menu
Seyed Mehdi Ganjiani

Associate Professor

Update: 2024-12-04

Seyed Mehdi Ganjiani

College of Engineering / Mechanical Engineering

Journal Paper

  1. "Evaluating the ductile failure characteristics of CuZn30 brass under different stress conditions"
    Seyed Mehdi Ganjiani, Sina Ghobadi, Ghader Faraji
    ENGINEERING FAILURE ANALYSIS, Vol. 167, 2024
  2. "Size Effect on the Ductile Fracture of the Aluminium Alloy 2024-T351"
    Frantisek Sebek, Patrik Salvet, Petr Bohac, Roman Adamek, Stanislav Vechet, Tomas Navrat, Josef Zapletal, Seyed Mehdi Ganjiani
    EXPERIMENTAL MECHANICS, Vol. -, 2024
  3. "Presenting a Comprehensive Model to Investigate Phase Trans-formation and Damage Growth in AISI 304 and AISI 321 At Room Temperature"
    Reza Barkhordari, Seyed Mehdi Ganjiani
    Power System Technology, Vol. 48, No 2, pp.1370-1381, 2024
  4. "Elucidating fault-related fold mechanics: a 2D finite element analysis of bending, slip, and buckling mechanisms"
    Anis Khalifeh-Soltani, Seyed Ahmad Alavi, Mohammad Reza Ghassemi, Seyed Mehdi Ganjiani, Reza Derakhshani
    Frontiers in Earth Science, Vol. 11, No 1, 2023
  5. "PARAMETERS CONTROLLING THE GEOMETRY OF DETACHMENT AND FAULT-BEND FOLDS: INSIGHTS FROM 3D FINITE-ELEMENT MODELS APPLIED TO THE AHWAZ ANTICLINE IN THE DEZFUL EMBAYMENT, SW IRAN"
    Anis Khalifeh-Soltani, Mohammad R. Ghassemi, Seyed Ahmad Alavi, Seyed Mehdi Ganjiani
    JOURNAL OF PETROLEUM GEOLOGY, Vol. 46, No 2, pp.157-190, 2023
  6. "Influence of plastic anisotropy and stress state on damage evolution and fracture behavior of aluminum 1100"
    Parmida Abedinimanesh, Faraz Hazinia, Seyed Mehdi Ganjiani
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 45, No 1, 2023
  7. "Numerically and Experimentally Investigation of the Effect of Anisotropy and Stress Triaxiality on the Fracture Strain"
    Parmida Abedinimanesh, Faraz Hazinia, Seyed Mehdi Ganjiani
    Mechanical Engineering Sharif, Vol. 1, No 1, 2022
  8. "A large deformation constitutive model for plastic strain-induced phase transformation of stainless steels at cryogenic temperatures"
    Milad Homayounfard, Seyed Mehdi Ganjiani
    INTERNATIONAL JOURNAL OF PLASTICITY, Vol. 156, No 103344, 2022
  9. "Influence of the angle between tibial and prosthesis mechanical axes on tibial bone remodeling in total knee arthroplasty"
    Hosein Hadizade, Hassan Hadizade, Seyed Mehdi Ganjiani, Morad Karimpous
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol. 1, No 1, 2022
  10. "Geomechanical modeling of simple and high angle breakthrough fault- propagation folds"
    Anis Khalifeh-Soltani, Seyed Ahmad Alavi, Mohammad Reza Ghassemi, Seyed Mehdi Ganjiani
    Tectonics Journal, Vol. 5, No 18, 2022
  11. "Influence of ramp geometry and orientation on fault propagation folding: Insights from the 3D finite element method"
    Anis Khalifeh-Soltani, Seyed Ahmad Alavi, Mohammad R. Ghassemi, Seyed Mehdi Ganjiani
    JOURNAL OF STRUCTURAL GEOLOGY, Vol. 153, 2021
  12. "Geomechanical modelling of fault-propagation folds: Estimating the influence of the internal friction angle and friction coefficient"
    Anis Khalifeh-Soltani, Seyed Ahmad Alavi, Mohammad R. Ghassemi, Seyed Mehdi Ganjiani
    TECTONOPHYSICS, Vol. 815, No 228992, 2021
  13. "Investigation of the effect of the angle between femoral and prosthesis mechanical axes on bone remodeling of femur in total knee arthroplasty"
    Hassan Hadizade, Hosein Hadizade, Seyed Mehdi Ganjiani, Morad Karimpous, Abolfazl Hosseinpour
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol. 1, No 1, 2021
  14. "Development of a ductile failure model sensitive to stress triaxiality and Lode angle"
    Seyed Mehdi Ganjiani, Milad Homayounfard
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 1, No 1, 2021
  15. "A Simplified Model of the Strain-Induced Phase Transformation in Austenitic Stainless Steels for Low Temperature Applications"
    Milad Homayounfard, Seyed Mehdi Ganjiani
    Journal of Stress Analysis, Vol. 5, No 2, pp.63-72, 2021
  16. "Damage development during the strain induced phase transformation of austenitic stainless steels at low temperatures"
    Milad Homayounfard, Seyed Mehdi Ganjiani, Farnaz Sasani
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, Vol. 1, No 1, 2021
  17. "A damage model for predicting ductile fracture with considering the dependency on stress triaxiality and Lode angle"
    Seyed Mehdi Ganjiani
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 84, 2020
  18. "Influence of mechanical parameters and overburden pressure on the mechanical evolution of fault propagation folds: insights from 2D finite-element elastic-plastic models applied to the Ayegan anticline, central Alborz"
    Anis Khalifeh- Soltani, Seyed Ahmad Alavi, Mohammad R. Ghassemi, Seyed Mehdi Ganjiani
    Geopersia, Vol. 1, No 1, 2020
  19. "Numerical and Experimental Analysis of Damage Evolution and Martensitic Transformation in AISI 304 Austenitic Stainless Steel at Cryogenic Temperature"
    سید سعید کاظمی, Milad Homayounfard, Seyed Mehdi Ganjiani, Naser Soltani
    International Journal of Applied Mechanics, Vol. 11, No 2, 2019
  20. "Parameters identification and validation of plastic-damage model of 304 stainless steel by small punch test at ambient temperature"
    Amirreza Lotfolahpour, Naser Soltani, Seyed Mehdi Ganjiani, Davood Baharloei
    ENGINEERING FRACTURE MECHANICS, Vol. 200, No 2018, pp.64-74, 2018
  21. "Numerical Analysis of Growing the Ductile Damage in Structures Reinforced by SMA Using Continuum Damage Mechanics Approach"
    Mostafa Baghani, Seyed Mehdi Ganjiani, Mohammad Rezaei
    International Journal of Applied Mechanics, Vol. 10, No 7, 2018
  22. "A nonlinear damage model of hardening-softening materials"
    Seyed Mehdi Ganjiani
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, Vol. 140, No 1, 2017
  23. "A thermodynamic consistent rate-dependent elastoplastic-damage model"
    Seyed Mehdi Ganjiani
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, pp.1-24, 2016
  24. "Identification of damage parameters and plastic properties of an anisotropic damage model by micro-hardness measurements"
    Seyed Mehdi Ganjiani
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 22, No 8, pp.1089-1108, 2013
  25. "An elastoplastic damage-induced anisotropic constitutive model at finite strains"
    Seyed Mehdi Ganjiani
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 22, No 4, pp.499-529, 2012
  26. "Analysis of Concrete Pressure Vessels in the Framework of Continuum Damage Mechanics"
    Seyed Mehdi Ganjiani
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 21, No 6, pp.843-870, 2011
  27. "Solution of nonlinear fractional differential equations using homotopy analysis method"
    Seyed Mehdi Ganjiani
    APPLIED MATHEMATICAL MODELLING, Vol. 34, No 6, pp.1634-1641, 2010
  28. "Solution of coupled system of nonlinear differential equations using homotopy analysis method"
    Seyed Mehdi Ganjiani
    NONLINEAR DYNAMICS, Vol. 56, pp.159-167, 2008
  29. "Experimental and numerical analysis of the effect of stress triaxiality and lode angle on ductile failure of Ti-6Al-4V alloy"
    جواد غفاری, Seyed Mehdi Ganjiani
    Amirkabir Journal of Mechanical Engineering, Vol. 56, pp.791-810, 2024
  30. "Experimental and Numerical Ductile Damage Evolution and Martensitic Transformation at Ambient Temperature for AISI 304, 316 and 321"
    Reza Barkhordari, Seyed Mehdi Ganjiani
    Journal of Mechanical Engineering University of Tabriz, Vol. 1, No 1, 2023
  31. "A new method for calculating the fracture strain of shear and notched specimens at various temperature and stress triaxialities"
    امیررضا استادی, Seyed Mehdi Ganjiani
    Amirkabir Journal of Mechanical Engineering, Vol. 54, No 8, 2022
  32. "Numerical simulation of elastoplastic behavior and damage evolution of metals at various stress triaxialities"
    Mahdi Ansari ataabadi, Seyed Mehdi Ganjiani, Amin Lalegani
    Amirkabir Journal of Mechanical Engineering, Vol. 1, No 1, 2021
  33. "Geomechanical modelling of fault-propagation fold: insights from the role of density on the geometry, and stress and strain evolution, Ayegan anticline, Central Alborz"
    Anis Khalife-Soltani, Seyed Ahmad Alavi, Mohammad Reza Ghassemi, Seyed Mehdi Ganjiani
    Tectonics Journal, Vol. 3, No 10, pp.27-41, 2021
  34. "Finite Element Modelling of Fatigue Crack Growth in Corroded Pipeline"
    مهدی مرانلو, Seyed Mehdi Ganjiani
    Sharif Journal Civil Engineering, Vol. 1, No 1, 2020
  35. "Numerical analysis of growing the ductile damage in structures reinforced by SMA using continuum damage mechanics approach"
    Mostafa Baghani, Mohammad Rezaei, Seyed Mehdi Ganjiani
    Mechanical Engineering Sharif, Vol. 35-3, No 1, 2019
  36. "Calibration of Combined Model of Damage-Plastic Evolution and Martensitic Transformation for AISI 304 Austenitic Stainless Steel at Cryogenic Temperature"
    سید سعید کاظمی, Milad Homayounfard, Seyed Mehdi Ganjiani, Naser Soltani
    Amirkabir Journal of Mechanical Engineering, Vol. 1, No 1, 2019
  37. "Investigation of damage growth by measuring the chord modulus, microhardness and macrohardness variation in ST37 steel"
    Seyed Mehdi Ganjiani, Arsalan Aazamy, میثم کلهر
    Amirkabir Journal of Mechanical Engineering, Vol. 1, No 1, 2019
  38. "Experimental investigation of fatigue damage development using microhardness and chord modulus variation methods in stainless steel 316L"
    Seyed Mehdi Ganjiani, میثم کلهر, Arsalan Aazamy
    Amirkabir Journal of Mechanical Engineering, Vol. 1, No 1, 2019
  39. "Numerical Analysis of Mechanical Behavior of Semi-Crystalline Polymers Based on Continuum Damage Mechanics"
    Seyed Mehdi Ganjiani, Hadi Mehdipour
    Amirkabir Journal of Mechanical Engineering, Vol. 1, No 1, 2018
  40. "Numerical study of delamination in drilling of Glass/Polyester and investigation of mode 𝚰𝚰 fracture contribution"
    Seyed Mehdi Ganjiani, Hosein Orouji, Majid Safarabadifarahani
    Mechanical Engineering modares, Vol. 17, No 8, pp.173-181, 2017
  41. "Numerical study of delamination in drilling of Glass/Polyester and investigation of mode II fracture contribution"
    Seyed Mehdi Ganjiani
    Mechanical Engineering modares, Vol. 99, No 9, pp.1-11, 2017
  42. "Finite element simulation of high velocity impact on polymer composite plates"
    Majid Safarabadifarahani, Parham Ashkani, Seyed Mehdi Ganjiani
    Journal of Sciences and Technology of Composites, Vol. 2, No 3, pp.1-12, 2016
  43. "A damage model incorporating dynamic plastic yield surface"
    Seyed Mehdi Ganjiani
    Journal of Computational Applied Mechanics, Vol. 47, No 1, pp.11-24, 2016

Conference Paper

  1. "Experimental and Numerical Investigation on Ductile Fracture of Aluminum 1100 at Different Stress States"
    Parmida Abedinimanesh, Faraz Hazinia, Seyed Mehdi Ganjiani
    30th Annual International Conference of the Iranian Association of Mechanical Engineers, 2022
  2. "Experimental and numerical investigation of the effect of stress triaxiality on the fracture behavior of St12 steel"
    Mohammad reza Goodini, Faraz Hazinia, Seyed Mehdi Ganjiani
    30th Annual International Conference of the Iranian Association of Mechanical Engineers, 2022
  3. "Analysis and Evaluation of Damage Growth in 3105 Aluminum Using Loading-Unloading and Digital Image Correlation methods (DIC)"
    محمد ابراهیمی, Faraz Hazinia, Seyed Mehdi Ganjiani
    30th Annual International Conference of the Iranian Association of Mechanical Engineers, 2022
  4. "3D Modelling of fualt propagation fold using finite element method"
    انیس السادات خلیفه سلطانی, سید احمد علوی, محمد رضا قاسمی, Seyed Mehdi Ganjiani
    The 40th National Geosciences Congress, 2022
  5. "Modelling of fualt propagation fold: insights from the role of friction coefficient"
    Anis Khalifeh-Soltani, Seyed Ahmad Alavi, Mohammad R. Ghassemi, Seyed Mehdi Ganjiani
    24th conference of Geological Society of Iran, 2021
  6. "Experimental investigation on the fracture strain of aluminum 1050 at various stress states"
    Faraz Hazinia, Seyed Mehdi Ganjiani
    5th International Conference On Mechanical Engineering, Materials and Metallurgy, 2021
  7. "Analysis of forming limit diagrams based on the bonora's and modified bonora's damage models"
    Amin Lalegani, Seyed Mehdi Ganjiani
    The 29th Annual International Conference of the Iranian Association of Mechanical Engineers and the 8th Conference on Thermal Power Plants, 2021
  8. "Evaluation of Failure Strain and Damage behavior of Notched specimens by using SEM"
    Danial Pasha, Seyed Mehdi Ganjiani
    The 29th Annual International Conference of the Iranian Association of Mechanical Engineers and the 8th Conference on Thermal Power Plants, 2021
  9. "Semi-analytic solution of concrete beam under bending loading in the framework of continuum damage mechanics"
    ابراهیم عباسی, Seyed Mehdi Ganjiani, محمدرضا مدنی پور
    The 29th Annual International Conference of the Iranian Association of Mechanical Engineers and the 8th Conference on Thermal Power Plants, 2021
  10. "Experimental analysis and modeling the plastic behavior of the austenitic stainless steel 304 at cryogenic temperature"
    Milad Homayounfard, Seyed Mehdi Ganjiani, سیامک فرض الهی
    The 29th Annual International Conference of the Iranian Association of Mechanical Engineers and the 8th Conference on Thermal Power Plants, 2021
  11. "Investigation of the effect of the neck angle and gradual changes in mechanical properties of hip implants on reducing bone stress by finite element method"
    [] [], Seyed Mehdi Ganjiani, [] []
    The 29th Annual International Conference of the Iranian Association of Mechanical Engineers and the 8th Conference on Thermal Power Plants, 2021
  12. "Effect of density on the geometry, and stress and strain evolution of fault- propagation fold by numerical modeling using finite element method, Ayegan, Central Alborz"
    انیس السادات خلیفه سلطانی, سید احمد علوی, محمد رضا قاسمی, Seyed Mehdi Ganjiani
    National Conference on Tectonics and Structural Geology of Iran, 2019