Journal Paper

1. "A deep learning-based multi-view approach to automatic 3D landmarking and deformity assessment of lower limb"
   Reyhaneh Rostamian, Masoud Shariat Panahi, Morad Karimpour, Hadi G. Kashani, Amirhossein Abi
   Scientific Reports, Vol. 15, 2025
2. "Surrogate-based positioning optimization of hip prostheses for minimal stress shielding"
   Mahmoud Mohammadizand, Masoud Shariat Panahi, Morad Karimpour
   MEDICAL ENGINEERING & PHYSICS, Vol. 135, 2024
3. "Biomechanical study of using patient-specific diaphyseal femoral cone in revision total knee arthroplasty (rTKA)"
   Reza Nourishirazi, Ghazaleh Moradkhani, Arash SharafatVaziri, Hamidreza Nematy, Ramin Shayan-moghadam, Morad Karimpour
   Journal of Orthopaedics, Vol. 57, pp.65-71, 2024
4. "Radiographic acceptable zone of endobutton placement in ACL reconstruction: A prospective study"
   Arash Sharafatvaziri, Mohammad Tahami, Maryam Salimi, Hamid Rabie, Fardi Vosoughi, Morad Karimpour, Ghazaleh Moradkhani, Mosayeb Soleymani
   Journal of Experimental Orthopaedics, Vol. 11, No 4, 2024
5. "Comparative finite element analysis of contact and stress distribution in tibiotalar articular cartilage: Healthy versus varus ankles"
   Mohadese Rajaeirad, Morad Karimpour, Mohammad Reza Haeri Yazdi
   Journal of Orthopaedics, Vol. 55, pp.16-22, 2024
6. "Finite Element Assessment of a Novel Patient‐Specific Mandibular Implant for Severely Atrophic Ridge"
   Alireza Parhiz, reza Nourishirazi, AmirAli Asadi, Morad Karimpour
   Biomed Research International, Vol. 2024, 2024
7. "Biomechanical study of effect of tibial posteromedial defect depth and area on primary TKA implant stability"
   Reza Nourishirazi, Mohammad Ayati Firouzabadi, Mehdi Hassanzadeh, Hesam Toofan, Morad Karimpour, Seyed Mohammad Javad Mortazavi
   The Knee, Vol. 49, pp.249-256, 2024
8. "Management of tibial nonunion and osteoarthritis using a 3D-printed titanium cone: A case report"
   Arash Sharafat Vazi, Ghazaleh Moradkhani, Morad Karimpour, Mohammad Naghi Tahmasebi, Soodabeh Esfandiary, Fardis Vosoughi, Reihaneh Hosseini
   Trauma Case Reports, Vol. 48, No 1, 2023
9. "Specimen size effect on behavior of Mg-3Al-1Zn magnesium alloy in macro to micro-scale deformation"
   Tohid khandani, Ghader Faraji, Morad Karimpour
   International Journal of Precision Engineering and Manufacturing, Vol. 1, No 1, 2023
10. "Novel modified triply periodic minimal surfaces (MTPMS) developed using genetic algorithm"
    Saeed Khaleghi, Mostafa Baghani, Morad Karimpour, Masoud Shariat Panahi, Kui Wang, Majid Baniassadi
    Journal of Materials Research and Technology-JMR&T, Vol. 26, No 1, pp.2881-2906, 2023
11. "Tablet Geometry Effect on the Drug Release Profile from a Hydrogel-Based Drug Delivery System"
    Seyed-Farid Mohseni-Motlagh, Roshanak Dolatabadi, Majid Baniassadi, Morad Karimpour, Mostafa Baghani
    Pharmaceutics, Vol. 15, No 7, 2023
12. "Ipsilateral Concurrent Knee Arthroplasty and Tibial Osteotomy with 3D-Printed Patient-Specific Instrumentation"
    Arash Sharafat Vaziri, Morad Karimpour, Mohammad Naghi Tahmasebi, Seyedeh Reihaneh Hossein, Ghazaleh Moradkhani, Sina Javidmehr, Fardis Vosoughi
    JBJS Case Connector, Vol. 13, No 4, 2023
13. "The Effect of Pore Size in 3D-Printed Porous Titanium Implant on Osseo-Integration"
    Ghazaleh Moradkhani, Morad Karimpour, Seyed Mahmoud Taheri
    Iranian Journal of Orthopaedic Surgery, Vol. 20, No 1, 2022
14. "Is a complete anatomical fit of TomoFix plate biomechanically favorable? A parametric study using finite element method"
    Zahra Hayatbakhsh, Farzam Farahmand, Morad Karimpour
    Archives of Bone and Joint Surgery-ABJS, Vol. 10, No 8, 2022
15. "Influence of the angle between tibial and prosthesis mechanical axes on tibial bone remodeling in total knee arthroplasty"
    Hosein Hadizade, Hassan Hadizade, Seyed Mehdi Ganjiani, Morad Karimpour
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol. 1, No 1, 2022
16. "Effect of grain size on fracture behavior of pure magnesium sheet: An in-situ study combined with grain-scale DIC analysis"
    Snia Nazari-Onlaghi, Alireza Sadeghi, Morad Karimpour
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 832, No 1, 2022
17. "Design and Shape Optimization of a Biodegradable Polymeric Stent for Curved Arteries Using FEM"
    Yasaman Baradaran, Mostafa Baghani, Morteza Kazempour, Seyed Kianoosh Hosseini, Morad Karimpour, Majid Baniassadi
    FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, Vol. 7, No 1, 2021
18. "Investigation of the effect of the angle between femoral and prosthesis mechanical axes on bone remodeling of femur in total knee arthroplasty"
    Hassan Hadizade, Hosein Hadizade, Seyed Mehdi Ganjiani, Morad Karimpour, Abolfazl Hosseinpour
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol. 1, No 1, 2021
19. "Fracture micro-mechanisms in hot-rolled AZ31 and AZ31-Sr magnesium alloys"
    Snia Nazari-Onlaghi, Alireza Sadeghi, Morad Karimpour, Mihriban Pekguleryuz
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 812, No 1, 2021
20. "Design and manufacture of a micro-tensile testing machine for in situ optical observation and DIC analysis: application to 3D-printed and compression-molded ABS"
    Snia Nazari-Onlaghi, Alireza Sadeghi, Morad Karimpour
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, Vol. 1, No 1, 2021
21. "Numerical study of patient-specific ankle-foot orthoses for drop foot patients using shape memory alloy"
    Farshid Sadeghian, Mohammad Reza Zakerzadeh, Morad Karimpour, Mostafa Baghani
    MEDICAL ENGINEERING & PHYSICS, Vol. 69, pp.123-133, 2019
22. "Mechanical properties and microstructure of WE43 Mg alloy processed by warm ECAP followed by extrusion"
    Ali Torkian, Ghader Faraji, Morad Karimpour
    ARCHIVES OF METALLURGY AND MATERIALS, Vol. 63, No 2, 2019
23. "Study of Composite Fiber Reinforcement of Cracked Thin-Walled Pressure Vessels Utilizing Multi-Scaling Technique Based on Extended Finite Element Method"
    seyed Hadi Mirmohammad, Majid Safarabadifarahani, Morad Karimpour, mohammadreza Mohammad Aliha, Fillipo Berto
    STRENGTH OF MATERIALS, Vol. 50, No 6, pp.925-936, 2018
24. "Investigation of microstructure effect on fretting fatigue crack initiation using crystal plasticity"
    Kaveh Minaii, Gholamhossein Farrahi, Morad Karimpour, Hamid Bahai, Gholamhossein Majzoobi
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, Vol. 42, No 3, pp.640-650, 2018
25. "Compliant orthoses for repositioning of knee joint based on super-elasticity of shape memory alloys"
    Farshid Sadeghian, Mohammad Reza Zakerzadeh, Morad Karimpour, Mostafa Baghani
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 29, No 15, pp.3136-3150, 2018
26. "Optimization of Taylor spatial frame half-pins diameter for bone deformity correction: Application to femur"
    Pooria Chavoshnejad, Moosa Ayati, Aziz Abbasspour, Morad Karimpour, Daniel George, Yves Remond, Alireza Heidary Rouchi, Majid Baniassadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol. 232, No 7, pp.673-681, 2018
27. "Investigating the vibrational behaviour of a rotating two-blade propeller by using a self-tracking method"
    Mohammad Reza Ashoori, Farhad Talebi, Heydar Ghadikolaei, Morad Karimpour
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 1, No 1, 2018
28. "ANALYTICAL INVERSE FOR THE SYMMETRIC CIRCULANT TRIDIAGONAL MATRIX"
    Mostafa Mousavi Janbeh Sarayi, Saman Tavana, Morad Karimpour, Mansour Nikkhaheh Bahrami
    far east journal of applied mathematics, Vol. 99, No 1, pp.1-11, 2018
29. "An Investigation into Different Power Consumption Parameters of Rushton Turbines: A Computational Survey"
    Mohammad Reza Ashoori, Farhad Talebi, Heydar Ghadikolaei, Morad Karimpour
    Transactions of FAMENA, Vol. 41, No 4, pp.35-46, 2018
30. "Deformation behaviour of [001] oriented MgO using combined in-situ nano-indentation and micro-Laue diffraction"
    Ayan Bhowmik, Junyi Lee, T. Ben Britton, Wenjun Liu, Tea-sung Jun, Giorgio Sernicola, Morad Karimpour, Daniel Balint, Finn Giuliani
    ACTA MATERIALIA, Vol. 145, pp.516-531, 2018
31. "Effective thermal and mechanical properties of short carbon fiber/natural rubber composites as a function of mechanical loading"
    Mostafa Mahdavi, Ensieh Yousefi, Majid Baniassadi, Morad Karimpour, Mostafa Baghani
    APPLIED THERMAL ENGINEERING, Vol. 117, pp.8-16, 2017
32. "Elastic Percolation in Nanocomposites with Impenetrable Ellipsoidal Inclusion (Comprehensive Study of Geometry and Interphase Thickness)"
    Ziba Gharehnazifam, Majid Baniassadi, Karen Abrinia, Morad Karimpour, Mostafa Baghani
    International Journal of Applied Mechanics, Vol. 08, No 4, 2016
33. "Aortic dissection simulation models for clinical support: fluid-structure interaction vs. rigid wall models"
    Mona Alimohammadi, Joseph Sherwood, Morad Karimpour, Obiekezie Agu, Stavroula Balabani, Vanessa Diaz-zuccarini
    BIOMEDICAL ENGINEERING ONLINE, Vol. 14, No 1, pp.1-16, 2015
34. "An inverse method for extracting the mechanical properties of the constituent materials of a multilayer from nanoindentation data"
    Morad Karimpour, Daniel Balint, Karolina Rzeipiejewska-malyska, Andrew Szerling, Johan Michler, Jianguo Lin
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 68, No 68, pp.384-390, 2013
35. "Three-dimensional virtual grain structure generation with grain size control"
    Pan Zhang, Morad Karimpour, Daniel Balint, Jianguo Lin
    MECHANICS OF MATERIALS, Vol. 55, No 55, pp.89-101, 2012
36. "Cohesive zone representation and junction partitioning for crystal plasticity analyses"
    Pan Zhan, Morad Karimpour, Daniel Balint, Jianguo Lin
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, Vol. 92, No 8, pp.715-733, 2012
37. "A controlled Poisson Voronoi tessellation for grain and cohesive boundary generation applied to crystal plasticity analysis"
    Pan Zhan, Morad Karimpour, Daniel Balint, Jianguo Lin, Didier Farrugia
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 64, No 64, pp.84-89, 2012
38. "Crystal Plasticity Finite Element Modelling and It's application in Micro-Forming"
    Morad Karimpour, Daniel Balint, Jainguo Lin
    STEEL RESEARCH INTERNATIONAL, Vol. Spec. ed. Metal Forming, pp.9-16, 2012
39. "Effect of 3D-printing and compression molding on anisotropy of ABS micro specimen: A comparative study based on DIC"
    Snia Nazari-Onlaghi, Alireza Sadeghi, Morad Karimpour, هادی محمدی
    Amirkabir Journal of Mechanical Engineering, Vol. 1, No 1, 2021
40. "Design and Simulation of a patient specific ankle orthosis using torsional spring"
    Farshid Sadeghian, Mohammad Reza Zakerzadeh, Morad Karimpour, Mostafa Baghani
    Iranian Journal of Mechanical Engineering,, Vol. 1, No 1, 2020
41. "Biomechanical Analysis of Effect of Inclination Angle on Stress Distribution in the Acetabulum and Acetabularcup after Total Hip Arthroplasty"
    Morad Karimpour, Reza Rahimian
    Mechanical Engineering modares, Vol. 19, No 3, pp.559-567, 2019
42. "Design and Simulation of a knee-ankle-foot orthosis using torsional spring"
    Farshid Sadeghian, Morad Karimpour, Mohammad Reza Zakerzadeh, Mostafa Baghani
    Mechanical Engineering modares, Vol. 17, No 10, pp.185-193, 2017
43. "Fabrication of ultrafine-grained Mg microtubes using a combined severe plastic deformation process for biomedical application"
    Hossein Kazemi, Ghader Faraji, S.. Amani, Morad Karimpour, hossein ghanbari
    Mechanical Engineering modares, Vol. 16, No 12, 2017
44. "Dynamic Behavior Analysis of Atomic Force Microscope Based on Gradient Theory"
    Mohammad Alimohammadi, Aghil Yousefi Koma, Ehsan Maani Miandoab, Morad Karimpour
    Mechanical Engineering modares, Vol. 16, No 9, pp.155-164, 2016
45. "Comparison of Femoral Anteversion Measurement in 2 and 3 Dimensions"
    Pooneh Dehghan, Zahra Saghaei, Farid Abbaszadeh, Morad Karimpour, Soheil Mehdipoor
    مجله جراحی استخوان و مفاصل ایران, Vol. 13, No 1, pp.1-7, 2015
46. "Computer Assisted Planning and Patient Specific Instrument Guide For Osteotomies around the knee"
    Soheil Mehdipoor, Farid Abbaszadeh, Morad Karimpour, Farzam Farahmand, Zahra Saghaie
    مجله جراحی استخوان و مفاصل ایران, Vol. 12, No 3, pp.89-94, 2014

Conference Paper

1. "Impact of Varus Ankle Deformity on Tibiotalar Joint Articular Cartilage: A Finite Element Analysis"
   محدثه رجایی راد, Morad Karimpour, Mohammad Reza Haeri Yazdi
   30th national and 8th international Iranian Conference of Biomedical Engineering, 2023
2. "Effects of Genu Varum Deformity on The Activation Patterns of The Knee Abductor and Adductor Muscles During a Complete Gait Cycle"
   Sina Tabeiy, Morad Karimpour
   Second International Conference on Motion Analysis, 2021
3. "A Study on the Effect of ACL Injury on Knee Kinematics Using a 3D Patient Specific Finite Element Model"
   Elaheh Elyasi, Pierre-yves Rohan, Morad Karimpour, Mohammad Ali Nazari
   24th Annual Meeting of the Iranian Orthopaedic Association, 2016
4. "Investigation on Effects of Overlapping Laser Pulses in Laser Shock Peening with Finite Element Method"
   Hamid Reza Karbalaian, Aghil Yousefi Koma, Morad Karimpour, Seyed Saeid Mohtasebi
   5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials , UFGNSM15, 2015
5. "A Study on the necessity of Osteotomy during ACL reconstructive Surgery"
   Negar Hosseini Ashtiani, Shahrzad Damercheli, Zahra Saghaei, Mina Iravani, Soheil Mehdipoor, Morad Karimpour
   23rd Annual Meeting of the Iranian Orthopaedic Association, 2015
6. "Simulation of Femoroacetabular impingement"
   Morad Karimpour, Pooya Salehi, Raman Vakil, Zahra Saghaei, Farid Abbaszadeh
   23rd Annual Meeting of the Iranian Orthopaedic Association, 2015
7. "Acoustic Emission Analysis of Sliding Friction using Wavelet Transform"
   Fateme Aghighia, Aghil Yousefi Koma, Morad Karimpour, Seyed Saeid Mohtasebi
   2nd International Conference on Electrical, Computer, Mechanical and Mechatronics Engineering (ICE2015), 2015
8. "Numerical analysis of the overlap area in guided wave propagation in bonded Aluminum lap joint plates"
   Samaneh Hosseingholizadeh, Aghil Yousefi Koma, Seyed Saeid Mohtasebi, Morad Karimpour
   The 23rd Annual International Conference on Mechanical Engineering (ISME2015), 2015
9. "Numerical analysis of High Speed Sliding Plates with Dry Friction"
   Fateme Aghighia, Aghil Yousefi Koma, Morad Karimpour, Seyed Saeid Mohtasebi
   The 23rd Annual International Conference on Mechanical Engineering (ISME2015), 2015
10. "A Novel Approach for Simulation of Laser Shock Peening using a Finite Domain"
    Hamid Reza Karbalaian, Aghil Yousefi Koma, Morad Karimpour, Seyed Saeid Mohtasebi, Mohammad Hossein Soorgee
    5th International Conference on Laser Peening & Related Phenomena, 2015
11. "Investigation on Effects of Thickness and Boundary Conditions in Laser Shock Peening by FEM"
    Hamid Reza Karbalaian, Aghil Yousefi Koma, Morad Karimpour, Seyed Saeid Mohtasebi, Mohammad Hossein Soorgee
    5th International Conference on Laser Peening & Related Phenomena, 2015
12. "Experimental Investigation of Energy Absorption and Numerical Modeling of Vertical Compression on Lattice Structures Made of Thermoplastic Polyurethane"
    Mohammad Karimi, Mojtaba Haghighi Yazdi, Morad Karimpour
    The 31st Annual International Conference of the Iranian Association of Mechanical Engineers and the 9th Conference on Thermal Power Plants, 2023
13. "The investigation of the effect of pore size in 3D printed porous titanium implants on osseointegration"
    غزاله مرادخانی, Morad Karimpour, Seyed Mahmoud Taheri
    29th annual meeting of the Iranian orthopedic association, 2021
14. "experimental investigation on crack growth of a Ti-6Al-4v alloy compressor blade in high cycle fatigue"
    Seyyed Ali Ahmadi Borooghani, Aghil Yousefi Koma, Morad Karimpour
    The 25th Annual International Conference on Mechanical Engineering .(ISME2017), 2017
15. "Improvement in mechanical properties of WE43"
    Hossein Kazemi, S.. Amani, Ghader Faraji, Morad Karimpour
    3rd MISC, 2016
16. "The ability of Lamb waves for weld inspection"
    Mostafa Fathian, Aghil Yousefi Koma, Seyed Saeid Mohtasebi, Mohammad Hossain Soorgi, Morad Karimpour
    6th International Conference on Acoustics and Vibration, 2016
17. "weld investigation with Lamb Wave"
    Mostafa Fathian, Aghil Yousefi Koma, Seyed Saeid Mohtasebi, Morad Karimpour
    ISAV 2016, 2016
18. "The effects of geometry and residual stress TIG welding on torsional and bending modes of Lamb waves in cylindrical structures"
    Mostafa Fathian, Aghil Yousefi Koma, Morad Karimpour, Mohammad Hossain Soorgi, Seyed Saeid Mohtasebi
    The 15th international conference of Iranian aerospace society, 2016
19. "The ability of longitudinal and torsional modes of Lamb waves for defect detectiong of pipe welding"
    Mostafa Fathian, Aghil Yousefi Koma, محمد حسین سورگی, Morad Karimpour, Seyed Saeid Mohtasebi
    The Third International Conference on Non-Destructive Testing of Iran, 2016
20. "Investigation on the effects of different loading on stress distribution using laser shock peening"
    Hamid Reza Karbalaian, Aghil Yousefi Koma, Morad Karimpour, Seyed Saeid Mohtasebi, Mahdi Safa, Abed Jafari
    14th International Conference of Iranian Aerospace Society, 2015