 1, No 1, pp.1-13, 2023
15. "Investigating the transient angle in a unidirectional composite in tension and compression"
    [] [], [] [], Majid Safarabadifarahani
    JOURNAL OF COMPOSITE MATERIALS, Vol. 1, No 1, pp.1-19, 2023
16. "Bending performance and failure mechanism of 3D-printed hybrid geometry honeycombs with various poisson’s ratios"
    [] [], Amirhossein Hassani, Majid Safarabadifarahani
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, Vol. 1, No 1, pp.1-21, 2023
17. "Experimental and analytical study of flexural creep of impregnated woven fabric-reinforced concrete"
    Rohollah Ghasemi, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi, Abolfazl Mirdehghan
    COMPOSITE STRUCTURES, Vol. 321, No 1, 2023
18. "Numerical and Analytical Investigation Into the Effects Of Stacking Sequences on the Distortion of Asymmetric Composite Laminates in the Curing Cycle"
    Mohsen Mobarakian, Majid Safarabadifarahani, Mohammadreza Farahani
    MECHANICS OF COMPOSITE MATERIALS, Vol. 59, No 3, pp.455-468, 2023
19. "Three‐point Bending Behavior of Foam‐filled Conventional and Auxetic 3D‐printed Honeycombs"
    Amin Montazeri, Ehsan Bahmanpour, Majid Safarabadifarahani
    ADVANCED ENGINEERING MATERIALS, Vol. 1, No 1, pp.1-17, 2023
20. "Performance and damage mechanism assessment of sandwich composites with glass/kenaf/epoxy skins and a novel core using quasi-static penetration"
    Amin Montazeri, Abbas Rahmani, Majid Safarabadifarahani
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 45, No 5, 2023
21. "On the ballistic impact behavior of foam-filled honeycomb core/composite skin sandwich panels"
    Meysam Khodaei, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi, Mohammad Amin Farzannia
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 45, No 5, 2023
22. "A Comprehensive Numerical Study of the Effect of Hybrid Reinforcement of Fiber Sizing on the Transverse Elastic Modulus of Polymeric Nanocomposite"
    احسان حیاتی, Majid Safarabadifarahani, Mahdi Moghimi Zand
    Physical Mesomechanics, Vol. 26, No 2, pp.209-223, 2023
23. "A numerical comparison between aged and non-aged composite patches on repaired aluminum 7075-T6 plate"
    Ali Shivaie Kojouria, Majid Safarabadifarahani, Dara Parvas
    Materials Chemistry and Mechanics, Vol. 1, No 1, pp.74-87, 2023
24. "Investigation of viscoelastic properties in composite sandwich panels subjected to low-velocity impact: Experimental and numerical approaches"
    Milad Hosseinkhani, Seyed Hamed Ghavami, Mojtaba Haghighi Yazdi, Mahmoud Mousavi Mashhadi, Majid Safarabadifarahani
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, Vol. 1, No 1, 2023
25. "Crashworthiness analysis of a composite guardrail under impact loading"
    Iman Mohamadi, Mojtaba Haghighi Yazdi, Majid Safarabadifarahani, Armin Yousefi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 1, No 1, 2023
26. "Numerical & Experimental Assessment of Mixed-Modes (I/II) Fracture of PMMA/ Hydroxyapatite Nanocomposite"
    Morteza Ataei-Aazam, Majid Safarabadifarahani, Mohammad Beygzade, Nabi Mehri Khansari
    THEORETICAL AND APPLIED FRACTURE MECHANICS, Vol. 1, No 12, 2022
27. "A comparative study on adding chopped kenaf fibers to the core of glass/epoxy laminates under quasi-static indentation: Experimental and numerical approaches"
    [] [], Majid Safarabadifarahani
    JOURNAL OF COMPOSITE MATERIALS, Vol. 1, No 10, 2022
28. "Textile-reinforced mortars; an experimental comparative study of tensile strength improvement methods"
    Rohollah Ghasemi, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi, Abolfazl Mirdehghan
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 1, No 1, 2022
29. "Experimental and numerical investigation of low velocity impact on hybrid short-fiber reinforced foam core sandwich panel"
    Alireza Sharei, Majid Safarabadifarahani, Mahmoud Mousavi Mashhadi, Reza Souri Solut, Mojtaba Haghighi Yazdi
    JOURNAL OF COMPOSITE MATERIALS, Vol. 1, No 1, 2021
30. "Numerical analysis of linear and nonlinear buckling instability of plates made of topologically interlocked materials"
    Milad Zakeri, Marzieh Majidi, Mojtaba Haghighi Yazdi, Majid Safarabadifarahani
    MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. 1, No 1, pp.1-13, 2021
31. "Effects of delamination in drilling glass/polyester composite"
    Seyed Mehdi Ganjiani, Majid Safarabadifarahani, Nabi Mehri Khansari, Hossein Oroji
    Frontiers of Structural and Civil Engineering, Vol. 1, No 1, 2021
32. "Numerical study of fatigue behavior of the aluminum 7075-T6 cantilever beam with angular cracks in different stress ratios"
    Ebrahim Mohammadi Dehcheshmeh, Majid Safarabadifarahani, Mahmoud Mousavi Mashhadi, Muzli Mustapha
    Engineering Solid Mechanics, Vol. 9, No 1, pp.77-92, 2021
33. "Experimental and numerical study of buckling behavior of foam-filled honeycomb core sandwich panels considering viscoelastic effects"
    Majid Safarabadifarahani, Mojtaba Haghighi Yazdi, Mohammadali Sorkhi, Armin Yousefi
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, Vol. 1, No 1, 2020
34. "Experimental and Numerical Investigation of Low-Velocity Impact on Steel Wire Reinforced Foam Core/Composite Skin Sandwich Panels"
    Pouya Mohammadkhani, Seyed Siavash Jalali, Majid Safarabadifarahani
    COMPOSITE STRUCTURES, Vol. 1, No 1, 2020
35. "Numerical investigation of high velocity impact on foam-filled honeycomb structures including foam fracture model"
    Meysam Khodaei, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. 1, No 1, pp.1-13, 2020
36. "Numerical study of curing thermal residual stresses in GF/CNF/epoxy nanocomposite using a random generator model"
    Arash Jafarpour, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi, Armin Yousefi
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. 1, No 1, pp.1-11, 2020
37. "Developing a thermomechanical and thermochemical model for investigating the cooling rate effects on the distortion of unsymmetrical viscoelastic polymeric composite laminates"
    Mohsen Mobarakian, Majid Safarabadifarahani, Mohammadreza Farahani
    POLYMER TESTING, Vol. 1, No 1, 2020
38. "Investigating the effects of cooling rate on distortion of asymmetric composite laminates"
    Mohsen Mobarakian, Majid Safarabadifarahani, Mohammadreza Farahani
    COMPOSITE STRUCTURES, Vol. 236, No 1, 2020
39. "Experimental and numerical fatigue life study of cracked AL plates reinforced by glass/epoxy composite patches in different stress ratios"
    kasra Hosseini, Majid Safarabadifarahani, Seyed Mehdi Ganjiani, Ebrahim Mohammadi, Arya Hosseini
    MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. 1, No 1, pp.1-18, 2020
40. "Design and Manufacture of a Smart Macro-Structure with Changeable Effective Stiffness"
    Mohammad reza Hajyghasem, Majid Safarabadifarahani, Azadeh Sheidaei, Mostafa Baghani, Majid Baniassadi
    International Journal of Applied Mechanics, Vol. 12, No 1, 2020
41. "Design of micro-vibration isolation system for a remote-sensing satellite payload using viscoelastic materials"
    Majid Safarabadifarahani, Hossein Izi, Javad Haghshenas, Hamed Koochaki Kelardeh
    Engineering Solid Mechanics, Vol. 8, No 1, pp.69-76, 2020
42. "Numerical study of GFRP joints bearing strength reduction due to drilling-induced delamination"
    Majid Safarabadifarahani, Mehdi Sardar
    JOURNAL OF COMPOSITE MATERIALS, Vol. 1, No 1, 2019
43. "Numerical investigation of oriented CNFs effects on thermo-mechanical properties and curing residual stresses field of polymeric nanocomposites"
    Arash Jafarpour, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi
    MECHANICS OF MATERIALS, Vol. 138, 2019
44. "Semi-analytical study of thick polymer composites behavior during curing process"
    Vahid Teimouri, Majid Safarabadifarahani
    Engineering Solid Mechanics, Vol. 8, No 1, pp.205-216, 2019
45. "Combined GA-ANN Approach for Prediction of HAZ and Bearing Strength in Laser Drilling of GFRP Composite"
    Ali Solati, Mohsen Hamedi, Majid Safarabadifarahani
    OPTICS AND LASER TECHNOLOGY, Vol. 1, No 1, pp.1-12, 2018
46. "Comprehensive investigation of surface quality and mechanical properties in CO2 laser drilling of GFRP composites"
    Ali Solati, Mohsen Hamedi, Majid Safarabadifarahani
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 1, No 1, pp.1-21, 2018
47. "Experimental and numerical investigation of loading speed effect on the bearing strength of glass/epoxy composite joints"
    Farhad Nazari, Majid Safarabadifarahani
    COMPOSITE STRUCTURES, Vol. 195, No 1, pp.211-218, 2018
48. "An investigation into the effects of fiber architecture on the mechanical behavior of woven preforms"
    Majid Safarabadifarahani, Hadi Feiz Mohammadi
    JOURNAL OF THE TEXTILE INSTITUTE, Vol. 1, No 1, pp.1-9, 2018
49. "Finite element prediction of curing micro-residual stress distribution in polymeric composites considering hybrid interphase region"
    Vahid Teimouri, Majid Safarabadifarahani
    Engineering Solid Mechanics, Vol. 6, No 1, pp.11-20, 2018
50. "Novel Parameters in Load Capacity and Failure of Coaxial Steel Tubes Jointed by Wrapped GFRP Sleeve"
    Mohammad Mahdi Shahryarifard, محمد گلزار , Majid Safarabadifarahani
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, Vol. 1, No 1, pp.1-39, 2017
51. "Hygro-mechanical vibration analysis of a rotating viscoelastic nanobeam embedded in a visco-Pasternak elastic medium and in a nonlinear thermal environment"
    Moslem Mohammadi, Majid Safarabadifarahani, Abbas Rastgo Ghamsari, Ali Farajpour
    ACTA MECHANICA, Vol. 1, No 1, pp.1-26, 2016
52. "Evaluation of curing residual stresses in three-phase thin composite laminates considering micro-scale effects"
    Majid Safarabadifarahani
    JOURNAL OF COMPOSITE MATERIALS, Vol. 1, No 1, pp.1-12, 2016
53. "Effect of Surface Energy on the Vibration Analysis of Rotating Nanobeam"
    Majid Safarabadifarahani, Moslem Mohammadi, Ali Farajpour, Mohammad Goodarzi
    Journal of solid mechanics, Vol. 7, No 3, pp.299-311, 2015
54. "Prediction of equivalent static loads act on a micro satellite via modal analysis"
    Majid Safarabadifarahani, Solmaz Bazargan
    Engineering Solid Mechanics, Vol. 3, No 2, pp.75-84, 2015
55. "Prediction of calibration factors of the hole-drilling method for orthotropic composites including hybrid interphase region"
    Majid Safarabadifarahani
    JOURNAL OF COMPOSITE MATERIALS, pp.1-9, 2014
56. "An experimental investigation of HA/AL2O3 nanoparticles on mechanical properties of restoration materials"
    Majid Safarabadifarahani, Nabi Mehri Khansari, عباس رضایی
    Engineering Solid Mechanics, Vol. 2, No 3, pp.173-182, 2014
57. "A new three-dimensional analytical model to simulate microresidual stresses in polymer matrix composites"
    Mahmood Mehrdad Shokrieh, Majid Safarabadifarahani, Ahmadreza Ghaanee
    MECHANICS OF COMPOSITE MATERIALS, Vol. 48, No 3, pp.273-284, 2012
58. "Three-dimensional analysis of micro-residual stresses in fibrous composites based on the energy method: a study including interphase effects"
    Mahmood Mehrdad Shokrieh, Majid Safarabadifarahani
    JOURNAL OF COMPOSITE MATERIALS, Vol. 46, No 6, pp.727-735, 2012
59. "Effects of imperfect adhesion on thermal micro-residual stresses in polymer matrix composites"
    Mahmood Mehrdad Shokrieh, Majid Safarabadifarahani
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, Vol. 31, No 6, pp.490-497, 2011
60. "Effect of fibre transverse isotropy on micro-residual stresses in polymeric composites"
    Mahmood Mehrdad Shokrieh, Majid Safarabadifarahani
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 46, No 8, pp.817-824, 2011
61. "Redesign, modal analysis and stress analysis of cross car beam"
    Majid Safarabadifarahani, MOHSEN SEDAGHAT
    Journal of Sciences and Technology of Composites, Vol. 10, No 4, pp.2363-2376, 2024
62. "Life cycle estimation of notched polymer base dental composites reinforced with nanoparticles"
    محمد بیگ زاده, Majid Safarabadifarahani, مرتضی عطایی اعظم, نبی مهری خوانساری
    Journal of Sciences and Technology of Composites, Vol. 9, No 2, pp.1-7, 2022
63. "Investigating the effect of Nano-additives orientations on buckling strength of polymeric Nanocomposite plates reinforced by CNT and Nanoclay"
    Mahdi Neghabi, Majid Safarabadifarahani
    Journal of Sciences and Technology of Composites, Vol. 8, No 2, 2021
64. "Investigation on the Reinforcing Effects of Using Nanoparticle on Quasi-Static Loading of the Glass-Epoxy Composites"
    Sadegh Hoseinlaghab, Mohammadreza Farahani, Majid Safarabadifarahani
    Mechanical Engineering modares, Vol. 21, No 8, 2021
65. "Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading"
    Mehdi Najaf Poor, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi
    Journal of Sciences and Technology of Composites, Vol. 7, No 4, pp.1-6, 2021
66. "Numerical study of the effect of glass fiber sizing reinforcement by randomly distributed CNTs on the glass/epoxy composite mechanical properties"
    احسان حیاتی, Majid Safarabadifarahani, Mahdi Moghimi Zand
    Journal of Sciences and Technology of Composites, Vol. 6, No 4, pp.511-524, 2020
67. "Analytic model for investigation of effect of temperature change on residual stress and curvature of symmetric and unsymmetric composite laminates"
    Pezhman Khoshrooz, Mohammadreza Farahani, Majid Safarabadifarahani, سعید ظهوری
    Mechanical Engineering modares, Vol. 19, No 9, pp.2155-2164, 2019
68. "Numerical investigation of the effect of material strain rate dependent properties on high velocity impact behavior and ballistic limit velocity of honeycomb structures"
    Meysam Khodaei, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi
    Journal of Sciences and Technology of Composites, Vol. 5, No 3, pp.1-10, 2018
69. "Numerical study of delamination in drilling of Glass/Polyester and investigation of mode 𝚰𝚰 fracture contribution"
    Seyed Mehdi Ganjiani, Hosein Orouji, Majid Safarabadifarahani
    Mechanical Engineering modares, Vol. 17, No 8, pp.173-181, 2017
70. "Finite element study of the failure mode and influence of effective Parameters on strength of sandwich structure joints used in satellite"
    Majid Safarabadifarahani, Hossein Bigdeli
    space technology and Knowledge, Vol. 6, No 1, pp.1-14, 2017
71. "Finite element simulation of high velocity impact on polymer composite plates"
    Majid Safarabadifarahani, Parham Ashkani, Seyed Mehdi Ganjiani
    Journal of Sciences and Technology of Composites, Vol. 2, No 3, pp.1-12, 2016
72. "Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite"
    Mohammadreza Mohammad Aliha, Atefeh Moosavi, Nabi Mehri Khansari, Majid Safarabadifarahani
    Journal of Sciences and Technology of Composites, Vol. 2, No 2, pp.9-16, 2015
73. "More accurate evaluation of curing residual stress field considering interphase characteristics"
    Majid Safarabadifarahani
    Journal of Sciences and Technology of Composites, Vol. 1, No 1, pp.3-12, 2014
74. "Influence of Physical, Thermal and Mechanical Parameters on Micro Residual Stresses in Polymeric Composites"
    Mahmood Mehrdad Shokrieh, Majid Safarabadifarahani
    Ianian journal of polymer science and technology, Vol. 24, No 5, pp.355-368, 2011

Conference Paper

1. "Finding transient angle in tension for unidirectional composites"
   Majid Safarabadifarahani, [] []
   The 8th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-8), 2022
2. "Damage Mechanism of Glass/Epoxy Laminates with a Novel Core Layer under Quasi-Static Indentation: A Comparative Study on Using Kenaf, Glass, and their Hybrids as Laminate Skins"
   [] [], [] [], Majid Safarabadifarahani
   The 8th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-8), 2022
3. "Glass/Epoxy laminates with Novel Core Layers Under Quasi-Static Indentation: A Comparative Experimental and Numerical Study on Using Chopped Natural and Synthetic Fibers as a Core Layer"
   [] [], Majid Safarabadifarahani
   The 8th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-8), 2022
4. "Experimental Investigation of the Cooling Rate Effect on Final Shape of Asymmetric Composite Laminates"
   Mohsen Mobarakian, Majid Safarabadifarahani, Mohammadreza Farahani
   The 7 th International Conference on Composites: Characterization, Fabrication and Application (CCFA-7), 2020
5. "The Effect of Geometrical Parameters on the Impact Strength of Steel Wire Reinforced Sandwich Structures"
   Seyed Siavash Jalali, Pouya Mohammadkhani, Majid Safarabadifarahani
   The 7 th International Conference on Composites: Characterization, Fabrication and Application (CCFA-7), 2020
6. "Experimental Investigation of GFRP Reinforced Concrete Tensile Strength Using Brazilian Test Method"
   Seyed Siavash Jalali, Majid Safarabadifarahani, Pouya Mohammadkhani
   The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2020), 2020
7. "Numerical Investigation on Honeycomb Foam Filling and Honeycomb Density Increasing in Ballistic Impact Behavior"
   Meysam Khodaei, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi
   The 6th International Conference on Composites: Characterization, Fabrication and Application (CCFA-6), 2018
8. "Finite Element Analysis of Piping Composite Joints under Bending Load"
   Mohsen Aliyari, Majid Safarabadifarahani, Masoud Shariat Panahi
   The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5), 2016
9. "Reinforcement of welded metal tubes joints using polymeric laminated composites"
   Pedraam Pakzadian, Majid Safarabadifarahani, Seyed Mehdi Ganjiani
   The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5), 2016
10. "Optimization of Fiber-Reinforced Plastic (FRP) /Metal Joints using the Complex Method"
    Mohsen Aliyari, Majid Safarabadifarahani, Masoud Shariat Panahi
    The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5), 2016
11. "Micro-Thermal Residual Stress Concentration in Three-Phase Fiber-Reinforced Composites"
    Majid Safarabadifarahani
    The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), 2014
12. "Effect of aluminum oxide and hydroxyapatite Nano particles on mechanical properties of dental Nano-composites (PMMA/ HA/Al2O3)"
    Majid Safarabadifarahani, Abbas Rezaei, Nabi Mehri Khansari
    The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014), 2014
13. "Evaluation of VIMC performance on rapid prediction of fracture load of VO-notched composite specimens under mode I loading"
    محمد صادق امیری نیا, سعید علیرضایی پور, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi
    Third conference of composite applications in Iran industuries, 2023
14. "Prediction of last ply failure in key-notched composite laminates using virtual isotropic material concept"
    سعید علیرضایی پور, محمد صادق امیری نیا, Majid Safarabadifarahani, Seyed Mehdi Ganjiani, Mojtaba Haghighi Yazdi
    Third conference of composite applications in Iran industuries, 2023
15. "Development of 3-D printer for production of continious-glass fiber reinforced composite experimental samples"
    [] [], محمد مهدی قنبرپور بروجنی, Mojtaba Haghighi Yazdi, Majid Safarabadifarahani
    Third conference of composite applications in Iran industuries, 2023
16. "study of the geometric factors of the notched semi-circular bending specimen using the finite element method"
    مرتضی عطایی اعظم, Majid Safarabadifarahani, محمد بیگ زاده, نبی مهری خوانساری
    6th international conference ontechnology development in mechanical and aerospace engineering, 2022
17. "Investigating the effect of the number of cores on low velocity impact behavior of sandwich panels with composite facesheets and foam core"
    Alireza Sharei, Milad Hosseinkhani, Mahmoud Mousavi Mashhadi, Mojtaba Haghighi Yazdi, Majid Safarabadifarahani
    25th Annual International Conference on Mechanical Engineering, 2017
18. "Investigating the behavior of low velocity impact in sandwich panels with composite face sheets and multiple cores"
    Milad Hosseinkhani, Alireza Sharei, Mahmoud Mousavi Mashhadi, Majid Safarabadifarahani, Mojtaba Haghighi Yazdi
    Application of Composites in the Industry of Iran, 2017
19. "simulation & analysis of vehicle body crash using fifnite element method"
    Majid Safarabadifarahani, Baharan Poor Ahmadi, Zahra Sadat Mahdian Sadr
    simulation & analysis of vehicle body crash using fifnite element method, 2016
20. "Investigation of a micro satellite structural properties on its effective vibration modes"
    Mohammadreza Roosta, Majid Safarabadifarahani
    5th International Conference on Acoustics and Vibration, 2015
21. "finite element modeling & analysis of sandwich panel joints with honeycomb core used in satellite structure"
    Majid Safarabadifarahani, Hossein Bigdeli
    finite element modeling & analysis of sandwich panel joints with honeycomb core used in satellite structure, 2015
22. "Investigation of the geometrical parameters effect on laminated GFRP/steel circular tube joints"
    Mohammad Mahdi Shahryarifard, Mohammad Golzar, Majid Safarabadifarahani
    1st international conference on composite pipes, vessels and tanks, 2015
23. "Optimization of laminated GFRP pipe/steel tube joints under axial tensile loads"
    Mohammad Mahdi Shahryarifard, Mohammad Golzar, Majid Safarabadifarahani
    1st international conference on composite pipes, vessels and tanks, 2015