menu
Karen Abrinia

Professor

Update: 2024-12-04

Karen Abrinia

College of Engineering / Mechanical Engineering

Journal Paper

  1. "An analytical approach for the design optimization of bearing land in the metal extrusion of shaped sections"
    Amin Seyednosrati, Karen Abrinia
    MECCANICA, Vol. 56, No 3, pp.689-704, 2021
  2. "Analysis of plastic deformation behavior of ultrafine-grained aluminum processed by the newly developed ultrasonic vibration enhanced ECAP: Simulation and experiments"
    سعید باقرزاده , Karen Abrinia, Qingyou Han
    Journal of Manufacturing Processes, Vol. 50, No 50, pp.485-497, 2020
  3. "A new method for bearing design in the metal extrusion of profiled sections"
    Amin Seyyed Nosrati, Karen Abrinia
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 106, pp.1069-1084, 2019
  4. "Preparing a Solid Filament for Use in Additive Manufacturing of Metals"
    Amin Jabbari, Karen Abrinia
    JOM, Vol. 71, No 3, pp.1088-1094, 2018
  5. "Developing thixo-extrusion process for additive manufacturing of metals in semi-solid state"
    Meysam Jabbari, Karen Abrinia
    Journal of Manufacturing Processes, Vol. 35, No 35, pp.664-671, 2018
  6. "Acoustic Manipulation of Bio-Particles at High Frequencies: An Analytical and Simulation Approach"
    Mohammad Mahdi Samandari, Karen Abrinia, Amir Sanati -nezhad
    IEEJ Transactions on Sensors and Micromachines, Vol. 8, No 10, 2017
  7. "A metal additive manufacturing method: semi-solid metal extrusion and deposition"
    Karen Abrinia, Amin Jabbari
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 94, pp.3819-3828, 2017
  8. "Ultrasound induced strain cytoskeleton rearrangement: An experimental and simulation study"
    Mohammad Mahdi Samandari, Karen Abrinia, Manijheh Mokhtari-dizaji, Ali Tamayol
    JOURNAL OF BIOMECHANICS, Vol. 60, No 10, pp.39-47, 2017
  9. "Properties and Mechanism of Al/St Bimetal Tube Bonding Produced by Cold Spin-Bonding (CSB) Process"
    Morteza Samandari, Karen Abrinia, Ali Akbarzadeh, Mohammad Javadi Balakan, Ghader Faraji
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 70, No 10, pp.2673-2682, 2017
  10. "Surface acoustic waves induced micropatterning of cells in gelatin methacryloyl (GelMA) hydrogels"
    Karen Abrinia, Mohammad mahdi Samandari
    BIOFABRICATION, Vol. 9, No 1, 2017
  11. "Determination of processing power and optimum billet radius of modified backward extrusion by upper bound approach"
    Hosseini Seyed Hadi, Karen Abrinia
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. 26, No 8, pp.2170-2178, 2016
  12. "The effect of combining high-intensity ultrasonic vibration with ECAE process on the process parameters and mechanical properties and microstructure of aluminum 1050"
    Saeed Bagherzadeh, Karen Abrinia, Yanfei Liu, Qingyou Han
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 170, pp.1-12, 2016
  13. "Ultrasonic assisted equal channel angular extrusion (UAE) as a novel hybrid method for continuous production of ultra-fine grained metals"
    Saeed Bagherzadeh, Karen Abrinia, Qingyou Han
    MATERIALS LETTERS, Vol. 169, pp.90-94, 2016
  14. "Computation on continuous grain refinement in AA1050 aluminum during repetitive tube expansion and shrinking technique"
    Mahdi Jafarzadeh, Karen Abrinia
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 0(0), No 14644207, 2015
  15. "Effect of Ultrasonic Vibration on Compression Behavior and Microstructural Characteristics of Commercially Pure Aluminum"
    Ehsan Baghalarani, Karen Abrinia
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 24, No 11, pp.4364-4376, 2015
  16. "An upper bound analysis for reshaping thick tubes to polygonal cross-section tubes through multistage roll forming process"
    Ehsan Farahmand, Karen Abrinia
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 100, No 207403, pp.90-98, 2015
  17. "Fabrication of ultra-fine grained aluminium tubes by RTES technique"
    Mahdi Jafarzadeh, Karen Abrinia
    MATERIALS CHARACTERIZATION, Vol. 102, No 10445803, pp.1-8, 2015
  18. "3D profile modelling and accurate representation of the deforming region in the extrusion process of complex sections using equi-potential lines method"
    [] [], Mohammad Kazem Besharati Givi, Karen Abrinia, Hassan Rostami
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 80, pp.209-219, 2015
  19. "Numerical and experimental analyses of repetitive tube expansion and shrinking processed AZ91 magnesium alloy tubes"
    Hedieh Hafezi, Karen Abrinia
    Journal of Mechanical Science and Technology, Vol. 29, No 2, pp.733-738, 2015
  20. "A Hybrid Numerical Method for Modeling the Extrusion Process"
    Karen Abrinia
    Materials Today, Vol. 2, No 10, pp.4748-4757, 2015
  21. "Forming limit diagram of tubular hydroformed parts considering the through-thickness compressive normal stress"
    Ehsan Hashemi, Karen Abrinia, منصور خاکپور , Mohammad Esmaeil Yazdanshenas, Mohamad Jafar Mostashregh
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 230, No 1, pp.332-343, 2014
  22. "An analytical formulation as an alternative to FEM software giving strain and stress distributions for the three-dimensional solution of extrusion problems"
    Karen Abrinia
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 71, pp.653-665, 2013
  23. "A Novel Method for 3D-Die Design in the Extrusion Process Using Equi-Potential Lines"
    Seyed Amin Tabatabaei, Mohammad Kazem Besharati Givi, Karen Abrinia, Peyman Karami, وحید زال, Saeed Mirjavadi
    Key Engineering Materials, Vol. 585, No 585, pp.67-75, 2013
  24. "A new analytical definition of the dead material zone for forward extrusion of shaped sections"
    Karen Abrinia
    MECCANICA, Vol. 49, No 2, pp.295-304, 2013
  25. "The Effect of the Imposed Boundary Rate on the Formability of Strain Rate Sensitive Sheets Using the M-K Method"
    Ramin Hashemi, Amir Ghazanfari, Karen Abrinia, Ahmad Assempour
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 22, No 9, pp.2522-2527, 2013
  26. "Using hardness measurement for dislocation densities determination in FSPed metal in order to evaluation of strain rate effect on the tensile behavior"
    Mohsen Barmouz, Karen Abrinia, جهانگیر خسروی
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 559, No 559, pp.917-919, 2013
  27. "A New Theoretical Method for Analysis the Material Flow Pattern in Forward Extrusion"
    Babak Saghafi, Karen Abrinia
    Advanced Materials Research, Vol. 622-623, pp.452-456, 2012
  28. "An upper-bound analysis for frictionless TCAP process"
    Ghader Faraji, Karen Abrinia, Karen Abrinia, Mahmoud Mousavi Mashhadi, Mahmoud Mousavi Mashhadi, Mohsen Hamedi, Mohsen Hamedi
    ARCHIVE OF APPLIED MECHANICS, Vol. 83, No 83, 2012
  29. "Analysis of Bonding Behavior and Critical Reduction of Two-Layer Strips in Clad Cold Rolling Process"
    H. Maleki, Saeed Bagherzadeh, Bizhan Mollaei-dariani, Karen Abrinia
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 22, No 4, pp.917-925, 2012
  30. "A universal formulation for the extrusion of sections with no axis of symmetry"
    Karen Abrinia, Hosein Davarzani
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 212, No 6, pp.1355-1366, 2012
  31. "Parallel tubular channel angular pressing ( PTCAP ) as a new severe plastic deformation method for cylindrical tubes"
    Ghader Faraji , Alireza Babaei , Mahmoud Mosavi Mashhadi , Karen Abrinia
    MATERIALS LETTERS, Vol. 77, pp.82-85, 2012
  32. "Forming Limit Diagrams of Ground St14 Steel Sheets with Different Thicknesses"
    Ramin Hashemi, Amir Ghazanfari, Karen Abrinia, احمد عاصم پور
    SAE International Journal of Materials and Manufacturing, Vol. 5, No 1, pp.60-64, 2012
  33. "A numerical solution for the coupled dynamic thermoelasticity of axisymmetric thin conical shells"
    Naser Soltani, Karen Abrinia, پدرام قادری, بهزاد حکیم الهی
    MATHEMATICAL AND COMPUTER MODELLING, Vol. 55, pp.608-621, 2012
  34. "A numerical solution for the coupled dynamic thermoelasticity of axisymetric thin conical shells"
    Naser Soltani , Karen Abrinia, Peyman Ghaderi , Behzad Hakimelahi
    MATHEMATICAL AND COMPUTER MODELLING, Vol. 55, pp.608-621, 2012
  35. "Theoretical and Experimental Analyses for the Forward Extrusion of Nonsymmetric Sections"
    Karen Abrinia, Mehdi Ghorbani
    MATERIALS AND MANUFACTURING PROCESSES, Vol. 27, No 4, pp.420-429, 2012
  36. "Effects of SiC Particle Size and Process Parameters on the Microstructure and Hardness of AZ91/SiC Composite Layer Fabricated by FSP"
    Parviz Asadi , Mohammad Kazem Besharati Givi, Karen Abrinia, Mehdi Taherishargh , Rasul Salekrostam
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 20, No 9, 2011
  37. "An Analytical Approach to Ring Rolling Using Modified Slab Analysis,"
    Ali Parvizi, Karen Abrinia, Mohsen Hamedi
    Advanced Materials Research, Vol. Manufacturing Process Planning and Scheduling, pp.4634-4641, 2011
  38. "An Upper Bound Analysis of the Ring Rolling Process"
    Ali Parvizi, Karen Abrinia
    Advanced Materials Research, Vol. 383-390, pp.2819-2826, 2011
  39. "direct extrusion of circular profiles with surface composite produced by friction stir processing"
    Arash Aghagol , Saeed Mahmoodi Darani , Karen Abrinia, Mohammad Kazem Besharati Givi
    Advanced Materials Research, Vol. 383/390, pp.2747-2752, 2011
  40. "Life - cycle assessment of a Solar Assist Plug - in Hybrid electric Tractor ( SAPHT in comparison with a conventional tractor"
    Hossen Mousazadeh Mousazade, Alireza Keyhani, Arzhang Javadi , Hossein Mobli, Karen Abrinia, Ahmad Sharifi
    ENERGY CONVERSION AND MANAGEMENT, Vol. 52, No 3, pp.1700-1710, 2011
  41. "Evaluation of alternative battery technologies for solar assist plug - in hybrid electric tractor"
    Hossein Mousazadeh , Alireza Keyhani, Arzhang Javadi , Hossein Mobli, Karen Abrinia, Ahmad Sharifi
    TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT, Vol. 15, No 8, pp.507-512, 2010
  42. "A novel semi - inverse solution method for elastoplastic torsion of heat treated rods"
    Majid Baniassadi , Akbar Ghazavizadeh , Rouhollah Rahmani , Karen Abrinia
    MECCANICA, Vol. 45, No 3, pp.375-392, 2010
  43. "OPTIMAL POWER AND ENERGY MODELING AND RANGE EVALUATION OF A SOLAR ASSIST PLUG - IN HYBRID ELECTRIC TRACTOR ( SAPHT )"
    Hossen Mousazadeh , Alireza Keyhani, Karen Abrinia, Hossein Mobli, A Keyhani , A Javadi
    Transactions of the ASABE, Vol. 53, No 4, pp.1025-1035, 2010
  44. "Investigation of Single Pass Shape Rolling Using an Upper Bound Method"
    Ali Reza Fazlirad , Karen Abrinia
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 19, pp.541-552, 2010
  45. "An approximate load estimation method fo rthree dimensional metal forming problems"
    Karen Abrinia, Rahim Tahriri Mossuleh
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 51, pp.774-781, 2009
  46. "A review of principle and sun - tracking methods for maximizing solar systems output"
    Hossen Mousazadeh Mousazade, Alireza Keyhani, Arzhang Javadi , Hossein Mobli, Karen Abrinia, Ahmad Sharifi
    RENEWABLE & SUSTAINABLE ENERGY REVIEWS, Vol. 13, No 8, pp.1800-1818, 2009
  47. "An analytical solution for the spread extrusion of shaped sections"
    Karen Abrinia, Meysam Makaremi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 41, pp.670-676, 2009
  48. "A methodology for prediction of forming limit stress diagrams considering the strain path effect"
    Ahmad Assempour , Ramin Hashemi , Karen Abrinia, M Ganjiani , E Masoumi
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 45, No 2, pp.195-204, 2009
  49. "Construction and Evaluation of modern EVs drive system"
    Hossein Mousazadeh , Alireza Keyhani, Arzhang Javadi , Hossein Mobli, Karen Abrinia, Ahmad Sharifi
    WSEAS Transactions on Systems, Vol. 4, No 7, 2009
  50. "New Analysis for the FGM thick cylinders under combined pressure and temperature loading"
    Karen Abrinia, Mohammad Hasan Naei, Faramarz Sadeghi , Faramarz Javanroodi
    AMERICAN JOURNAL OF APPLIED SCIENCES, Vol. 5, No 7, pp.852-859, 2008
  51. "Analysis of the Parameters Affecting Warping in Radial Forging Process"
    Faramarz Djavanroodi , Mohamad Sabeghi , Karen Abrinia
    AMERICAN JOURNAL OF APPLIED SCIENCES, Vol. 5, No 8, pp.1013-1018, 2007
  52. "Production of Bilayer Al/St Tubes by Cold Spin Bonding and Investigation of Different Parameters on Bonding Strength of Layers"
    Mohammad Mahdi Samandari, Karen Abrinia, Abbas Akbarzadeh
    Mechanical Engineering modares, Vol. 14, No 15, pp.111-118, 2014
  53. "Design and simulation of photovoltaic arrays of a hybrid electric tractor with solar panels using MATLAB"
    Hossen Mousazadeh Mousazade, Alireza Keyhani, ارژنگ جوادی, Hossein Mobli, Karen Abrinia, Ahmad Sharifi
    The Journal of Environmental Science and Technology, Vol. 14, No 2, pp.13-25, 2012
  54. "Design and simulation of Solar Assist plug-in Hybrid electric tractor using MATLAB"
    Hossen Mousazadeh Mousazade, علیرضا کیهانی , ارژنگ جوادی , Hossein Mobli, Karen Abrinia, Ahmad Sharifi Malvajerdi
    The Journal of Environmental Science and Technology, Vol. 14, No 2, pp.25-13, 2012
  55. "tractor"
    Hossen Mousazadeh Mousazade, Alireza Keyhani, ارژنگ جوادی , Hossein Mobli, Karen Abrinia, Ahmad Sharifi
    Journal of Agricultural Engineering, Vol. 12, No 3, 2011
  56. "بررسی منطقه تغییر شکل فرآیند ECAE توسط تیوری حدبالا"
    سیدمحمدجواد میرنیا , Karen Abrinia, Abbas Rastgo Ghamsari
    International Journal Of Advanced Design And Manufacturing Technology, Vol. 2, No 3, pp.1-8, 2009
  57. "شبیه سازی سه بعدی فراینداکستروژن مستقیم خارج از مرکز با روش اجزاء محدود و مقایسه با نتایج تجربی"
    جلال پورحسینی باب الدشتی , Karen Abrinia
    University, Vol. 41, No 6, pp.369-377, 2007
  58. "SID.ir"
    مجید بنی اسدی , Karen Abrinia, Mohammad Hasan Naei
    Aerospace Mechanics Journal, Vol. 3, No 1, pp.1-16, 2007
  59. "شبیه سازی اکستروژن معکوس قطعات توخالی دایره ای با شکل خارجی چند ضلعی"
    Karen Abrinia, سکینه اورنگی
    University, Vol. 40, No 6, pp.771-780, 2006
  60. "طراحی قالب آهنگری پیشفرم با روش تغییر شکل معکوس اجزاء محدود"
    Karen Abrinia, Mohammad Hasan Naei, یاسر تقی پور لاهیجانی
    University, Vol. 40, No 6, pp.763-769, 2006
  61. "بررسی مسائل اکستروژن معکوس برای تولید قطعات با شکل داخلی دلخواه از بیلت های دایره ای"
    Karen Abrinia, فرهاد روزگاری
    University, Vol. 39, No 6, pp.701-711, 2006
  62. "تحلیل اثر اصطکاک در فرآیند خمکاری کششی جرخان"
    حمید حصنی , Abolfazl Masoumi, Karen Abrinia
    مجله فنی و مهندسی دانشگاه مازندران, Vol. 3, No 3, pp.1-10, 2006
  63. "تحلیل اثراصطکاک در فرایند خمکاری کششی چرخان"
    حمید حصنی , Abolfazl Masoumi, Karen Abrinia
    مجله فنی مهندسی, Vol. 3, No 3, 2005
  64. "شبیه سازی و تحلیل کشش عمیق TWB"
    Abolfazl Masoumi, Karen Abrinia, مسعود تائبی
    University, Vol. 39, No 1, pp.73-82, 2005
  65. "تحلیل فرایند آهنگری به کمک روش حد بالای اجزایی"
    Karen Abrinia, طاهر زمانی
    University, Vol. 37, No 3, 2003
  66. "تحلیل فرایند آهنگری کله زنی قطعات دارای محور تقارن با استفاده از روش حد بالا"
    اشکان هماوندی , Karen Abrinia
    University, Vol. 35, No 4, pp.523-533, 2002

Conference Paper

  1. "Design simulation and construction of twosynchronized DC motors driver for EVs"
    Hossen Mousazadeh Mousazade, Alireza Keyhani, ارژنگ جوادی, Hossein Mobli, Karen Abrinia, Ahmad Sharifi
    WASET-2009, 2009
  2. "Dynamic Modeling of the energy flow in the hybrid solar cars"
    صابر تقواییان, Behzad Asai, Karen Abrinia
    1st International Conference on Electronic Industry in Automobiles, 2008
  3. "An Analytical Solution for the FGM Thick Cylinders under Pressure and Temperature Loading"
    Karen Abrinia, فرزاد صادقی, Mohammad Hasan Naei, حسین عباس زاده
    TICME2007, 2007
  4. "A new method for finding initial extension of plastic region for elastoplastic torsion of variable yield sections without strain hardening"
    Mohammad Hasan Naei, مجید بنی اسدی, Karen Abrinia, اکبر قضاوی زاده
    ICMEM2007, 2007