Journal Paper

1. "Evaluation of the Surface Integrity and Recast Layer in Electrical Discharge Turning of WC-Co Composites"
   Mehdi Soleymani, Mohamadjafar Hadad
   Micromachines, Vol. 15, No 6, 2024
2. "Exploring New Parameters to Advance Surface Roughness Prediction in Grinding Processes for the Enhancement of Automated Machining"
   Mohamadjafar Hadad, Samareh Attarsharghi, Mohsen Dehghanpour, Parviz Narimani, Javad Makarian, Alireza Saberi, Amir Alinaghizadeh
   Journal of Manufacturing and Materials Processing, Vol. 8, No 1, 2024
3. "Towards Industry 4.0 and Sustainable Manufacturing Applying Environmentally Friendly Machining of a Precipitation Hardened Stainless Steel Using Hot Turning Process"
   Mohamadjafar Hadad, Seyed Mohammad Ebrahimi
   Applied Sciences-Basel, Vol. 13, No 22, 2023
4. "Experimental Study of the Surface Quality of Form-Cutting Tools Manufactured via Wire Electrical Discharge Machining Using Different Process Parameters"
   Amir Alinaghizadeh, Mohamadjafar Hadad, Bahman Azarhoushang
   Micromachines, Vol. 14, No 11, 2023
5. "Experimental Investigation of the Effects of Machining Parameters on the Performance of Form-Cutting Tools Manufactured by Wire Electrical Discharge Machining (WEDM) and Grinding Processes"
   Amir Alinaghizadeh, Mohamadjafar Hadad, Bahman Azarhoushang
   Micromachines, Vol. 14, No 10, 2023
6. "Using machine learning and optimization for controlling surface roughness in grinding of St37"
   Mohsen Dehghanpour, Parviz Narimani, Mohamadjafar Hadad, Samareh Attarsharghi
   Energy Equipment and Systems, Vol. 11, No 3, pp.321-337, 2023
7. "An Experimental Investigation of the Effects of Dressing and Grinding Parameters on Sustainable Grinding of Inconel 738 Used for Automated Manufacturing"
   Mohamadjafar Hadad, Samareh Attarsharghi, Javad Makarian, Ali Mahdiani
   Processes, Vol. 11, No 10, 2023
8. "A Hybrid Approach for Predicting Critical Machining Conditions in Titanium Alloy Slot Milling Using Feature Selection and Binary Whale Optimization Algorithm"
   Amirsajjad Rahmani, Faramarz Hojati, Mohamadjafar Hadad, Bahman Azarhoushang
   machines, Vol. 11, No 8, 2023
9. "Experimental investigation on the environmentally friendly turning of Al7075 using ultrasonic nozzle-minimum quantity lubrication (UN-MQL) system"
   Saeed Sattari, Mohamadjafar Hadad
   Energy Equipment and Systems, Vol. 11, No 2, pp.193-211, 2023
10. "Evaluation of the Forming Limit Diagram (FLD) for St-Mg-St Multilayer Sheet Manufactured by Transient Liquid Phase (TLP) Bonding"
    Vahid Chenarani, Ali Mahdiani, Mohamadjafar Hadad, M. Hossein Sehhat, Mohsen Hedayati Dezfooli, Alireza Araee
    Metallography Microstructure and Analysis, Vol. 1, No 1, pp.1-13, 2022
11. "Experimental investigation of the effects of cutting parameters on machinability of ECAP-processed ultrafine-grained copper using tungsten carbide cutting tools"
    Javad Fatahi doolatabadi, Mohamad mahdi Rafiee, Mohamadjafar Hadad, Ghader Faraji, Mohsen Hedayati-dezfooli
    Energy Equipment and Systems, Vol. 10, No 3, pp.241-254, 2022
12. "Experimental investigation of the effect of single point dressing parameters on grinding of Mo40 hardened steel using mounted point grinding tool"
    Mohamadjafar Hadad, JAVAD GHOLAMPOUR DARZI, Ali Mahdiani, Javad Makarian
    Energy Equipment and Systems, Vol. 10, No 2, pp.197-214, 2022
13. "A Numerical and Experimental Study into Thermal Behavior of Micro Friction Stir Welded Joints of Al 1050 and Copper Sheets"
    Ali Mahdiani, M. Hossein Sehhat, Mohamadjafar Hadad
    Advanced Materials Research, Vol. 1170, No 1, pp.49-60, 2022
14. "Formability Investigation for Perforated Steel Sheets"
    M. Hossein Sehhat, Ali Mahdiani, Mohamadjafar Hadad
    SAE International Journal of Materials and Manufacturing, Vol. 15, No 2, 2022
15. "Experimental Study on Micro-Friction Stir Welding of Dissimilar Butt Joints Between Al 1050 and Pure Copper"
    Ali Mahdiani, M. Hossein Sehhat, Mohamadjafar Hadad
    Metallography Microstructure and Analysis, Vol. 1, No 1, pp.1-16, 2021
16. "Experimental and numerical investigation of the effects of preheating temperature on cutting force, chip shape and surface roughness in hot turning of AISI630 hardened stainless steel"
    Seyed Mohammad Ebrahimi, Mohamadjafar Hadad, Alireza Araee
    Energy Equipment and Systems, Vol. 9, No 2, pp.145-158, 2021
17. "Sustainable machining of hardened AISI630 stainless steel using thermally enhanced turning technique"
    Seyed Mohammad Ebrahimi, Mohamadjafar Hadad, Alireza Araee
    MACHINING SCIENCE AND TECHNOLOGY, Vol. 1, No 1, pp.1-20, 2021
18. "Influence of machining conditions on tool wear and surface characteristics in hot turning of AISI630 steel"
    Seyed Mohammad Ebrahimi, Mohamadjafar Hadad, Alireza Araee, Seyed Hamid Ebrahimi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 1, No 1, 2021
19. "A novel approach to improve environmentally friendly machining processes using ultrasonic nozzle–minimum quantity lubrication system"
    Mohamadjafar Hadad, Mohammad Beigi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 1, No 1, pp.1-16, 2021
20. "Experimental investigation of the effects of dressing and coolant-lubricant conditions on grinding of Nickel-based superalloy-Inconel 738"
    Mohamadjafar Hadad, Javad Makarian
    Energy Equipment and Systems, Vol. 9, No 1, pp.27-36, 2021
21. "Investigation and comparison of the effect of graphene nanoplates and carbon nanotubes on the improvement of mechanical properties in the stir casting process of aluminum matrix nanocomposites"
    Mohamadjafar Hadad, Abolfazl Babazade, Majid Safarabadifarahani
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 1, No 1, pp.1-13, 2020
22. "Experimental investigation of the effect of tool material on the performance of AISI 4140 steel in the rotary near dry electrical discharge machining"
    Fereydoon Rajabinasab, Vahid Abedini, Mohamadjafar Hadad, Ramzan Ali Hajighorbani
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2020
23. "A new approach for nanofinishing of complicated-surfaces using rotational abrasive finishing process"
    Aref Azami, Abdolhamid Azizi, Ali Khoshanjam, Mohamadjafar Hadad
    MATERIALS AND MANUFACTURING PROCESSES, Vol. 1, No 11, pp.1-11, 2020
24. "Towards sustainable machining of 17-4 PH stainless steel using hybrid MQL-hot turning process"
    Amirhossein Moghadasi, Mohamadjafar Hadad
    Energy Equipment and Systems, Vol. 7, No 4, pp.339-352, 2019
25. "Some experimental aspects of grinding soft steel under different machining conditions"
    Mohamadjafar Hadad, Alireza Sharbati
    Engineering Science & Technology, Vol. 1, No 1, pp.1-10, 2019
26. "Experimental investigation of the effects of tool initial surface roughness on the electrical discharge machining (EDM) performance"
    Mohamadjafar Hadad, Lan Quang Bui, Cong Thanh Nguyen
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. xxx, pp.1-12, 2017
27. "Experimental investigation into the effects of nozzle position, workpiece hardness, and tool type in MQL turning of AISI 1045 steel"
    Soroush Masoudi, Ana Vafadar, Mohamadjafar Hadad, Farshid Jafarian
    MATERIALS AND MANUFACTURING PROCESSES, Vol. xxx, pp.1-9, 2017
28. "Experimental evaluation of coolant-lubricant properties of nanofluids in ultrasonic assistant MQL grinding"
    Farshad Rabiei, Abdolreza Rahimi, Mohamadjafar Hadad, Mohsen Saberi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 93, pp.3935-3953, 2017
29. "Performance improvement of eco-friendly MQL technique by using hybrid nanofluid and ultrasonic-assisted grinding"
    Farshad Rabiei, Abdolreza Rahimi, Mohamadjafar Hadad
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 93, pp.1001-1015, 2017
30. "Analysis of the effects of dressing and wheel topography on grinding process under different coolant-lubricant conditions"
    Mohamadjafar Hadad, Alireza Sharbati
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 90, 2016
31. "Modeling and analysis of a novel approach in machining and structuring of flat surfaces using face milling process"
    Mohamadjafar Hadad, Mohammadjavad Ramezani
    International Journal of Machine Tools and Manufacture, Vol. 105, pp.32-44, 2016
32. "Thermal Aspects of Environmentally Friendly-MQL Grinding Process"
    Mohamadjafar Hadad, Alireza Sharbati
    Procedia CIRPPP, Vol. 40, No 2016, pp.509-515, 2016
33. "An experimental investigation of the effects of machining parameters on environmentally friendly grinding process"
    Mohamadjafar Hadad
    JOURNAL OF CLEANER PRODUCTION, Vol. xxx, No 1, pp.1-15, 2015
34. "Performance improvement of minimum quantity lubrication (MQL) technique in surface grinding by modeling and optimization"
    M.r. Rabiei, Rahim Rahimi, Mohamadjafar Hadad, علی رضا اشرفی
    JOURNAL OF CLEANER PRODUCTION, Vol. 86, No 1, pp.447-460, 2015
35. "Minimum quantity lubrication-MQL turning of AISI 4140 steel alloy"
    Mohamadjafar Hadad, Banafsheh Sadeghi
    JOURNAL OF CLEANER PRODUCTION, Vol. 54, No 1, pp.332-343, 2013
36. "An investigation on surface grinding of hardened stainless steel S34700 and aluminum alloy AA6061 using minimum quantity of lubrication (MQL) technique"
    Mohamadjafar Hadad, mostafa Hadi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 68, pp.2145-2158, 2013
37. "Thermal analysis of minimum quantity lubrication-MQL grinding process"
    Mohamadjafar Hadad, Banafsheh Sadeghi
    International Journal of Machine Tools and Manufacture, Vol. 63, No 1, pp.1-15, 2012
38. "Temperature and energy partition in minimum quantity lubrication-MQL grinding process"
    Mohamadjafar Hadad, Taghi Tawakoli, Mohammadhoseyn Sadeghi, Banafsheh Sadeghi
    International Journal of Machine Tools and Manufacture, Vol. 54-55, No 2, pp.10-17, 2012
39. "Minimum quantity lubrication in grinding: effects of abrasive and coolant–lubricant types"
    Taghi Tawakoli, Mohamadjafar Hadad, Mohammadhoseyn Sadeghi, Amir Daneshi, Banafsheh Sadeghi
    JOURNAL OF CLEANER PRODUCTION, Vol. 19, pp.2088-2099, 2011
40. "Study on the Effects of Abrasive and Coolant-Lubricant Types on Minimum Quantity Lubrication-MQL Grinding"
    Taghi Tawakoli, Mohamadjafar Hadad, Amir Daneshi, Mohammadhoseyn Sadeghi, Banafsheh Sadeghi
    Advanced Materials Research, Vol. 325, No 1, pp.231-237, 2011
41. "Investigation on minimum quantity lubricant-MQL grinding of 100Cr6 hardened steel using different abrasive and coolant–lubricant types"
    Taghi Tawakoli, Mohamadjafar Hadad, Mohammadhoseyn Sadeghi
    International Journal of Machine Tools and Manufacture, Vol. 50, No 8, pp.698-708, 2010
42. "Influence of oil mist parameters on minimum quantity lubrication – MQL grinding process"
    Taghi Tawakoli, Mohamadjafar Hadad, Mohammadhoseyn Sadeghi
    International Journal of Machine Tools and Manufacture, Vol. 50, No 6, pp.521-531, 2010
43. "An investigation on surface grinding of AISI 4140 hardened steel using minimum quantity lubrication-MQL technique"
    Mohammadhoseyn Sadeghi, Mohamadjafar Hadad, Taghi Tawakoli, Alireza Vesali, Mohsen Emami
    International Journal of Material Forming, Vol. 3, No 4, pp.241-251, 2010
44. "An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication—MQL grinding"
    Taghi Tawakoli, Mohamadjafar Hadad, Mohammadhoseyn Sadeghi, Amir Daneshi, Sepastian Stockert, Abdolreza Rasifard
    International Journal of Machine Tools and Manufacture, Vol. 49, pp.924-932, 2009
45. "Minimal quantity lubrication-MQL in grinding of Ti–6Al–4V titanium alloy"
    Mohammadhoseyn Sadeghi, Mohamadjafar Hadad, Taghi Tawakoli, Mohsen Emami
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 44, pp.487-500, 2008
46. "Experimental Aspects of Grinding Hardened Mo40 Steel Under Different Machining and Dressing Parameters Using Mounted Point Grinding Tool"
    JAVAD GHOLAMPOUR DARZI, Mohamadjafar Hadad, امیر سجاد رحمانی
    Mechanical Engineering modares, Vol. 22, No 10, pp.25-30, 2022
47. "Numerical Analysis of Direct Aged 718 Inconel Alloy Turning Using Power Law Equation"
    امیر سجاد رحمانی, Mohamadjafar Hadad, seyed mohammad Ebrahimi
    Mechanical Engineering modares, Vol. 22, No 10, pp.19-24, 2022
48. "Experimental Investigation on Micro Friction Stir Welding of Al-Cu"
    Ali Mahdiani, Mohamadjafar Hadad
    Journal of Manufacturing Engineering, Vol. 9, No 2, pp.18-29, 2022
49. "Experimental investigation of the effects of hot turning parameters on the cutting tool wear and surface roughness of AISI630 hardened stainless steel"
    Seyed Mohammad Ebrahimi, Mohamadjafar Hadad, Alireza Araee, Seyed Hamid Ebrahimi
    Journal of Manufacturing Engineering, Vol. 8, No 2, pp.52-64, 2021
50. "Investigation of the Effect of Graphene Nano Plates and Carbon Nanotubes on the Improvement of Mechanical Properties of Aluminum Matrix Nanocomposites"
    Abolfazl Babazade, Mohamadjafar Hadad, Majid Safarabadifarahani
    Journal of Sciences and Technology of Composites, Vol. 1, No 1, pp.1-10, 2021
51. "Investigation of the effects of wheel surface topography and coolant-lubricant types on wheel loading in grinding of Inconel 738 using image processing method"
    Mohamadjafar Hadad, Javad Makarian, Mohsen Dehghanpour
    Journal of Manufacturing Engineering, Vol. 7, No 8, pp.10-18, 2020
52. "Investigation of the ring rolling process of the bonded Lead-Tin two-layer ring by finite element method and experimental test"
    Mahdi Abbaszadeh Gorani, Mohamadjafar Hadad, Ali Parvizi
    Mechanical Engineering modares, Vol. 20, No 5, pp.1375-1385, 2020
53. "Experimental Study on surface roughness and quality of Hybrid MQL and Thermally-Enhanced Turning of Stainless Steel 17-4 PH (AISI 630)"
    امیرحسین مقدسی, Mohamadjafar Hadad, Abdoreza Kazemi
    Journal of Manufacturing Engineering, Vol. 6, No 8, pp.21-32, 2020
54. "Investigation and study of the effect of the workpiece rotational speed in near dry electrical discharge machining"
    Fereydoon Rajabinasab, Vahid Abedini, Mohamadjafar Hadad
    Modeling in Engineering, Vol. 16, No 52, pp.2-2, 2018
55. "Performance improvement of eco-friendly MQL technique by using hybrid nanofluid and ultrasonic assisted grinding"
    Abdolreza Rahimi, Farshad Rabiei, Mohamadjafar Hadad
    Mechanical Engineering modares, Vol. 17, No 5, pp.305-315, 2017
56. "An investigation of the effect of grinding wheel surface topography on chip loading using image processing method"
    Alireza Sharbati, Mohamadjafar Hadad
    Mechanical Engineering modares, Vol. 15, No 13, pp.323-331, 2015
57. "Investigation and study the effect of the gas type and pressure on the performance of near dry electrical discharge machining"
    Fereydoon Rajabinasab, Mohamadjafar Hadad, Vahid Abedini
    Mechanical Engineering modares, Vol. 15, No 13, pp.360-364, 2015
58. "Investigation and study of the tool material and the dielectric fluid rate effect on the performance of near dry electrical discharge machining"
    Fereydoon Rajabinasab, Mohamadjafar Hadad, Vahid Abedini, Ramzan Ali Hajighorbani
    Mechanical Engineering modares, Vol. 15, No 13, pp.365-370, 2015
59. "nvestigation of the effect of Minimum Quantity lubrication technique on performance of the grinding of HSS"
    Farshad Rabiei, Abdolreza Rahimi, Mohamadjafar Hadad, Mortaza Ashrafijo
    Mechanical Engineering modares, Vol. 13, No 4, pp.1-12, 2013

Conference Paper

1. "Thermal Aspects of Environmentally Friendly-MQL grinding Process"
   Alireza Sharbati, Mohamadjafar Hadad
   13th Global Conference on Sustainable Manufacturing - Decoupling Growth from Resource Use, 2015
2. "Experimental Aspects of Grinding Hardened Mo40 Steel Under Different Machining and Dressing Parameters Using Mounted Point Grinding Tool"
   JAVAD GHOLAMPOUR DARZI, Mohamadjafar Hadad, امیر سجاد رحمانی
   Conference on Advanced Machining and Machine Tools, 2022
3. "Numerical Analysis of Direct Aged 718 Inconel Alloy Turning Using Power Law Equation"
   امیر سجاد رحمانی, Mohamadjafar Hadad, seyed mohammad Ebrahimi
   Conference on Advanced Machining and Machine Tools, 2022
4. "Experimental study of the effect of electromagnetic field on the quality of deep drilling process"
   Mohammad Ali Mahmoudi, Mohamadjafar Hadad, Ali Mahdiani
   ICME 2021, 2021
5. "Production of aluminum nanocomposites reinforced with carbon nanoparticles with the aim of improving mechanical properties, microstructure and increasing efficiency in industrial applications"
   Abolfazl Babazade, Majid Safarabadifarahani, Mohamadjafar Hadad
   2nd conference of composite application in Iranian industries, 2020
6. "Investigation of the effects of dressing and grinding parameters on surface roughness during grinding of Mo40 hardened steel"
   Mohamadjafar Hadad, JAVAD GHOLAMPOUR DARZI, Javad Makarian
   ISME2020, 2020
7. "Investigation of the effects of dressing and coolant-lubricant parameters on surface integrity in grinding of Inconel 738"
   Mohamadjafar Hadad, Javad Makarian
   ISME2020, 2020
8. "Evaluation of the rolling process of lamellar, non-laminated, and laminated bilayers using FEM"
   مهدی عباس زاده گورانی, Mohamadjafar Hadad
   16th annual and 5th International Conference on Manufacturing Engineering, 2019
9. "Experimental investigation of surface quality of AISI630 steel during hot machining using MQL technique"
   امیرحسین مقدسی, Mohamad Kazemei, Mohamadjafar Hadad
   15th annual and 4th International Conference on Manufacturing Engineering, 2018
10. "Investigation and study the effect of the gas type and pressure on the performance of near dry electrical discharge machining"
    Fereydoon Rajabinasab, Mohamadjafar Hadad, Vahid Abedini
    Conference on advanced machining and machine tools, 2015
11. "An investigation of the effect of grinding wheel surface topography on chip loading using image processing method"
    Alireza Sharbati, Mohamadjafar Hadad
    Conference on advanced machining and machine tools, 2015
12. "Investigation and study of the tool material and the dielectric fluid rate effect on the performance of near dry electrical discharge machining"
    Fereydoon Rajabinasab, Mohamadjafar Hadad, Vahid Abedini, Ramzan Ali Hajighorbani
    Conference on advanced machining and machine tools, 2015
13. "Thermal modeling of grinding processes"
    Alireza Sharbati, Mohamadjafar Hadad
    ICHMT2014, 2014
14. "Experimental investigation of the effects of machining parameters on temperature in turning processes"
    Mohamadjafar Hadad, Alireza Sharbati
    ICHMT2014, 2014