Journal Paper

1. "Empirical evaluation of refrigerant flow boiling within metal foams based on entropy generation analysis"
   Rasool Mohamadi, Behrang Sajadi, Mohammadali Akhavanbehabadi
   INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 206, 2024
2. "Effect of using gradient metal foam inserts on heat transfer and pressure drop during R134a flow boiling: An empirical investigation"
   Rasool Mohamadi, Mohammadali Akhavanbehabadi, Behrang Sajadi, Ali Nosrati
   INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, Vol. 109, 2024
3. "Effects of adding micro/nano-scale surface roughness on upward flow boiling of R-134a through annular tubes"
   Nima HASAN GANJEH, Ali Nosrati, Pouria Ahmadi, Mehdi Ashjaee, Seyed Farshid Chini, Behrang Sajadi, ALIREZA GOLAMI, Mohammadali Akhavanbehabadi
   APPLIED THERMAL ENGINEERING, Vol. 255, 2024
4. "4E analysis and tri-objective optimization of a novel solar 4th cogeneration system for a smart residential building in various climates of Iran"
   Babak Saadmohammadi, Behrang Sajadi
   ENERGY CONVERSION AND MANAGEMENT, Vol. 303, No 118177, 2024
5. "The effect of using smart shadings on the thermal and visual performances of buildings in Iran: A numerical simulation"
   Seyedeh fatemeh Mirala, Behrang Sajadi, Mohammadali Akhavanbehabadi, Ehsan Naderi
   Energy Equipment and Systems, Vol. 11, No 4, 2023
6. "Effect of surface engineering methods on refrigerant evaporating flow characteristics in annular tubes: Experimental approach"
   A R Gholami, Mohammadali Akhavanbehabadi, Seyed Farshid Chini, Behrang Sajadi, R F Kunz, M M Ahmadpour
   Thermal Science and Engineering Progress, Vol. 46, No 1, 2023
7. "Designing energy-efficient and visually-thermally comfortable shading systems for office buildings in a cooling-dominant climate"
   Sarah Nazari, Payam Keshavarz Mirzamohammadi, Behrang Sajadi, Peiman Pilehchi Ha, Siamak Talatahri, Pooya Sareh
   Energy Reports, Vol. 10, pp.3863-3881, 2023
8. "Refrigeration components sizing tool for design of domestic refrigerators (ReSiCo): Demonstration in full scale"
   Parsa Faghih, Ali Salehi, Alireza Jalali, Behrang Sajadi, Mehdi Ashjaee, Ehsan Hoshfar
   Case Studies in Thermal Engineering, Vol. 49, 2023
9. "Prediction of heat transfer coefficient and pressure drop of R1234yf and R134a flow condensation in horizontal and inclined tubes using machine learning techniques"
   Shaghayegh Tarabkhah, Behrang Sajadi, Mohammadali Akhavanbehabadi
   INTERNATIONAL JOURNAL OF REFRIGERATION, Vol. 152, pp.256-268, 2023
10. "Energy performance sensitivity analysis on building's passive technologies effective parameters, in an NZEB EnergyPlus-simulated villa in Tehran's weather conditions with OFAT methods"
    Amir Varzandeh, Behrang Sajadi
    Energy Equipment and Systems, Vol. 11, No 2, pp.213-229, 2023
11. "The effect of the mucus layer and the inhaled air conditions on the droplets fate in the human nasal cavity: A numerical study"
    Yashar Aghaei, Behrang Sajadi, Goodarz Ahmadi
    JOURNAL OF AEROSOL SCIENCE, Vol. 171, 2023
12. "Effect of hydrophilic and hydrophobic metal foams on condensation characteristics of refrigerant flow inside annular tubes: Experimental study"
    SANAAN AHMADI, Mohammadali Akhavanbehabadi, Behrang Sajadi, M.M. Ahmadpour
    Thermal Science and Engineering Progress, Vol. 40, 2023
13. "Parametric study of skylight design parameters to improve the indoor visual quality in exhibition areas"
    Fatemeh Jahani, Behrang Sajadi
    Energy Equipment and Systems, Vol. 11, No 1, pp.1-11, 2023
14. "Optimisation of commercial buildings envelope to reduce energy consumption and improve indoor environmental quality (IEQ) using NSGA-II algorithm"
    Sarah Nazari, Behrang Sajadi, Iman Sheikhansari
    International Journal of Ambient Energy, Vol. -, pp.1-11, 2023
15. "Evaluating the time lag and decrement factor of mortar and concrete containing OPBC as an agricultural by-product lightweight aggregate"
    Iman Asadi, Mohammad Hashemi, Behrang Sajadi, Norhayati Binti Mahyuddin, Mohammad Hajmohammadian Baghban, Masoud Esfandiari, Mehdi Maghfouri, Kezhen Yan
    Case Studies in Thermal Engineering, Vol. 41, 2023
16. "Phase change materials incorporated into geopolymer concrete for enhancing energy efficiency and sustainability of buildings: A review"
    Iman Asadi, Mohammad Hajmohammadian Baghban, Mohammad Hashemi, Nima Izadyar, Behrang Sajadi
    Case Studies in Construction Materials, Vol. 17, 2022
17. "Numerical modeling of particles resuspension due to human stepping"
    Behrang Sajadi, Mohammad Hassan Saidi, Goodarz Ahmadi, Mohsen Soleimani
    Energy Equipment and Systems, Vol. 10, No 4, pp.401-415, 2022
18. "Experimental study on the effects of using metal foam on R-134a flow boiling in annular tubes"
    Ali Nosrati, Mohammadali Akhavanbehabadi, Behrang Sajadi, Pooyan Razi, رسول محمدی
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 177, 2022
19. "An empirical investigation on flow pattern, heat transfer, and pressure drop during flow boiling of R1234yf in an inclined plain tube"
    Meisam Isakhani Zakaria, Mohammadali Akhavanbehabadi, Behrang Sajadi, Mohammad Tohidi Moghadam
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 170, 2021
20. "Two-phase R1234yf flow inside horizontal smooth circular tubes: Heat transfer, pressure drop, and flow pattern"
    Hamidreza Fazelnia, Soorena Azarhazin, Behrang Sajadi, Mohammadali Akhavanbehabadi, Sajjad Zakeralhoseini, MohamadVahid RafieiNejad
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, Vol. 140, 2021
21. "Heat Transfer and Pressure Drop of R1234yf Boiling in Helically Coiled Tubes"
    Behrang Sajadi, Javad Naserinejad, Mohammadali Akhavanbehabadi, پویان رازی , Mohsen Soleimani
    HEAT TRANSFER ENGINEERING, Vol. -, pp.1-14, 2021
22. "Simulation-based optimization of smart windows performance using coupled EnergyPlus - NSGA-II - ANP method Authors"
    Behrang Sajadi, Maryam Mirnaghi, Mohammadali Akhavanbehabadi, Navid Delgarm, [] []
    Energy Equipment and Systems, Vol. 9, No 1, pp.1-12, 2021
23. "Numerical investigation of the solar activated carbon/methanol adsorption refrigeration system in Tehran’s climate"
    Roozbeh Yousefnejad, Behrang Sajadi, Mohammad Ahadinejad
    Energy Equipment and Systems, Vol. 8, No 4, pp.339-348, 2020
24. "The effect of nasal airway obstruction on the dispersion and deposition of inhaled volatile droplets in the human nasal cavity: A numerical study"
    Ramin Tohidi, Behrang Sajadi, Goodarz Ahmadi
    JOURNAL OF AEROSOL SCIENCE, Vol. 150, 2020
25. "Optimization of the renewable energy system for nearly zero energy buildings: A future-oriented approach"
    Hamed Sobhani, Faeze Shahmoradi, Behrang Sajadi
    ENERGY CONVERSION AND MANAGEMENT, Vol. 224, 2020
26. "Simulation-based performance analysis of residential direct evaporative coolers in four climate regions of Iran"
    Ehsan Naderi, Behrang Sajadi, Erfan Naderi, Babak Bakhti
    JOURNAL OF BUILDING ENGINEERING, Vol. 32, 2020
27. "Experimental investigation of the heat transfer coefficient and pressure drop of R1234yf during flow condensation in helically coiled tubes"
    Sajjad Zakeralhoseini, Behrang Sajadi, Mohammadali Akhavanbehabadi, Soorena Azarhazin, Hamidreza Fazelnia
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 157, 2020
28. "Experimental study of heat transfer coefficient, pressure drop and flow pattern of R1234yf condensing flow in inclined plain tubes"
    Mohammad Tohidi Moghadam, Mohammadali Akhavanbehabadi, Behrang Sajadi, پویان رازی , Meisam Isakhani Zakaria
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 160, 2020
29. "Numerical simulation of ellipsoidal particles deposition in the human nasal cavity under cyclic inspiratory flow"
    Amir R. Esmaeili, Behrang Sajadi, Masoud Akbarzadeh
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 42, No 5, 2020
30. "Experimental Study of Lubricating Oil Effect on R600a Condensation inside Micro-Fin Tubes"
    M.M. Ahmadpour, Mohammadali Akhavanbehabadi, Behrang Sajadi, Alireza Salehi Kohestani
    HEAT TRANSFER ENGINEERING, Vol. -, pp.1-13, 2020
31. "Multi-objective simulation-based optimization of controlled blind specifications to reduce energy consumption, and thermal and visual discomfort: Case studies in Iran"
    Ehsan Naderi, Behrang Sajadi, Mohammadali Akhavanbehabadi, Erfan Naderi
    BUILDING AND ENVIRONMENT, Vol. 169, 2020
32. "Boiling heat transfer coefficient and pressure drop of R1234yf flow inside smooth flattened tubes: An experimental study"
    Soorena Azarhazin, Behrang Sajadi, Hamidreza Fazelnia, Mohammadali Akhavanbehabadi, Sajjad Zakeralhoseini
    APPLIED THERMAL ENGINEERING, Vol. 165, 2020
33. "The effect of twisted tape inserts on heat transfer and pressure drop of R1234yf condensation flow: An experimental study"
    Behrang Sajadi, Mehdi Soleymani, Mohammadali Akhavanbehabadi, EHSAN HADADI
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 146, 2020
34. "Effect of lubricating oil on condensation characteristics of R600a inside a horizontal U-shaped tube: Experimental study"
    M.M. Ahmadpour, Mohammadali Akhavanbehabadi, Behrang Sajadi, Alireza Salehi Kohestani
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, Vol. 145, 2019
35. "Experimental study of the heat transfer coefficient and pressure drop of R1234yf condensing flow in flattened smooth tubes"
    Hamidreza Fazelnia, Behrang Sajadi, Soorena Azarhazin, Mohammadali Akhavanbehabadi, Sajjad Zakeralhoseini
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, Vol. 106, pp.120-132, 2019
36. "Experimental study of R600a/oil/MWCNT nano-refrigerant condensing flow inside micro-fin tubes"
    M.M. Ahmadpour, Mohammadali Akhavanbehabadi, Behrang Sajadi, Alireza Salehi Kohestani
    HEAT AND MASS TRANSFER, Vol. 56, pp.749-757, 2019
37. "Toward the design of zero energy buildings (ZEB) in Iran: Climatic study"
    Shayan Keyvanmajd, Behrang Sajadi
    Energy Equipment and Systems, Vol. 7, No 2, pp.111-119, 2019
38. "The effect of wire-coil inserts on the heat transfer and pressure drop of R1234yf flow boiling"
    Behrang Sajadi, Milad Najafizadeh, Mohsen Soleimani, Mohammadali Akhavanbehabadi, Javad Naserinejad
    APPLIED THERMAL ENGINEERING, Vol. 152, pp.615-623, 2019
39. "Computational modeling of the operating room ventilation performance in connection with surgical site infection"
    Mohammad Hassan Saidi, Behrang Sajadi, Goodarz Ahmadi
    Scientia Iranica, 2018
40. "Numerical evaluation of the operating room ventilation performance: ultra-clean ventilation (UCV) systems"
    Behrang Sajadi, Mohammad Hassan Saidi, Goodarz Ahmadi
    Scientia Iranica, 2018
41. "A numerical study of electric force effects on detachment and deposition of particles due to a falling disk"
    Davoud Malekian, Behrang Sajadi, Goodarz Ahmadi, Milad Pirhadi
    JOURNAL OF AEROSOL SCIENCE, Vol. 124, pp.133-145, 2018
42. "On the convection heat transfer and pressure drop of copper oxide-heat transfer oil Nanofluid in inclined microfin pipe"
    Farhad Hekmatipour, Milad Jalali, Farzad Hekmatipour, Mohammadali Akhavanbehabadi, Behrang Sajadi
    HEAT AND MASS TRANSFER, Vol. 55, No 2, pp.433-444, 2018
43. "Evaluation of thermal comfort, IAQ and energy consumption in an impinging jet ventilation (IJV) system with/without ceiling exhaust"
    Samira Haghshenaskashani, Behrang Sajadi
    JOURNAL OF BUILDING ENGINEERING, Vol. 18, pp.142-153, 2018
44. "Multi-objective optimization of impinging jet ventilation systems: Taguchi-based CFD method"
    Samira Haghshenaskashani, Behrang Sajadi, Mathias Cehlin
    Building Simulation, Vol. -, 2018
45. "Phase change and deposition of inhaled droplets in the human nasal cavity under cyclic inspiratory airflow"
    Milad Pirhadi, Behrang Sajadi, Goodarz Ahmadi, Davoud Malekian
    JOURNAL OF AEROSOL SCIENCE, Vol. 118, pp.64-81, 2018
46. "Sensitivity analysis of building energy performance: A simulation-based approach using OFAT and variance-based sensitivity analysis methods"
    Navid Delgarm, Behrang Sajadi, Khadijeh Azarbad, Saeed Delgarm
    JOURNAL OF BUILDING ENGINEERING, Vol. 15, pp.118-193, 2017
47. "A comprehensive study on the effect of hot water demand and PCM integration on the performance of SDHW system"
    Mehrdad Torabi, Nima Mirkhani, Behrang Sajadi
    SOLAR ENERGY, Vol. 159, pp.405-414, 2017
48. "Mixed convection heat transfer and pressure drop characteristics of the copper oxide-heat transfer oil (CuO-HTO) nanofluid in vertical tube"
    Farhad Hekmatipour, Mohammadali Akhavanbehabadi, Behrang Sajadi, Mohammad Fakoor Pakdaman
    Case Studies in Thermal Engineering, Vol. 10, pp.532-540, 2017
49. "Multi-objective optimization of building energy performance and indoor thermal comfort: A new method using artificial bee colony(ABC)"
    Navid Delgarm, Behrang Sajadi, Saeed Delgarm
    ENERGY AND BUILDINGS, Vol. -, No 131, pp.42-53, 2017
50. "A novel approach for the simulation-based optimization of the buildings energy consumption using NSGA-II: Case study in Iran"
    Navid Delgarm, Behrang Sajadi, Saeed Delgarm, Farshad Kousari
    ENERGY AND BUILDINGS, Vol. -, No 127, pp.552-560, 2017
51. "Geothermal sea water desalination system (GSWDS) using abandoned oil/gas wells"
    Younes Noorollahi, Salman Taghipoor, Behrang Sajadi
    GEOTHERMICS, Vol. -, No 67, pp.66-75, 2017
52. "Optimization of the PCM-integrated solar domestic hot water system under different thermal stratification conditions"
    Mehrdad Shirinbakhsh, Seyed Nima Mirkhani, Behrang Sajadi
    Energy Equipment and Systems, Vol. 4, No 2, pp.271-279, 2016
53. "The effect of hemispherical chevrons angle, depth, and pitch on the convective heat transfer coefficient and pressure drop in compact plate heat exchangers"
    Behrang Sajadi, Pedram Hanafizadeh, Samar Bahman, Ghazaleh Hayati
    Energy Equipment and Systems, Vol. 4, No 1, pp.31-41, 2016
54. "An empirical study on the mixed convection transfer and pressure drop of HTO/ CuO nanofluid in inclined tubes"
    Mohammadali Akhavanbehabadi, Farhad Hekmatipour, Behrang Sajadi
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol. -, 2016
55. "Multi-objective optimization of the building energy performance: A simulation-based approach by means of particle swarm optimization (PSO)"
    Navid Delgarm, Behrang Sajadi, Farshad Kousari, Saeed Delgarm
    APPLIED ENERGY, Vol. 170, pp.293-303, 2016
56. "Combined free and forced convection heat transfer of the copper oxide-heat transfer oil (CuO-HTO) nanofluid inside horizontal tubes under constant wall temperature"
    Farhad Hekmatipour, Mohammadali Akhavanbehabadi, Behrang Sajadi
    APPLIED THERMAL ENGINEERING, Vol. 100, pp.621-627, 2016
57. "Economic optimization of PCM and insulation layer thickness in residential buildings"
    Amir Baniassadi, Behrang Sajadi, Majid Amidpour, Navid Noori
    SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, Vol. 14, pp.92-99, 2016
58. "On the effect of using phase change materials in energy consumption and CO2 emission in buildings in Iran: a climatic and parametric study"
    Behrang Sajadi, Amir Baniassadi
    Energy Equipment and Systems, Vol. 3, No 2, pp.73-81, 2015
59. "Experimental investigation of thermal–rheological properties and heat transfer behavior of the heat transfer oil–copper oxide (HTO–CuO) nanofluid in smooth tubes"
    Mohammadali Akhavanbehabadi, Farhad Hekmatipour, Seyed Mehdi Mirhabibi, Behrang Sajadi
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, Vol. 68, pp.681-688, 2015
60. "Heat Transfer and Pressure Drop Characteristics of MWCNT/Heat Transfer Oil Nanofluid Flow inside Corrugated Tubes"
    Mohammadali Akhavanbehabadi, M . Karami, Behrang Sajadi
    International Journal of Mining, Metallurgy and Mechanical Engineering (IJMMME), Vol. 3, No 1, pp.49-54, 2015
61. "An empirical study on heat transfer and pressure drop properties of heat transfer oil-copper oxide nanofluid in microfin tubes"
    Mohammadali Akhavanbehabadi, Farhad Hekmatipour, S.m. Mirhabibi, Behrang Sajadi
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, Vol. 57, pp.150-156, 2014
62. "On the Induced Airflow and Particle Resuspension Due to a Falling Disk"
    Behrang Sajadi, Mohammd Hassan Saidi, Goodarz Ahmadi
    PARTICULATE SCIENCE AND TECHNOLOGY, Vol. 2, No 31, pp.190-198, 2013
63. "Pumping effect of bubble growth and collapse in microchannels: Thermo-hydraulic modeling"
    Behrang Sajadi, Mohammad Hassan Saidi
    Scientia Iranica, Vol. 19, No 3, pp.431-436, 2012
64. "Innovative Semi-Analytical Methodology to Predict Automobile Body Temperature Distribution in the Curing Ovens"
    Pedram Hanafizadeh, Behrang Sajadi, Mohammad Hasan Saidi
    HEAT TRANSFER ENGINEERING, Vol. 33, No 2, pp.109-117, 2012
65. "Thermodynamic modeling and investigation of the refrigerant type on the performance of VRF refrigeration systems"
    Behrang Sajadi, Reza Dalili, Mohammadali Akhavanbehabadi
    Mechanical Engineering Sharif, Vol. 3-32, No 2, pp.125-132, 2016

Conference Paper

1. "An investigation on convective boiling heat transfer of R1234yf inside alternating flattened tubes"
   AmirHosein Haghighat, Mohammadali Akhavanbehabadi, Behrang Sajadi, Rasool Mohamadi
   The 31th Annual International Conference of Iranian Society of Mechanical Engineers & 9th Conference on Thermal Power Plants, 2023
2. "An empirical study on the effect of metal foam inserts on the pressure drop of R134a flow boiling in horizontal tubes"
   Rasool Mohamadi, Mohammadali Akhavanbehabadi, Behrang Sajadi
   The 31th Annual International Conference of Iranian Society of Mechanical Engineers & 9th Conference on Thermal Power Plants, 2023
3. "Neural network – genetic algorithm optimization of a hybrid renewable energy system (HRES) for a primary school in a rural area"
   Masoomeh Shahafv, Ali Izadi, Behrang Sajadi, Pouria Ahmadi
   The 30th Annual International Conference of Iranian Society of Mechanical Engineers & 8th Conference on Thermal Power Plants, 2022
4. "Evaluation of the technical performance of a techno-economic-environmental optimized building façade integrated photovoltaic system"
   Hamed Amini, Behrang Sajadi, Pouria Ahmadi
   The 30th Annual International Conference of Iranian Society of Mechanical Engineers & 8th Conference on Thermal Power Plants, 2022
5. "Prediction of the pressure drop of R1234yf boiling flow using machine learning techniques"
   Farzaneh Abolhasani, Behrang Sajadi, Mohammadali Akhavanbehabadi
   The 30th Annual International Conference of Iranian Society of Mechanical Engineers & 8th Conference on Thermal Power Plants, 2022
6. "Inhalation, evaporation and deposition of water droplets at nostrils under cyclic flow"
   Ramin Tohidi, Behrang Sajadi
   28th Annual International Conference of Iranian Society of Mechanical Engineering, 2020
7. "Investigation of the Transparent Insulations Effect on the Thermal and Optical Performance"
   Amir Mohammad Seyedi, Mohamad Abdolmaleki, Behrang Sajadi
   28th Annual International Conference of Iranian Society of Mechanical Engineering, 2020
8. "Multi-Objective Optimization of Smart Windows Specifications Using Coupled EnergyPlus-GA Method"
   Maryam Mirnaghi, Behrang Sajadi
   25th Annual International Conference on Mechanical Engineering, 2017
9. "Multi-Objective Optimization of Building Envelopes Considering Embodied Energy"
   Alireza Goudarzi, Behrang Sajadi, Navid Delgarm, Mohammadali Akhavanbehabadi, Maryam Mirnaghi
   25th Annual International Conference on Mechanical Engineering, 2017
10. "Multi-Objective Optimization of Smart Windows Specifications Using Coupled Energy Plus-GA Mehod"
    Maryam Mirnaghi, Behrang Sajadi, Navid Delgarm, Mohammadali Akhavanbehabadi, Alireza Goudarzi
    25th Annual International Conference on Mechanical Engineering, 2017
11. "Numerical Modeling of Solar Methanol-Activated Carbon Adsorption Refrigeration System"
    Taregh Habibi, Behrang Sajadi
    25th Annual International Conference on Mechanical Engineering, 2017
12. "Mixed Convection Heat Transfer of the Copper Oxide - Heat Transfer Oil Nanofluid in Horizontal Tubes"
    Farhad Hekmatipour, Mohammadali Akhavanbehabadi, Behrang Sajadi
    24th Annual International Conference on Mechanical Engineering (ISME2016), 2016
13. "Mixed natural-forced convection heat transfer of the HTO-CuO nanofluid flow in the inclined tubes"
    Mohammadali Akhavanbehabadi, Farhad Hekmatipour, Behrang Sajadi
    5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15, 2015
14. "Experimental study of the mixed convection heat transfer of HTO-CuO nanofluid flow in vertical tubes"
    Mohammadali Akhavanbehabadi, F. Hekmatipour, S.m. Mirhabibi, Behrang Sajadi
    2nd International Conference on Modern Applications of Nanotechnology, 2015
15. "Heat transfer and pressure drop characteristics of MWCNT/heat transfer oil nanofluid flow inside corrugated tubes"
    M. Karami, Mohammadali Akhavanbehabadi, Behrang Sajadi
    3rd International Conference on Science, Engineering & Technology, 2015
16. "A New Method for Optimizing the Air Circulation System in the Car Paint Booth"
    Alireza Ghasemi, Mohammad Zabetian, Behrang Sajadi, Reza Niroomand, Mohammad Hassan Saidi
    21st International Conference on Mechanical Engineering (ISME2013), 2013
17. "Numerical analysis of the effect of air flowrate of furnaces on the temeperature distribution in greenhouses"
    Rasool Mohamadi, Babak Bakhti, Behrang Sajadi
    The 32th Annual International Conference of Iranian Society of Mechanical Engineers, 2024
18. "Numerical simulation and optimization of the heat transfer coefficient and entropy generation of natural convection between two eccentric cylinders"
    رسول محمدی, هادی پرتوی آریا, Behrang Sajadi, Negin Bagherpour
    The 30th Annual International Conference of Iranian Society of Mechanical Engineers & 8th Conference on Thermal Power Plants, 2022
19. "Heat Transfer and Pressure Drop Coefficients of R1234yf Condensing Flow in Flatten Tubes: An Experimental Study"
    Hamidreza Fazelnia, Mohammadali Akhavanbehabadi, Behrang Sajadi
    The 29th Annual International Conference of Iranian Society of Mechanical Engineers & 8th Conference on Thermal Power Plants, 2021
20. "Sensitivity Analysis of Technical, Economical, and Environmental Functions of BIPV Systems to Design Parameters Using Morris Method"
    Hamed Amini, Behrang Sajadi, Pouria Ahmadi
    The 29th Annual International Conference of Iranian Society of Mechanical Engineers & 8th Conference on Thermal Power Plants, 2021
21. "Flow boiling of R1234yf in Flatten Tubes: Enhancing Effect Evaluation"
    Soorena Azarhazin, Mohammadali Akhavanbehabadi, Behrang Sajadi
    The 29th Annual International Conference of Iranian Society of Mechanical Engineers & 8th Conference on Thermal Power Plants, 2021
22. "Experimental Study of Condensing Heat Transfer of Isobutane-based Nano-refrigerant inside U-tubes"
    M.M. Ahmadpour, Mohammadali Akhavanbehabadi, Behrang Sajadi
    28th Annual International Conference of Mechanical Engineering, 2020
23. "Application of facades integrated with microalgae in reducing energy consumption in the construction industry"
    Mahmoud Mohammad Hosein Zadeh Golabchi, هلیانه سجادی, کریستوفر ووپ, Behrang Sajadi
    6th. National Congress on Civil Engineering, Architecture and Urban Development, 2019
24. "Application of facades combined with microalgae to reduce energy consumption"
    Mahmoud Mohammad Hosein Zadeh Golabchi, هلیانه سجادی, کریستوفر ووپ, Behrang Sajadi
    6th.National Congress on Civil Engineering , Architecture and Urban Development, 2019
25. "Numerical study of static and dynamic thermal properties for common structural details for the outer shell in Iran"
    Mahmoud Mohammad Hosein Zadeh Golabchi, مهدیه عامری, Behrang Sajadi
    6th.National Congress on Civil Engineering , Architecture and Urban Development, 2019
26. "Designing Golab Tunnel Ventilation System During Excavation"
    Reza Rezaei, Hassan Bakhshandeh Amnieh, Behrang Sajadi
    International Conference on Modern Research in Civil Engineering, Architecture, Urban Management and Enviroment, 2018
27. "Numerical study of the effective parameters on the electrostatic precipitators performance"
    Sima Adimi, Behrang Sajadi
    25th Annual International Conference on Mechanical Engineering, 2017
28. "Review of design methods of tunnel ventilation systems focusing on computational fluid dynamics method"
    Reza Rezaei, Hassan Bakhshandeh Amnieh, Behrang Sajadi
    4th International Congress on Civil Engineering , Architecture and Urban Development, 2016
29. "Numerical study on effective length and ventilation airflow of tunnel face using computational fluid dynamics"
    Reza Rezaei, Hassan Bakhshandeh Amnieh, Behrang Sajadi
    4th International Congress on Civil Engineering , Architecture and Urban Development, 2016
30. "Investigation of the effect of the smart glazing on the buildings energy consumption using EnergyPlus"
    Maryam Mirnaghi, Behrang Sajadi, Navid Delgarm, Mohammadali Akhavanbehabadi, Alireza Goodarzi
    2nd International Conference on New Research Achievements in Mechanics, Industrial and Aerospace Engineering, 2016
31. "Simulation of the effect of exterior walls insulation on the building heating load"
    Alireza Goodarzi, Behrang Sajadi, Navid Delgarm, Mohammadali Akhavanbehabadi, Maryam Mirnaghi
    2nd International Conference on New Research Achievements in Mechanics, Industrial and Aerospace Engineering, 2016
32. "Numerical Analysis of The Fouling Effect in Helix Shell and Tube Heat Exchangers"
    Behrang Sajadi, Mohammad Hamed Pourhashemi, Mohammad Reza Jafari Nasr
    7th International Conference on Heating, Ventilation, and Air Conditioning, 2016
33. "Numerical Modeling and Exergy Analysis of Variable Refrigerant Flow (VRF) Systems"
    Reza Dalili, Behrang Sajadi, Mohammadali Akhavanbehabadi
    6th International Conference on Heating, Ventilation and Air Conditioning, 2015
34. "Investigation of using PCM on reduction of building energy consumption: Case study"
    Ali Rabbani, Behrang Sajadi
    23rd Annual International Mechanical Engineering Conference, 2015
35. "On the effect of using PCM in the envelope on reducing building energy consumption: Case study in Tehran"
    Mohammad Yousefipour, Behrang Sajadi, Mohammadali Akhavanbehabadi
    23rd Annual International Mechanical Engineering Conference, 2015
36. "On the effect of using PCM-embedded ventilated facade on reducing building energy consumption: Case study in Tehran"
    Mehdi Shirani, Behrang Sajadi, Hosein Shokouhmand
    23rd Annual International Mechanical Engineering Conference, 2015
37. "Optimization of energy consumption in PCM-embedded solar water heater using Genetic Algorithm"
    Soror Gholami, Behrang Sajadi, Mehrdad Shirinbakhsh, Seyed Nima Mirkhani, Hosein Shokouhmand
    4th International Conference on Emerging Trends in Energy Conversion, 2015
38. "Numerical study of the effect of shadings on reducing building energy consumption: Case study in Tehran"
    Said Shams Alizadeh, Behrang Sajadi, Mohammadali Akhavanbehabadi
    4th International Conference on Emerging Trends in Energy Conversion, 2015
39. "Numerical Investigation of the Effect of Using PCMs on Building Energy Saving"
    Amir Baniasadi, Behrang Sajadi
    22th International Conference on Mechanical Engineering, 2014