Journal Paper

1. "Additive manufactured parts surface treatment through impinged hot air jet technique the theoretical and experimental evaluation"
   Amin Barzegar, Mohammadreza Farahani, Amirreza Gomroki
   RAPID PROTOTYPING JOURNAL, Vol. 30, No 5, pp.858-875, 2024
2. "Evaluating the effect of repair using direct laser metal deposition on the fracture resistance of the cracked 1.2714 tool steel component"
   Mojtaba Rezaee Hajideh, Mohammadreza Farahani
   Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 46, No 125, pp.1-15, 2024
3. "Investigating the Excellence of Different Thermography Approaches to Subsurface Dis-bonds Detection in Aluminum Honeycomb Sandwich Structures"
   Reza Souri, Mohammadreza Farahani, Pouriya Meshkizadeh, Saeed Asghari
   JOURNAL OF NONDESTRUCTIVE EVALUATION, Vol. 42, No 4, pp.1-20, 2023
4. "Nondestructive evaluation of cooling passages and their blockage using vapor excited active thermography"
   Mohammad Mostafa Khalili, Mohammadreza Farahani, Pouya Faraji Kalajahi, Milad Mohammadian
   Nondestructive Testing and Evaluation, Vol. 37, No 5, pp.1-16, 2023
5. "Evaluation of residual strength in fiber reinforced composites subjected to impact using acoustic emission test"
   Reza Souri-Solut, Mohammadreza Farahani, Pouriya Meshkizadeh, Mohammad Sadegh Ghani
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 237, No 21, 2023
6. "Tension-after-impact analysis and damage mechanism evaluation in laminated composites using AE monitoring"
   Sadegh Hosein laghab shobi, Mohammadreza Farahani, Majid Safarabadifarahani, Majid Nikkhah
   MECHANICAL SYSTEMS AND SIGNAL PROCESSING, Vol. 186, No 1, 2023
7. "Direct laser metal deposition cladding of IN718 on DIN 1.2714 tool steel reinforced by the SiC nanoparticles"
   Mojtaba Rezaee Hajideh, Mohammadreza Farahani
   Journal of Materials Research and Technology-JMR&T, Vol. 23, No 1, pp.2020-2030, 2023
8. "Experimental correlation between microstructure, residual stresses and mechanical properties of friction stir welded 2024-T6 aluminum alloys"
   Majid Farhang marani, Mohammadreza Farahani, Mohammad Nazari, Omid Sam Daliri
   International Journal Of Advanced Design And Manufacturing Technology, Vol. 15, No 3, pp.1-9, 2022
9. "Delamination Defect Evaluation in CFRP Composite Patches by the Use of Active Thermography"
   Amirreza Ardebili, Mohammadreza Farahani
   JOURNAL OF NONDESTRUCTIVE EVALUATION, Vol. 41, No 3, 2022
10. "Nondestructive inspection of gas turbine blades by active thermography using different fluids"
    MILAD MOHAMMADIAN, Akbari Davood, Mohammadreza Farahani, Pouya Faraji Kalajahi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 236, No 12, pp.1553-1563, 2022
11. "Comparison and identification of efficient nanoparticles to improve the impact resistance of glass/epoxy laminates: Experimental and numerical approaches"
    Sadegh Hoseinlaghab, Mohammadreza Farahani, Majid Safarabadifarahani, S. S. Jalali
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. 29, No 6, pp.1-16, 2022
12. "Developing effective thermal signal processing to improve thermographic non-destructive inspection of metallic components"
    Pouriya Meshkizadeh, Mohammadreza Farahani
    NONDESTRUCTIVE TESTING AND EVALUATION, Vol. 37, No 4, pp.367-385, 2022
13. "Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on the AL2024T3 Joint Strength"
    Majid Farhang, Mohammadreza Farahani, Moeen Enami
    International Journal Of Advanced Design And Manufacturing Technology, Vol. 14, No 4, pp.105-112, 2021
14. "Evaluation of local constitutive properties of Al2024 friction stir-welded joints using digital image correlation method"
    Ali Shahmirzaloo, Mohammadreza Farahani, Majid Farhang
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 56, No 7, pp.419-429, 2021
15. "Improving the impact resistance of the multilayer composites using nanoparticles"
    Sadegh Hoseinlaghab, Mohammadreza Farahani, Majid Safarabadifarahani
    MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. 20, No 1, pp.1-17, 2021
16. "Effect of friction stir welding parameters on the residual stress distribution of Al-2024-T6 alloy"
    Majid Farhang, Omid Sam Daliri, Mohammadreza Farahani, Azadeh Vatani
    Journal of Mechanical Engineering and Sciences, Vol. 15, No 1, pp.7684-7694, 2021
17. "Structural health monitoring of adhesive joints under pure mode I loading using the electrical impedance measurement"
    Omid Sam Daliri, Lisa-marie Faller, Mohammadreza Farahani, Hubert Zangl
    ENGINEERING FRACTURE MECHANICS, Vol. 245, No 1, 2021
18. "Transient liquid phase bonding of Cu and Al using metallic particles interlayers"
    Alireza Zaheri, Mohammadreza Farahani, Alireza Sadeghi, Naser Souri
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 20, No 1, 2021
19. "Experimental Study on the influences of different surface treatment processes and adhesive type on the aluminum adhesive-bonded joint strength"
    Amir Safari, Mohammadreza Farahani, Pouyan Ghabezi
    MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. 49, No 1, 2020
20. "Structural health monitoring of defective single lap adhesive joints using graphene nanoplatelets"
    Omid Sam Daliri, Mohammadreza Farahani, Lisa-marie Faller, Hubert Zangl
    Journal of Manufacturing Processes, Vol. 55, No 1, pp.119-130, 2020
21. "Adhesive composite joint reinforcement using button shape interlocking features"
    Mahdi Amiri, Mohammadreza Farahani
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, Vol. 102, No 1, 2020
22. "Surface integrity of metal matrix nanocomposite produced by friction stir processing (FSP)"
    Navid Molla Ramezani, Behnam Davoodi, Mohammadreza Farahani, Abolfazl Hossein Khanli
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 41, No 11, 2020
23. "Condition monitoring of crack extension in the reinforcement adhesive joints by carbon nanotubes"
    Omid Sam Daliri, Mohammadreza Farahani, Alireza Araee
    Welding Technology Review, Vol. 91, No 12, pp.7-15, 2020
24. "Defect evaluation of the honeycomb structures formed during the drilling process"
    Pouyan Ghabezi, Mohammadreza Farahani, Ali Shahmirzaloo, Hamid Ghorbani, N M Harrison
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 29, No 3, pp.454-466, 2020
25. "A cohesive model with a multi-stage softening behavior to predict fracture in nano composite joints"
    Pouyan Ghabezi, Mohammadreza Farahani
    ENGINEERING FRACTURE MECHANICS, Vol. 219, No 1, 2019
26. "Friction Stir Weld of AZ91 Magnesium Alloy With and Without Nano-SiC Particle"
    Mohammad Farzami, Mohammadreza Farahani, Davood Akbari, Mohammad Tabasi
    JOM, Vol. 71, No 11, 2019
27. "Corrosion resistance and hydrophilic properties of plasma sprayed Ni+5%Al coatings"
    Mojtaba Rezaee Hajideh, Mohammadreza Farahani, Mohammadjavad Pakravan, Ali Shahmirzaloo
    Heliyon, Vol. 5, No 6, 2019
28. "Using digital image correlation for characterizing the elastic and plastic parameters of ultrafine-grained Al 1050 strips fabricated via accumulative roll bonding process"
    Davood Rahmatabadi, Ali Shahmirzaloo, Ramin Hashemi, Mohammadreza Farahani
    Materials Research Express, Vol. 6, No 8, 2019
29. "Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC"
    Davood Rahmatabadi, Ali Shahmirzaloo, Mohammadreza Farahani, Mohammad Tayyebi, Ramin Hashemi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 753, No 1, pp.70-78, 2019
30. "Correlation between the Weld Residual Stresses and its Tensile and Impact Strength"
    Majid Sabokroh, Mohammadreza Farahani
    Journal of Applied and Computational Mechanics, Vol. 5, No 4, pp.727-734, 2019
31. "Experimental investigation of the effects of adhesive defects on the single lap joint strength"
    Farhad Heydarpour, Mohammadreza Farahani, Pouyan Ghabezi
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, Vol. 80, No 1, pp.128-132, 2019
32. "The influences of the cyclic force magnitude and frequency on the effectiveness of the vibratory stress relief process on a butt welded connection"
    Mohammad Ebrahimi, Mohammadreza Farahani, Davood Akbari
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 101, No 1, pp.20-211, 2019
33. "Impedance analysis for condition monitoring of single lap CNT-epoxy adhesive joint"
    Omid Sam Daliri, Lisa-marie Faller, Mohammadreza Farahani, Ali Roshanghias, Alireza Araee, Majid Baniassadi, Hannes Oberlercher, Hubert Zangl
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, Vol. 88, No 1, pp.59-65, 2019
34. "Characterization of cohesive model and bridging laws in mode I and II fracture in nanocomposite laminates"
    Pouyan Ghabezi, Mohammadreza Farahani
    Journal of Mechanical Engineering and Sciences, Vol. 12, No 4, pp.4329-4355, 2018
35. "Reinforced Dissimilar Friction Stir Weld of Polypropylene to Acrylonitrile Butadiene Styrene with Copper Nanopowder"
    Mojtaba Rezaee Hajideh, Mohammadreza Farahani, Navid Molla Ramezani
    Journal of Manufacturing Processes, Vol. 32, No 1, pp.445-454, 2018
36. "Comprehensive Investigation on the Mechanical Properties of Friction Stir Composite Joint from Polyethylene - Polypropylene"
    Mojtaba Rezaee Hajideh, Mohammadreza Farahani, Omid Shapoorgan
    International Journal of Manufacturing Research, Vol. 13, No 3, 2018
37. "Finite Element Crushing Analysis, Neural Network Modelling and Multi-Objective Optimization of the Honeycomb Energy Absorbers"
    Mahdi Vakili, Mohammadreza Farahani, Abolfazl Khalkhali
    International Journal Of Advanced Design And Manufacturing Technology, Vol. 11, No 1, pp.51-59, 2018
38. "Study on the new friction stir spot weld joint reinforcement technique on 5754 aluminum alloy"
    Hossein Andalib, Mohammadreza Farahani, Moeen Enami
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 232, No 17, pp.2976-2986, 2018
39. "Trapezoidal traction–separation laws in mode II fracture in nano-composite and nano-adhesive joints"
    Pouyan Ghabezi, Mohammadreza Farahani
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, Vol. 37, No 11, pp.780-794, 2018
40. "Determination of local constitutive properties of aluminum using digital image correlation: A comparative study between uniform stress and virtual fields"
    Ali Shahmirzalo, Mohammadreza Farahani
    International Journal Of Advanced Design And Manufacturing Technology, Vol. 12, No 1, pp.9-18, 2018
41. "Experimental study of the residual stresses in girth weld of natural gas transmission pipeline"
    Majid Sabokroh, Mohammadreza Farahani
    Journal of Applied and Computational Mechanics, Vol. 5, No 2, pp.199-206, 2018
42. "MWCNT–Epoxy Nanocomposite Sensors for Structural Health Monitoring"
    Omid Sam Daliri, Lisa-marie Faller, Mohammadreza Farahani, Ali Roshanghias, Hannes Oberlercher, Tobias Mitterer, Alireza Araee, Hubert Zangl
    ELECTRONICS, Vol. 7, No 8, 2018
43. "Novel study on keyhole less friction stir spot welding of Al 2024 reinforced with alumina nanopowder"
    Moeen Enami, Mohammadreza Farahani, Majid Farhang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 100, No 1, pp.110-124, 2018
44. "Process analysis of resistance spot welding on the Inconel alloy 625 using artificial neural networks"
    Hossein Tavakolli, Mohammadreza Farahani, Majid Sohrabian
    International Journal of Manufacturing Research, Vol. 12, No 4, pp.444-460, 2017
45. "Experimental and numerical study on the composite adhesive joint reinforcement using wavy edge"
    Fayyaz Nosouhi, Mohammadreza Farahani, Mahdi Ansari
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, Vol. 32, No 9, pp.1007-1017, 2017
46. "A combined numerical and statistical analysis for prediction of critical buckling load of the cylindrical shell with rectangular cutout"
    Omid Sam Daliri, Mohammadreza Farahani, Majid Farhang
    Engineering Solid Mechanics, Vol. 7, No 1, pp.35-46, 2017
47. "A Hybrid Thermal Assisted Friction Stir Welding Approach for PMMA sheets"
    Mojtaba Rezaee Hajideh, Mohammadreza Farahani, Masoud Ahmad Khanbeigi
    Modern Applied Science, Vol. 6, No 2, pp.51-60, 2017
48. "Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure"
    Omid Sam Daliri, Mohammadreza Farahani
    International Journal Of Advanced Design And Manufacturing Technology, Vol. 2, No 10, pp.133-143, 2017
49. "Investigation on the effects of tool geometry on the microstructure and the mechanical properties of dissimilar friction stir welded polyethylene and polypropylene sheets"
    Mojtaba Rezaee Hajideh, Mohammadreza Farahani, Seyed Amir Davoud Alavi, Navid Molla Ramezani
    Journal of Manufacturing Processes, Vol. 26, No 26, pp.269-279, 2017
50. "A reinforcing technique for the adhesive bonded composite joints using metallic wires"
    Mohammadreza Kaji, Mohammadreza Farahani, Mahdi Ansari
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, Vol. 31, No 17, pp.1963-1975, 2017
51. "Experimental investigation of nanoparticles effects on cohesive model and bridging laws of mode I fracture in the adhesive joints"
    Pouyan Ghabezi, Mohammadreza Farahani
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, Vol. 31, No 16, pp.1807-1823, 2017
52. "Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles"
    Pouyan Ghabezi, Mohammadreza Farahani
    Journal of Computational Applied Mechanics, Vol. 47, No 2, pp.231-239, 2016
53. "Experimental Investigation of Nano-Alumina Effect on the Filling Time in Vartm Process"
    Pouyan Ghabezi, Mohammadreza Farahani, Mohammad Hosseini Fakhr
    Journal of Fundamental and Applied Sciences, Vol. 8, No 2, pp.925-940, 2016
54. "Investigation of Mechanical Behavior of Alfa and Gamma Nano- Alumina/Epoxy Composite Made By Vartm"
    Pouyan Ghabezi, Mohammadreza Farahani, Mohammad Hosseini Fakhr, Hamid Abroshan
    INTERNATIONAL JOURNAL OF ADVANCED BIOTECHNOLOGY AND RESEARCH, Vol. 7, No 3, pp.731-736, 2016
55. "Dissimilar friction stir welding of 7075 aluminum alloy to AZ31 magnesium alloy using SiC nanoparticles"
    Mohammad Tabasi, Mohammadreza Farahani, Mohammad Kazem Besharati Givi, Mohammad Farzami, Ali Moharami
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 90, No 2, 2015
56. "Investigation on the Effects of the Weld Groove Shape on the Residual Stress Formation in the Butt-Welded Plates"
    Mohammadreza Farahani, Setayesh Hakak-zargar, Davood Akbari
    Scientia Iranica, Vol. 23, No 5, pp.2230-2237, 2015
57. "Study on the effects of friction stir welding process parameters on the microstructure and mechanical properties of 5086-H34 aluminum welded joints"
    Hasan Mohammadzadeh Jamalian, Mohammadreza Farahani, Mohammad Kazem Besharati Givi, Mohamad Aghaei Vafaei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 83, pp.611-621, 2015
58. "Experimental study of the weld microstructure properties in assembling of natural gas transmission pipelines"
    Majid Sabokroh, Hojat Hashemi, Mohammadreza Farahani
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 229, No 4, pp.580-590, 2015
59. "Numerical and experimental investigation on the effects of submerged arc welding sequence on the residual distortion of the fillet welded plates"
    Setayesh Hakak-zargar, Mohammadreza Farahani, Mohammad Kazem Besharati Givi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 1, No 230, 2015
60. "Investigation of drilling composite sandwich structures"
    Mohammad Khoran, Pouyan Ghabezi, Mohammadreza Farahani, Mohammad Kazem Besharati Givi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 76, No 76, pp.1937-1936, 2014
61. "Compressive deformation behavior modeling of AZ31 magnesium alloy at elevated temperature considering the strain effect"
    Ghadir Nourollahi, Mohammadreza Farahani, Ali Babakhani, Saeed Mirjavadi
    Materials Research-Ibero-american Journal of Materials, Vol. 8, No 16, pp.130-136, 2013
62. "Numerical and experimental investigation of defect detection in polymer materials by means of digital shearography with thermal loading"
    Davood Akbari, Naser Soltani, Mohammadreza Farahani
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 3, No 227, pp.430-442, 2013
63. "Effects of the weld groove shape and geometry on residual stresses in dissimilar butt-welded pipes"
    Davood Akbari , Mohammadreza Farahani, Naser Soltani
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, Vol. 47, No 2, pp.73-82, 2012
64. "Numerical and experimental investigations of effects of residual stresses on crack behavior in Aluminum 6082 - T6"
    Mohammadreza Farahani, Iradj Sattari Far , Davood Akbari
    Journal of Mechanical Engineering Science, Vol. 226, No 9, pp.2178-2191, 2012
65. "Effect of residual stresses on crack behaviour in single edge bending specimens"
    Mohammadreza Farahani, Iraj Sattari Far , Davood Akbari , Rene Alderliesten
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. -, pp.1-12, 2012
66. "Effects of residual stresses on crack - tip constraints"
    Mohammadreza Farahani, Iraj Sattari Far
    Scientia Iranica, Vol. 18, No 6, pp.1267-1276, 2011
67. "Employing Thermal Contrast Definitions to Improve Defect Detection Capability in Thermography Non-Destructive Testing"
    Keyhan Nategh, Mohammadreza Farahani, Majid Farhang
    Nondestructive Testing Technology, Vol. 3, No 3, pp.27-37, 2023
68. "Non-Destructive Testing of the Welded Joints Using Infrared Thermography Technique"
    Abbas Bayati, Mohammadreza Farahani
    Nondestructive Testing Technology, Vol. 3, No 3, pp.13-26, 2023
69. "Experimental investigating the effect of heat input on the strength of dissimilar welded joints of IN 713LC and AISI 4140 by electron beam welding method"
    Hamidreza Banooei, Mohammadreza Farahani
    Journal of Manufacturing Engineering, Vol. 9, No 9, pp.45-54, 2022
70. "Evaluating the Circular Defect Detection Capability in Thermography Testing by the Use of Analytical Method"
    Keyhan Nategh, Mohammadreza Farahani
    Nondestructive Testing Technology, Vol. 3, No 11, pp.23-31, 2022
71. "Experimental and numerical investigation of the vibration stress relief process on a T- shape welded joint"
    Pouria Shahfaragh, Mohammadreza Farahani, Majid Safarabadifarahani, Majid Farhang marani
    Journal of Manufacturing Engineering, Vol. 9, No 1, pp.43-53, 2022
72. "Improving the Nondestructive Thermography Inspection Results for Detection of Circular Defects in Coated Metals Using Principal Component Analysis"
    Keyhan Nategh, Mohammadreza Farahani
    Nondestructive Testing Technology, Vol. 2, No 9, pp.33-40, 2022
73. "Nondestructive evaluation of impact area on glass fiber reinforced polymer composite by digital image correlation method: experimental study"
    Mohammadjavad Pakravan, Mohammadreza Farahani, Amin Barzegar, Mahdi Mahmoudi
    Mechanical Engineering modares, Vol. 22, No 3, pp.179-190, 2022
74. "Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale"
    Ali Asadi, Mohammadreza Farahani, Shobo Salehpour, Hossein Yosafi
    Iranian journal of wood and paper industries (IJWP), Vol. 12, No 3, pp.419-428, 2021
75. "Investigation on the Reinforcing Effects of Using Nanoparticle on Quasi-Static Loading of the Glass-Epoxy Composites"
    Sadegh Hoseinlaghab, Mohammadreza Farahani, Majid Safarabadifarahani
    Mechanical Engineering modares, Vol. 21, No 8, 2021
76. "Incorporation of Al2O3 powder for improvement of the mechanical and metallurgical properties of multi-passes friction stir welding of Al 2024"
    Majid Farhang, Mohammadreza Farahani, [] []
    Journal of Manufacturing Engineering, Vol. 8, No 3, pp.35-46, 2021
77. "Condition monitoring of defective single lap adhesive joint using carbon nanotubes"
    Omid Sam Daliri, Mohammadreza Farahani
    Amirkabir Journal of Mechanical Engineering, Vol. 53, No 2, pp.1321-1330, 2021
78. "Thermal Signal Reconstruction and Empolyment of K Clustering Method for Inspection of Additive Manufactured Polymer Parts"
    Pouriya Meshkizadeh, Mojtaba Rezaee Hajideh, Mohammadreza Farahani, Mohammad Heidari-Rarani
    Nondestructive Testing Technology, Vol. 2, No 7, pp.60-69, 2021
79. "Nondestructive Evaluation of Gas Turbine Blade Cooling Holes Blockage by Thermography"
    Ali Mohammad Kolagar Kolagar, Mohammad Cheraghzadeh, Akbari Davood, Mohammadreza Farahani
    Nondestructive Testing Technology, Vol. 2, No 6, pp.46-52, 2021
80. "Implementing Thermal Image Processing Techniques for Enhancing the Detectability of Defects in Thermography of Additive Manufacturing Components"
    Pouriya Meshkizadeh, Mohammadreza Farahani, Mojtaba Rezaei, Mohammad Heidari-Rarani
    Nondestructive Testing Technology, Vol. 2, No 6, pp.36-45, 2020
81. "Identification of Delamination Defects in Metal-Composite Shells Using Pulse Thermography"
    Amirreza Ardebili, Mohammadreza Farahani
    Mechanical Engineering modares, Vol. 20, No 9, 2020
82. "Applying pulse thermography technique for corrosion defect evaluation on the steel plates"
    Alireza Ahmadi, Mohammadreza Farahani, Amirreza Ardebili
    Journal of Manufacturing Engineering, Vol. 7, No 5, pp.24-32, 2020
83. "Experimental Study on the Effects of Harmonic Vibration on the Stress Relief of the Butt Welded AISI 1021 Pipes"
    Amirhossein Zamanpour, Mohammadreza Farahani, Majid Farhang, Navid Vafa
    Journal of Manufacturing Engineering, Vol. 7, No 2, pp.1-7, 2020
84. "Thermography of the cooling channels using steam heating"
    Mohammad Mostafa Khalili, Mohammadreza Farahani, Saeed Asghari
    Journal of Manufacturing Engineering, Vol. 7, No 1, pp.39-44, 2020
85. "Thermography with Radiation Excitation for Non-Destructive Evaluation of Composite and Sheet Metal"
    Amirreza Ardebili, Mohammadreza Farahani, Saeed Asghari
    Nondestructive Testing Technology, Vol. 2, No 5, 2020
86. "Evaluation of Damage in Composite Laminated Sheets with Circular Defects under Tensile Loading Using Digital Image Correlation Method"
    Mohammadjavad Pakravan, Mohammadreza Farahani
    Mechanical Engineering modares, Vol. 20, No 4, pp.1024-1031, 2020
87. "Experimental investigation of the Annealing Effect on the Mechanical Properties of Girth Welding Using Nanoparticles on Gas Transmission Pipeline"
    Majid Sabokroh, Mohammadreza Farahani
    Mechanical Engineering modares, Vol. 20, No 5, pp.1107-1113, 2020
88. "Experimental Analysis of GTAW Welding Parameters Effects on the Mechanical and Metallurgical Properties of ST37 Carbon Steel- AISI304 Stainless Steel Dissimilar Welded Joints"
    محمد امین فروتن محرمی, فرامرز آشنای قاسمی, Mohammadreza Farahani
    Journal of Mechanical Engineering University of Tabriz, Vol. 49, No 2, pp.229-238, 2019
89. "Using of Modulated Thermography for Nondestructive Testing of Polymer Plates"
    Reza Khoshkbari Rezaieh, Mohammadreza Farahani, Majid Safarabadifarahani, Saeed Asghari
    Nondestructive Testing Technology, Vol. 2, No 4, pp.38-45, 2019
90. "Analysis of Variance of Residual Stress Distribution in Girth Welding of High Strength Low Alloy Steel Gas Pipeline"
    Majid Sabokroh, Mohammadreza Farahani
    Mechanical Engineering modares, Vol. 19, No 7, pp.1789-1795, 2019
91. "Characterizing of the plastic and elastic property of aluminum sheet produced by CRB process via DIC method"
    D.. Rahmat Abadi, Ali Shahmirzaloo, Mohammadreza Farahani, Ramin Hashemi
    Mechanical Engineering modares, Vol. 1, No 1, 2019
92. "Evaluation of longitudinal residual stress variations along the thickness of welded joint of 5086 aluminum alloy"
    [] [], Mahdi Ahmadi, Mohammadreza Farahani
    Journal of solid and fluid mechanis, Vol. 7, No 3, pp.1-16, 2018
93. "Study on the Effects of Sanding on the Strength of the Adhesive Joints"
    Amir Safari, Mohammadreza Farahani
    Amirkabir Journal of Mechanical Engineering, Vol. 50, No 3, pp.619-626, 2018
94. "Influence of Planar Discontinuities on the Sheet Adhesive Joint Strength"
    Pouyan Ghabezi, Mohammadreza Farahani
    Structural Engineering, Vol. 5, No 2, pp.172-183, 2018
95. "Mathematical modeling of residual stress distribution in girth welding of high strength low alloy steel gas pipelines"
    Majid Sabokroh, Mohammadreza Farahani
    Mechanical Engineering modares, Vol. 18, No 4, pp.990-996, 2018
96. "Comparison of the effects of shotblasting and sandblasting processes on the strength of the aluminum adhesive bonded joints"
    Amir Safari, Mohammadreza Farahani
    Amirkabir Journal of Mechanical Engineering, Vol. 50, No 5, pp.1015-1022, 2018
97. "Simulation of the Residual Stresses Distribution in Girth Weld of Gas Transmission Pipeline"
    Majid Sabokroh, Mohammadreza Farahani
    Mechanical Engineering modares, Vol. 19, No 1, pp.223-228, 2018
98. "Evaluation of Ultrasonic Method Capability in Measurement of Longitudinal Welding Residual Stress through Thickness"
    M.. Eftekhari, Mahdi Ahmadi Najafabadi, Mohammadreza Farahani
    Journal of solid and fluid mechanis, Vol. 8, No 3, pp.29-47, 2018
99. "Investigation on the Affecting parameters on the Quality Improvement of Adhesive Joints in the Packing Industries"
    Mohammadreza Kaji, Mohammadreza Farahani
    علوم و فنون بسته بندی, Vol. 8, No 29, 2017
100. "Cladding of Carbon Steel with Aluminum Stainless Layer Using Friction Stir Welding Method"
     Ali Zohrehvand, Mohammadreza Farahani
     Mechanical Engineering modares, Vol. 99, No 9, pp.1-11, 2017
101. "Investigation on the Effects of Residual Stresses on the Static and Fracture Stresngth of the Weld-zone ..."
     Majid Sabokroh, Hojat Hashemi, Mohammadreza Farahani
     journal of Petroleum Research, Vol. 26, No 86, 2016
102. "Investigation on the effects of the number and diameter of the wires on the strength of the reinforced adhesive joint of composites"
     Mohammadreza Kaji, Mohammadreza Farahani, Mahdi Ansari
     Journal of Manufacturing Engineering, Vol. 20, No 4, 2016
103. "Investigation on the effect of wave shape and number on the strengthening of wavy adhesive joints"
     Fayyaz Nosouhi, Mohammadreza Farahani, Mahdi Ansari
     Journal of Manufacturing Engineering, Vol. 20, No 3, 2016
104. "Optimization of drilling process on corrugated core sandwich panels"
     Pouyan Ghabezi, Mohammadreza Farahani, Mohammad Kazem Besharati Givi
     Mechanical Engineering modares, Vol. 15, No 13, pp.107-112, 2015
105. "Investigation on the effects of using Nano-size Al2O3 powder on the mechanical and microstructural in the multi-passes continuous friction stir welding of the 2024-T6"
     Mohammad Nazari, Mohammad Kazem Besharati Givi, Mohammadreza Farahani, Javad Mollaei Milani, Hasan Mohammadzaeh Jamaliyan
     Mechanical Engineering modares, Vol. 14, No 12, pp.85-90, 2014
106. "Investigation on the Effects of Welding Parameters on the Submerged Arc Welding Efficiency"
     Setayesh Hakak-zargar, Mohammadreza Farahani, Mohammad Kazem Besharati Givi
     Mechanical Engineering modares, Vol. 13, No 12, pp.79-87, 2013
107. "Investigation on the Weldability of the Circumferential Multipass Welded . . ."
     Hojat Hashemi, Majid Sabokroh, Mohammadreza Farahani
     Mechanical Engineering modares, Vol. 13, No 4, pp.60-73, 2013
108. "Investigation on the Relation Between the Microstructure, Mechanical Properties and Residual Stress..."
     Majid Sabokroh, Hojat Hashemi, Mohammadreza Farahani
     journal of Petroleum Research, Vol. 24, No 76, 2013

Conference Paper

1. "Comparative analysis of Mechanical properties, microstructures of Ti6Al4V parts manufactured by Electron Beam Welding and Selective Laser Melting"
   Mohammadreza Farahani, Moeen Enami
   10th International conference on Mechanical Engineering, Material and Metallurgy, 2023
2. "A Comparison between Nondestructive testing of gas turbine blades by active IR Thermography using optical and water-vapor excitations"
   Pouya Faraji Kalajahi, Akbari Davood, Mohammadreza Farahani, MILAD MOHAMMADIAN
   Seventh National Conference on Gas Turbines, 2022
3. "Application of water vapor excitation in the Non-Destructive Evaluation of gas turbine blades by active thermography"
   MILAD MOHAMMADIAN, Akbari Davood, Mohammadreza Farahani, Pouya Faraji Kalajahi
   6th Iranian Nondestructive Testing International Conference, 2021
4. "Evaluation of mechanical properties of Resistance Spot Welding and Friction Stir Spot Welding on Aluminium Alloys"
   Moeen Enami, Mohammadreza Farahani, Majid Sohrabian
   International Conference on researches in Science and Engineering, 2016
5. "Investigation on the Influences of Welding Process Parameters on the Remained Stress Distribution"
   Davood Akbari, Mohammadreza Farahani
   2015 International Conference on Intelligent Materials and Manufacturing Engineering (IMME2015), 2015
6. "Experimental and Numerical Evaluation of composite-metal Adhesive Bonded Joints and Study on Effective Parameters"
   Emad Sadeqzadeh Naeini, Mohammadreza Farahani, Pouyan Karami
   The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), 2014
7. "Investigation on the effect of SAW sequence on the distortion in butt welded plates"
   Setayesh Hakak-zargar, Mohammadreza Farahani, Alireza Araee
   International Conference on Brazing, Soldering and Special Joininng technologies, 2014
8. "Vibration stress relief of welded steel shell and semi-destructive evaluation of residual stress by hole drilling method"
   Majid Farhang marani, Mohammadreza Farahani, Davood Akbari
   The 7th Iranian International NDT Conference, 2024
9. "Evaluating the Tensile Properties of Glass and Carbon Fiber Reinforced Polymer Composites using the Digital Image Correlation Method"
   Hussein Naghdi, Mohammadreza Farahani, Pouya Faraji Kalajahi
   The 7th Iranian International NDT Conference, 2024
10. "Investigating contrast improvement algorithms of thermal images for non-destructive evaluation of debonding defects in thermal barrier coatings (TBC)"
    Mohammad Amin Zarezadeh Mehrizi, Mohammadreza Farahani, Majid Safarabadifarahani, Majid Farhang, Mojtaba Rezaee Hajideh
    The 7th Iranian International NDT Conference, 2024
11. "Evaluating the residual stresses of the train axle by the hole drilling strain gauge method based on the requirements of the EN 13261 standard"
    Majid Farhang, Mohammadreza Farahani, Akbari Davood
    The 8th International Conference on Recent Advances in Railway Engineering (ICRARE 2023), 2023
12. "Evaluating the residual stresses of the train wheels by the hole drilling strain gauge method based on the requirements of the EN 13262 standard"
    Majid Farhang, Mohammadreza Farahani, Akbari Davood
    The 8th International Conference on Recent Advances in Railway Engineering (ICRARE 2023), 2023
13. "Application of ring core and hole drilling strain gauge measurement techniques for the residual stresses evaluation of the gas turbine components"
    Majid Farhang marani, Mohammadreza Farahani, Akbari Davood
    Seventh National Conference on Gas Turbines, 2022
14. "Manufacturing a sampling device using the semi-destructive scoop method"
    Vahid Shirazi, Meysam Khodabakhshi, Maesome Soheyli, Mohammadreza Farahani, Akbari Davood
    The 30th Annual International Conference of the Iranian Association of Mechanical Engineers, 2022
15. "Investigation of the effect of hatch space parameter on mechanical properties of titanium alloy produced by SLM additive manufacturing method by DIC technique"
    Morteza Zarnegar, Mohammadreza Farahani, Yaser Vahidshad, Mohammadjavad Pakravan
    4th International Conference on Welding and Non Destructive Testing, 2022
16. "Improving images in nondestructive evaluation of fiber-reinforced composite parts using pulse thermography method"
    Mohammad Pourghasemi, Mohammadreza Farahani
    6th Iranian Nondestructive Testing International Conference, 2020
17. "Employment of non-destructive inspection method of short pulse thermography to inspect fiber-reinforced composite parts"
    Mohammad Pourghasemi, Mohammadreza Farahani
    6th Iranian Nondestructive Testing International Conference, 2020
18. "Employment of the Pulse Phase technique in the Thermographic Nondestructive Evaluation"
    Pouriya Meshkizadeh, Mohammadreza Farahani, Mohammad Pourghasemi, Saeed Asghari
    The 28th Annual International Conference of the Iranian Society of Mechanical Engineering, 2020
19. "Investigating the effect of number of layers in infrared non-destructive testing of composite patches reinforced with glass fibers"
    Amirreza Ardebili, Mohammadreza Farahani, Mohammad Pourghasemi
    16th Annual and 5th International Conference on Manufacturing Engineering (ICME2018), 2019
20. "Investigation on the effect of fiber material on nondestructive evaluation of the composite patches using pulse thermography"
    Amirreza Ardebili, Mohammadreza Farahani, Pouriya Meshkizadeh
    16th Annual and 5th International Conference on Manufacturing Engineering, 2019
21. "Reconstructing and upgrading the active thermography images for identifying the defects in metal parts"
    Pouriya Meshkizadeh, Mohammadreza Farahani, Amirreza Ardebili
    16th Annual and 5th International Conference on Manufacturing Engineering (ICME2018), 2019
22. "Natural frequency calculation and modal analysis in the vibration stress relief method for reducing the welding residual stresses."
    Navid Vafa, Mohammadreza Farahani
    The 9th International Conferences on the Acoustics and Vibration, 2019
23. "Nondestructive testing of composite laminates using DIC"
    Mohammadjavad Pakravan, Mohammadreza Farahani
    27th annual international conference of Iranian society of mechanical engineering, 2019
24. "Experimental Study on Vibration Stress Relief in a welded joint"
    Navid Vafa, Mohammadreza Farahani
    27th annual international conference of Iranian society of mechanical engineering, 2019
25. "Employment of Modulated thermography for nondestructive testing of the honeycomb sandwich panel core"
    Reza Khoshkbari Rezaieh, Mohammadreza Farahani
    27th annual international conference of Iranian society of mechanical engineering, 2019
26. "Introduction to Residual Stress and Experimental study on Vibration Stress Relief"
    Navid Vafa, Mohammadreza Farahani, Amirhossein Zamanpour
    5th International Conference on Apllied Resaerch in Electrical, Mechanical and Mechatronics Engineering, 2019
27. "Study on Vibration Stress Relief Techniques with Experimental study on Vibration Stress Relief of the Welded Joint"
    Navid Vafa, Mohammadreza Farahani, Amirhossein Zamanpour
    4th National Congress of Mechanical Engineering and Chemical Engineering, 2019
28. "Non destructive test in girth weld at natural gas transmission pipelines"
    Majid Sabokroh, Mohammadreza Farahani
    5th Iranian International Nondestructive Testing Conference, 2018
29. "Non-destructive evaluation of defects of low carbon steel plates using pulsed thermography method"
    Alireza Ahmadi, Mohammadreza Farahani, Amirreza Ardebili
    5th International Nondestructive Testing Conference, 2018
30. "Evaluation of residual stresses using hole drilling strain gage test"
    Majid Sabokroh, Mohammadreza Farahani
    5th Iranian International Nondestructive Testing Conference, 2018
31. "A new generation of lockin thermography with optical or ultrasound stimulation"
    Navid Vafa, Mohammadreza Farahani
    5th Iranian International Nondestructive Testing Conference, 2018
32. "effect of material properties on defect detection for metallic plates using pulsed thermography"
    Alireza Ahmadi, Mohammadreza Farahani, Amirreza Ardebili
    5th International Nondestructive Testing Conference, 2018
33. "Coating of AZ31 magnesium alloy with Ni5Al powder by plasma spraying at different nuzzle distances and corrosion properties study using electrochemical impedance spectra and potentiodynamic polarization"
    Mohammadjavad Pakravan, Mohammadreza Farahani, Mojtaba Rezaee Hajideh
    International Conference on Mechanical Engineering, Industries and Aerospace, 2018
34. "Effects of pass number on the contact angle of the coating of AZ31 magnesium alloy by Ni5Al powder"
    Mohammadjavad Pakravan, Mohammadreza Farahani, Mojtaba Rezaee Hajideh
    International Conference on Mechanical Engineering, Industries and Aerospace, 2018
35. "Investigation on the impact failure in composite structures using ultrasonic testing"
    Navid Hassanzade, Mohammadreza Farahani, Nima Kadivar
    The 4th Iranian International NDT Conference, 2017
36. "Cladding of St37 steel with Al 6061-T6 using friction stir welding technique"
    Ali Zohrehvand, Mohammadreza Farahani
    The 16th international conference of Iranian aerospace society, 2017
37. "Investigation on the effects of subsize and step size on the accuracy of elastic modulus measurement using digital image correlation method"
    Ali Shahmirzalo, Mohammadreza Farahani, Davood Akbari
    The 16th international conference of Iranian Aerospace Society, 2017
38. "Investigation of mechanical properties and metallurgical structure in the fabrication process of aluminum-steel double layer sheet"
    Ali Zohrehvand, Mohammadreza Farahani
    International conference on Applied Research in Electrical, Mechanical and Mechatronics Engineering, 2017
39. "Experimental Investigation of the Single Lap Joint Strength with Rectangular, Triangular and Circular 3D Defects"
    Pouyan Ghabezi, Mohammadreza Farahani
    2nd International Conference on Research in Science and Technology, 2016
40. "Defect Size Evaluation in the Adhesive Joint Using Lamb Waves"
    Nima Kadivar, Mohammadreza Farahani, Farhang Honarvar
    6th International Conference on Acoustics and Vibration, 2016
41. "Defect Shape Detection in the Adhesive Joints Using Lamb Waves"
    Nima Kadivar, Mohammadreza Farahani, Farhang Honarvar
    6th International Conference on Acoustics and Vibration, 2016
42. "Experimental Study on the Effects of Adhesive Type and Shot Blast on the Adhesive Joint Strength"
    Amir Safari, Mohammadreza Farahani
    2nd International Conference on New Research Achievements in Mechanics, Industrial and Aerospace Engineering, 2016
43. "Experimental study on the effects of cohesive type and sandblast surface preparation on the strength of adhesive single lap joint"
    Amir Safari, Mohammadreza Farahani
    2nd International Conference on New Research Achievements in Mechanics, Industrial and Aerospace Engineering, 2016
44. "Study on the Effects of Sanding on the adhesive Joints from AA2024-T3 Alloy"
    Amir Safari, Mohammadreza Farahani
    Thirteenth Conference of Materials and Metallurgical Engineering of Iran, 2016
45. "Experimental Study on the Effects of Sanding on the Adhesive Single Lap Joint Strength"
    Amir Safari, Mohammadreza Farahani
    Thirteenth Conference of Materials and Metallurgical Engineering of Iran, 2016
46. "Experimental Study on the Influences of Surface Roughness on the Adhesive Joint Strength of Aluminium Alloys"
    Amir Safari, Mohammadreza Farahani
    Thirteenth Conference of Materials and Metallurgical Engineering of Iran, 2016
47. "Study of the Dynamic Forces applied to the Fifth Wheel of Semitrailer in Different Working Conditions"
    Davod Pourabdollah, Mohammadreza Farahani, Sohrab Narestan Talesh
    1St International Conference on New Research Achievements in Mechanics, Mechatronics & Biomechanics, 2016
48. "Investigation on the Effects of Tire Spring Rate on the Dynamic Behavior of Semi-trailers in Crossing the Road Obstacles"
    Mahdi Sajadipour, Mohammadreza Farahani, Sohrab Narestan Talesh
    1St International Conference on New Research Achievements in Mechanics, Mechatronics & Biomechanics, 2016
49. "Investigation on the Effects of Suspension System parameters on the Dynamic Behavior of Semi-trailers in Crossing the Road Obstacles"
    Sohrab Narestan Talesh, Mohammadreza Farahani
    1St International Conference on New Research Achievements in Mechanics, Mechatronics & Biomechanics, 2016
50. "Experimental Investigation of the Single Lap Aluminium Joint Strength with Different 2D Defects"
    Farhad Heydarpour, Mohammadreza Farahani, Pouyan Ghabezi
    International Conference on Engineering and Applied Sciences, 2016
51. "Comparison between the Phased Array Ultrasonic Testing and Radiography in Detection of Dangerous Defects in Welds of Thick Sections"
    Saeed Moshayedi, Mohammadreza Farahani
    3rd Iranian International Nondestructive Testing Conference - IRNDT2016, 2016
52. "Nondestructive Evaluation of Residual Stresses in the Friction Stir Welding of AL 2024T6"
    Majid Farhang, Mohammadreza Farahani, Mohammad Nazari
    3rd Iranian International Nondestructive Testing Conference - IRNDT2016, 2016
53. "Nondestructive Study on the Effects of Friction Stir Welding Process Parameters on the Magnitudes of Welding Residual Stresses"
    Majid Farhang, Mohammadreza Farahani, Mohammad Nazari
    3rd Iranian International Nondestructive Testing Conference - IRNDT2016, 2016
54. "Comparison between the Adhesive Joint Strength with Quadratic Stress Criterion using Cohesive Zone Modeling Technique"
    Emad Sadeghzadeh, Mohammadreza Farahani, Mohamadali Ansari, Mohsen Mazroee
    ISME2015, 2015