Journal Paper

1. "In silico actuation performance investigation of dielectric elastomers with TPMS geometries"
   Mohammad Ali Safaei, Mostafa Baghani, Majid Baniassadi, Mahdi Bodaghi
   EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 111, 2025
2. "A Nonlinear Thermo-Visco-Green-Elastic Constitutive Model for Mullins Damage of Shape Memory Polymers under Giant Elongations"
   Alireza OstadRahimi, Alireza Enferadi, Mostafa Baghani, Siavash Sarrafan, Guoqiang Li
   JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol. 196, 2025
3. "Simultaneous 4D printing and In-Situ foaming for tailoring shape memory behaviors in polylactic acid foams"
   Pedram Honari, Davood Rahmatabadi, Abbas Bayati, Erfan Rassi, Ismaeil Ghasemi, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
   Manufacturing Letters, Vol. 43, pp.33-36, 2025
4. "Unveiling novel structural complexity of spiral carbon nanomaterials: Review on mechanical, thermal, and interfacial behaviors via molecular dynamics"
   Ali Sharifian, Parmida Fareghi, Mostafa Baghani, Gregory M. Odegard, Adri C.T. van Duin, Ali Rajabpour, Jianyang Wu., Majid Baniassadi
   JOURNAL OF MOLECULAR STRUCTURE, Vol. 1321, 2025
5. "3D printed elastomers with superior stretchability and mechanical integrity by parametric optimization of extrusion process using Taguchi Method"
   Abbas Bayati, Mina Ahmadi, Davood Rahmatabadi, Mohammad Khodaei, Hao Xiang, Majid Baniassadi, Karen Abrinia, Ali Zolfagharian, Mahdi Bodaghi, Mostafa Baghani
   Materials Research Express, Vol. 12, No 1, 2025
6. "4D printing and optimization of biocompatible poly lactic acid/poly methyl methacrylate blends for enhanced shape memory and mechanical properties"
   Hossein Doostmohammadi, Kamyab Kashmarizad, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
   Journal of the Mechanical Behavior of Biomedical Materials, Vol. 160, 2024
7. "Numerical and experimental investigation of 3D printed tunable stiffness metamaterial with real-time response using digital light processing technology"
   Mahdi Khajepour, Abbas Bayati, Behrad Rezaee, Alireza Khatami, Mohmmad Amin Soltani, Ghader Faraji, Karen Abrinia, Mostafa Baghani, Majid Baniassadi
   Journal of Materials Research and Technology-JMR&T, Vol. 33, pp.480-490, 2024
8. "Development and 4D printing of magneto-responsive PMMA/TPU/Fe3O4 nanocomposites with superior shape memory and toughness properties"
   Afshin Ahangari, Hossein Doostmohammadi, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
   EUROPEAN POLYMER JOURNAL, Vol. 220, 2024
9. "4D Printing of Multifunctional and Biodegradable PLA-PBAT-Fe3O4 Nanocomposites with Supreme Mechanical and Shape Memory Properties"
   Mohammad Amin Yousefi, Davood Rahmatabadi, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
   MACROMOLECULAR RAPID COMMUNICATIONS, Vol. -, pp.1-18, 2024
10. "Poly(ethylene terephthalate) glycol/carbon black composites for 4D printing"
    Davood Rahmatabadi, Abbas Bayati, Mahdi Khajepour, Kiandokht Mirasadi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 325, 2024
11. "4D printing thermo-magneto-responsive PETG-Fe3O4 nanocomposites with enhanced shape memory effects"
    Davood Rahmatabadi, Kiandokht Mirasadi, Abbas Bayati, Mahdi Khajepour, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    Applied Materials Today, Vol. 40, 2024
12. "Multiscale investigation of debonding behavior in anisotropic graphene–polyethylene metamaterial nanocomposites"
    Mohammad Safaei, M. R. Karimi, Daniyal Pourbandari, Mostafa Baghani, Danyel George, Majid Baniassadi
    CONTINUUM MECHANICS AND THERMODYNAMICS, Vol. 36, No 6, pp.1767-1785, 2024
13. "Numerical Implementation of A Nonlocal Damage Model For A Stress Regime-Dependent Creep Constitutive Model"
    Behzad Hajivand Dastgerdi, Mostafa Baghani
    Journal of solid mechanics, Vol. 16, No 1, pp.1-13, 2024
14. "Hydrogel‐Based Capacitive Sensor Model for Ammonium Monitoring in Aquaculture"
    Mohammad Mirzaee, Mahdi Askari-Sedeh, Ali Zolfagharian, Mostafa Baghani
    ADVANCED ENGINEERING MATERIALS, Vol. -, pp.1-11, 2024
15. "Microencapsulation of natural products using spray drying; an overview"
    Mahshid Mardani, Saeed Siahtiri, Masoud Besati, Mostafa Baghani, Majid Baniassadi, Alireza Mahdavi Nejad
    JOURNAL OF MICROENCAPSULATION, Vol. 41, No 7, pp.649-678, 2024
16. "Advancing sustainable shape memory polymers through 4D printing of polylactic acid-polybutylene adipate terephthalate blends"
    Davood Rahmatabadi, Mahdi Khajepour, Abbas Bayati, Kiandokht Mirasadi, Mohammad Amin Yousefi, Atefeh Shegeft, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    EUROPEAN POLYMER JOURNAL, Vol. 216, 2024
17. "Fractal Circuit Architectures for Spatially Controlled Heating and Multi-Modal Shape Programming of Electro-Active Shape Memory Polymers"
    Alireza Enferadi, Majid Baniassadi, Mostafa Baghani
    International Journal of Applied Mechanics, Vol. 16, No 6, 2024
18. "4D Printing of Magneto-Thermo-Responsive PLA/PMMA/Fe3O4 Nanocomposites with Superior Shape Memory and Remote Actuation"
    Hossein Doostmohammadi, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. 309, No 9, 2024
19. "Multiscale modeling of unfolding and bond dissociation of rubredoxin metalloprotein"
    Aliakbar Sheikhzadeh, Mohammad Safaei, Vahid Fadaei Naeini, Mostafa Baghani, Masumeh Foroutan, Majid Baniassadi
    JOURNAL OF MOLECULAR GRAPHICS & MODELLING, Vol. 129, No 108749, 2024
20. "Influence of Programming and Recovery Parameters on Compressive Behaviors of 4D‐Printed Biocompatible Polyvinyl Chloride or Vinyl–Poly(ε‐Caprolactone) Blends"
    Davood Rahmatabadi, Mohammad Aberoumand, kianoush Soltanmohammadi, Elias Soleiman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    ADVANCED ENGINEERING MATERIALS, Vol. 26, No 12, 2024
21. "Design, processing, 3D/4D printing, and characterization of the novel PETG–PBAT blends"
    Saeed J. A. Ali, Davood Rahmatabadi, Mostafa Baghani, Majid Baniassadi
    JOURNAL OF MATERIALS SCIENCE, Vol. 59, pp.9150-9164, 2024
22. "Experimental Evaluation of Mechanical Properties, Thermal Analysis, Morphology, Printability, and Shape Memory Performance of the Novel 3D Printed PETG‐EVA Blends"
    Saeed J. A. Al, D.. Rahmat Abadi, Mostafa Baghani, Majid Baniassadi
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. -, 2024
23. "3D and 4D Printing of PETG–ABS–Fe3O4 Nanocomposites with Supreme Remotely Driven Magneto-Thermal Shape-Memory Performance"
    Kiandokht Mirasadi, Davood Rahmatabadi, Ismaeil Ghasemi, Mohammad Khodaei, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
    Polymers, Vol. 16, No 10, 2024
24. "3D-Printed Polycaprolactone-Based Containing Calcium Zirconium Silicate: Bioactive Scaffold for Accelerating Bone Regeneration"
    Hosein Emadi, Mostafa Baghani, Maryam Masoudi Rad, Bahareh Hoomehr, Majid Baniassadi, Saeid Lotfian
    Polymers, Vol. 16, No 10, 2024
25. "Insight into single-helix intelligent shape memory polymer cables: modeling and optimization under finite sliding contact"
    Alireza Enferadi, Alireza Ostadrahimi, Guoqiang Lii, Majid Baniassadi, Mostafa Baghani
    Smart Materials and Structures, Vol. 33, No 5, 2024
26. "4D printing and annealing of PETG composites reinforced with short carbon fibers"
    Davood Rahmatabadi, Elias Soleiman, Mahshid Fallah MinBashi, Mohammad Aberoumand, kianoush Soltanmohammadi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    PHYSICA SCRIPTA, Vol. 99, 2024
27. "3D printing super stretchable propylene-based elastomer"
    Abbas Bayati, Davood Rahmatabadi, Ismaeil Ghasemi, Mohammad Khodaei, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    MATERIALS LETTERS, Vol. 361, 2024
28. "Semi-analytical modeling of electro-strictive behavior in dielectric elastomer tube actuators"
    Mahdi Askari-Sedeh, Mostafa Baghani
    PHYSICA SCRIPTA, Vol. 99, No 5, 2024
29. "Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review"
    Armin Karimi, Davood Rahmatabadi, Mostafa Baghani
    Polymers, Vol. 16, No 6, 2024
30. "Investigating the Effect of ABS on the Mechanical Properties, Morphology, Printability, and 4D Printing of PETG‐ABS Blends"
    Kiandokht Mirasadi, Davood Rahmatabadi, Ismaeil Ghasemi, Mohammad Khodaei, Majid Baniassadi, Mostafa Baghani
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. 309, No 6, 2024
31. "Cold programming of ordered porous PETG 4D printed by material extrusion"
    Elyas Soleyman, Davood Rahmatabadi, Mohammad Aberoumand, kianoush Soltanmohammadi, I.. Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 24, 2024
32. "In silico optimization of aligned fiber electrodes for dielectric elastomer actuators"
    Mohammad Reza FIroozan, Majid Baniassadi, Mostafa Baghani, Alex Chortos
    Scientific Reports, Vol. 14, No 1, 2024
33. "Effects of TPU on the mechanical properties, fracture toughness, morphology, and thermal analysis of 3D-printed ABS-TPU blends by FDM"
    kianoush Soltanmohammadi, Davood Rahmatabadi, Mohammad Aberoumand, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, Vol. -, 2024
34. "Enhancing the Thermal Performance of Shape Memory Polymers: Designing a Minichannel Structure"
    Saed Beshkoofe, Majid Baniassadi, Alireza Mahdavinejad, Azadeh Sheidaei, Mostafa Baghani
    Polymers, Vol. 16, No 4, 2024
35. "Development of 3D-Printed PCL/ Baghdadite Nanocomposite Scaffolds for Bone Tissue Engineering Applications"
    Hosein Emadi, Mostafa Baghani, Mohammad Khodaei, Majid Baniassadi, Fariborz Tavangarian
    JOURNAL OF POLYMERS AND THE ENVIRONMENT, Vol. -, 2024
36. "Developing a multiscale approach for damage analysis of functionalized-GNP/PET nanocomposite"
    Mohammad Safaei, Daniel Pourbandari, Mohammadreza Karimi, Mostafa Baghani, Karen Abrinia, Kui Wang, Majid Baniassadi
    JOURNAL OF MATERIALS SCIENCE, Vol. 59, No 7, pp.2907-2923, 2024
37. "On the extension-torsion of short hyperelastic tubes of axially functionally-graded materials"
    Mahdi Askari-Sedeh, Mostafa Baghani
    ENGINEERING STRUCTURES, Vol. 301, 2024
38. "Direct Pellet Three-Dimensional Printing of Polybutylene Adipate-co-Terephthalate for a Greener Future"
    Armin Karimi, Davood Rahmatabadi, Mostafa Baghani
    Polymers, Vol. 16, No 2, 2024
39. "4D printing of porous PLA-TPU structures: effect of applied deformation, loading mode and infill pattern on the shape memory performance"
    Davood Rahmatabadi, kianoush Soltanmohammadi, Mohammad Aberoumand, Elias Soleiman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    PHYSICA SCRIPTA, Vol. 99, No 2, 2024
40. "An investigation on an SMA valve in micro-channel through FSI approach"
    Saed Beshkoofe, Mostafa Baghani, Majid Baniassadi, Hamid Shahsavari
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, Vol. 2450028, 2024
41. "Innovative multiphysics approach for designing high-performance thermo-responsive shape memory polymer microvalve"
    Alireza Enferadi, Majid Baniassadi, Mostafa Baghani
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 103, 2024
42. "Nonlinear vibrational response of a deformable sandwich structure for morphing wing applications: Modeling, construction, and experimental tests"
    Jafar Pashazadeh, Mohammad Reza Zakerzadeh, Mostafa Baghani
    STRUCTURES, Vol. 59, 2024
43. "Finite Bending of Fiber-Reinforced Visco-Hyperelastic Material: Analytical Approach and FEM"
    Jafar Pashazadeh, Alireza Ostadrahimi, Mostafa Baghani, Ehunsoo Choi
    MATERIALS, Vol. 17, No 1, 2023
44. "Application of the Quality by Design Concept (QbD) in the Development of Hydrogel-Based Drug Delivery Systems"
    Seyed-Farid Mohseni-Motlagh, Roshanak Dolatabadi, Majid Baniassadi, Mostafa Baghani
    Polymers, Vol. 15, No 22, 2023
45. "Stress recovery and stress relaxation behaviors of PVC 4D printed by FDM technology for high-performance actuation applications"
    Mohammad Aberoumand, Davood Rahmatabadi, kianoush Soltanmohammadi, Elyas Soleyman, اسماعیل قاسمی, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    SENSORS AND ACTUATORS A-PHYSICAL, Vol. 361, 2023
46. "Novel modified triply periodic minimal surfaces (MTPMS) developed using genetic algorithm"
    Saeed Khaleghi, Mostafa Baghani, Morad Karimpour, Masoud Shariat Panahi, Kui Wang, Majid Baniassadi
    Journal of Materials Research and Technology-JMR&T, Vol. 26, No 1, pp.2881-2906, 2023
47. "Developing Multi-Scale Model for Graphene Cement Nanocomposite Study of Damage Initiation"
    Hamic Haghverdian, Danial Pourbandari, Abolfazl Alizadeh Sahraei, Hamidreza Nasersaeed, Majid Baniassadi, Mostafa Baghani
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, Vol. -, 2023
48. "pH-Sensitive Hydrogel Bilayers: Investigation on Transient Swelling-Induced Bending through Analytical and FEM Approaches"
    Mahdi Askari-Sedeh, Mostafa Baghani
    GELS, Vol. 9, No 7, 2023
49. "Tablet Geometry Effect on the Drug Release Profile from a Hydrogel-Based Drug Delivery System"
    Seyed-Farid Mohseni-Motlagh, Roshanak Dolatabadi, Majid Baniassadi, Morad Karimpour, Mostafa Baghani
    Pharmaceutics, Vol. 15, No 7, 2023
50. "Numerical simulation of the effect of geometric parameters on silicone airway stent migration"
    Maryam Mazraehei Farahani, Arman Bakhtiyari, Saed Beshkoofe, Abdolmohammad Kajbafzadeh, Arda Kiani, Amir Hossein Eskandari, Majid Baniassadi, Mostafa Baghani
    FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, Vol. 9, 2023
51. "Analytical and numerical solution for multiple shape memory effect of smart corrugated-core sandwich panels with different patterns"
    Arman Bakhtiyari, Mostafa Baghani, MohammadAli Maleki-Bigdeli, Saeid Sohrabpour
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 100, 2023
52. "Repeatable compressive functionality of 3D printed shape-memory thin-walled corrugated structures"
    Guangyu Sun, Jin Wang, Kui Wang, Mostafa Baghani, Yong Peng, Yanni Rao
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 257, 2023
53. "Design and fabrication of silicone-silica nanocomposites airway stent"
    Zahra Mora Haseli, Maryam Mazraehei Farahani, Majid Baniassadi, Seyed Farshid Chini, Abdol-Mohammad Kajbafzadeh, Arda Kiani, Mostafa Baghani
    Frontiers in Materials, Vol. 10, 2023
54. "Shape memory performance assessment of FDM 3D printed PLA-TPU composites by Box-Behnken response surface methodology"
    D.. Rahmat Abadi, kianoush Soltanmohammadi, Mostafa Pahlavani, Mohammad Aberoumand, Elias Soleiman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 127, pp.935-950, 2023
55. "Toughening PVC with Biocompatible PCL Softeners for Supreme Mechanical Properties, Morphology, Shape Memory Effects, and FFF Printability"
    D.. Rahmat Abadi, Mohammad Aberoumand, kianoush Soltanmohammadi, Elias Soleiman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. -, No 2300114, pp.1-13, 2023
56. "Influence of Curing Agents Molecular Structures on Interfacial Characteristics of Graphene/Epoxy Nanocomposites: A Molecular Dynamics Framework"
    Saeed Siahtiry, Abolfazl Alizadeh Sahraei, Abdol Hadi Mokarizadeh, Mostafa Baghani, Mahdi Bodaghi, Majid Baniassadi
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. -, No 2300030, 2023
57. "4D printing of PLA-TPU blends: effect of PLA concentration, loading mode, and programming temperature on the shape memory effect"
    Davood Rahmatabadi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    JOURNAL OF MATERIALS SCIENCE, Vol. 58, No 16, pp.7227-7243, 2023
58. "A Modified Constitutive Model for Shape Memory Polymers Based on Nonlinear Thermo-Visco-Hyperelasticity with Application to Multi-Physics Problems"
    Arman Bakhtiyari, Mehdi Baniasadi, Mostafa Baghani
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, Vol. 15, No 4, 2023
59. "Coupled Chemo-Mechanical Swelling Behavior of PH-Sensitive Hollow Cylinder Hydrogels under Extension–Torsion and Internal Pressure: Analytical and 3D FEM Solutions"
    Mahdi Askari-Sedeh, Mostafa Baghani
    International Journal of Applied Mechanics, Vol. 15, No 4, 2023
60. "Reversible energy absorbing behaviors of shape-memory thin-walled structures"
    Kui Wang, Guangyu Sun, Jin Wang, Song Yao, Mostafa Baghani, Yong Peng
    ENGINEERING STRUCTURES, Vol. 279, 2023
61. "4D Printing of Polyvinyl Chloride (PVC): A Detailed Analysis of Microstructure, Programming, and Shape Memory Performance"
    Mohammad Aberoumand, kianoush Soltanmohammadi, Davood Rahmatabadi, Elias Soleiman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. -, 2023
62. "TPMS Metamaterial Structures Based on Shape Memory Polymers: Mechanical, Thermal and Thermomechanical Assessment"
    Fatemeh Sadeghi, Majid Baniassadi, Alireza Shahidi, Mostafa Baghani
    Journal of Materials Research and Technology-JMR&T, Vol. 23, pp.3726-3743, 2023
63. "Design of Refractory Alloys for Desired Thermal Conductivity via AI-Assisted In-Silico Microstructure Realization"
    Seyed Mohammad Ali Seyed Mahmoud, Ghader Faraji, Mostafa Baghani, Mohammad Saber Hashemi, Azadeh Sheidaei, Majid Baniassadi
    MATERIALS, Vol. 16, No 3, 2023
64. "Transient swelling-induced finite bending of hydrogel-based bilayers: analytical and FEM approaches"
    Arya Amiri, Majid Baniassadi, Mostafa Baghani
    APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. 44, No 2, pp.273-288, 2023
65. "Unraveling the effect of hydrogenation on the mechanical properties of coiled carbon nanotubes: a molecular dynamics study"
    Mahdi Azhari Saray, Mostafa Baghani, Ali Rajabpour, Ali Sharifian, Majid Baniassadi
    PHYSICAL CHEMISTRY CHEMICAL PHYSICS, Vol. 25, No 23, pp.15988-16000, 2023
66. "A viscoelastic-viscoplastic constitutive model for high-temperature response of an advanced steel verified by biaxial measurement experiments"
    Amin Kazemi, Mostafa Baghani, Hamid Shahsavari, Karen Abrinia
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 97, 2023
67. "Four-dimensional printing of acrylonitrile butadiene styrene – thermoplastic polyurethane shape memory polymers with excellent material and interfacial adhesion performance"
    kianoush Soltanmohammadi, Mohammad Aberoumand, Davood Rahmatabadi, Elyas Soleyman, Sogol Ghasemi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    Express Polymer Letters, Vol. 17, No 11, pp.1082-1095, 2023
68. "An investigation on multilayer shape memory polymers under finite bending through nonlinear thermo-visco-hyperelasticity"
    Arman Bakhtiyari, Mostafa Baghani, Saeid Sohrabpour
    APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. 44, No 1, pp.73-88, 2022
69. "A New Strategy for Achieving Shape Memory Effects in 4D Printed Two-Layer Composite Structures"
    Davood Rahmatabadi, Mohammad Aberoumand, kianoush Soltanmohammadi, Elyas Soleyman, Esmaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Ali Zolfagharian, Mahdi Bodaghi, Mostafa Baghani
    Polymers, Vol. 14, No 24, 2022
70. "Development of Pure Poly Vinyl Chloride (PVC) with Excellent 3D Printability and Macro‐ and Micro‐Structural Properties"
    Davood Rahmatabadi, kianoush Soltanmohammadi, Mohammad Aberoumand, Elias Soleiman, Esmaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. -, 2022
71. "4D Printing‐Encapsulated Polycaprolactone–Thermoplastic Polyurethane with High Shape Memory Performances"
    D.. Rahmat Abadi, Mohammad Aberoumand, kianoush Soltanmohammadi, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    ADVANCED ENGINEERING MATERIALS, Vol. 2201309, 2022
72. "Data-driven modeling of an elastomer bushing system under various visco-hyperelastic deformations"
    AmirMohammad Daareyni, Mostafa Baghani, Farshid Ghezelbash, Mohammad Reza Zakerzadeh
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 214, 2022
73. "3D printing of PLA-TPU with different component ratios: Fracture toughness, mechanical properties, and morphology"
    Davood Rahmatabadi, Esmaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    Journal of Materials Research and Technology-JMR&T, Vol. 21, No 1, pp.3970-3981, 2022
74. "Shape-memory polymer metamaterials based on triply periodic minimal surfaces"
    Nima Roudbarian, Ehsan Jebellat, Seyedfarzad Famouri, Mehdi Baniasadi, Reza Hedayati, Mostafa Baghani
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 96, 2022
75. "Fabrication, characterization, and modeling of a structural flexible skin for applications in morphing wings"
    Amin Hajarian, Omid Zargar, Mohammad Reza Zakerzadeh, Saeid Baghernejad, Mostafa Baghani
    MECHANICS OF MATERIALS, Vol. -, 2022
76. "An anisotropic constitutive model for fiber reinforced salt-sensitive hydrogels"
    Hamid Reza Safavi, Arya Amiri, Majid Baniassadi, Ali Zolfagharian, Mostafa Baghani
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. -, pp.1-14, 2022
77. "4D printing of PET-G via FDM including tailormade excess third shape"
    Elias Soleiman, Mohammad Aberoumand, kianoush Soltanmohammadi, Davood Rahmatabadi, Esmaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    Manufacturing Letters, Vol. 33, pp.1-4, 2022
78. "Silk Fibroin Hydrogel Reinforced With Magnetic Nanoparticles as an Intelligent Drug Delivery System for Sustained Drug Release"
    Mahsa Haghighattalab, Abdolmohammad Kajbafzadeh, Mostafa Baghani, Ziba Gharehnazifam, Bahareh Mohammadi Jobani, Majid Baniassadi
    FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY, Vol. 10, No 1, 2022
79. "Transient swelling of cylindrical hydrogels under coupled extension-torsion: Analytical and 3D FEM solutions"
    Arya Amiri, Majid Baniassadi, Mohammad Reza Bayat, Mostafa Baghani
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. -, 2022
80. "Shape memory performance of PETG 4D printed parts under compression in cold, warm, and hot programming"
    Elyas Soleyman, Davood Rahmatabadi, kianoush Soltanmohammadi, Mohammad Aberoumand, Esmaeil Ghasemi, Karen Abrinia, Majid Baniassadi, Kui Wang, Mostafa Baghani
    Smart Materials and Structures, Vol. 31, No 8, 2022
81. "Multiphysics modeling and experiments on ultrasound-triggered drug delivery from silk fibroin hydrogel for Wilms tumor"
    Ziba Gharehnazifam, Roshanak Dolatabadi, Majid Baniassadi, Hamid Shahsavari, Abdol-Mohammad Kajbafzadeh, Karen Abrinia, Kimia Gharehnazifam, Mostafa Baghani
    INTERNATIONAL JOURNAL OF PHARMACEUTICS, Vol. 621, 2022
82. "Simulation of Fouling Effects on a Two-Stage Axial Turbine Performance"
    Hadi Karrabi, Ali Samaeenia, Abolhassan Asgarshamsi, Mostafa Baghani
    Energy Equipment and Systems, Vol. 10, No 2, pp.83-99, 2022
83. "pH-Responsive Hydrogel Bilayer With Reversible, Bidirectional Bending Behavior"
    Mohammad Shojaeifard, Soha Niroumandi, Mostafa Baghani
    Frontiers in Materials, Vol. 9, 2022
84. "Matrix–fiber interfacial debonding in soft composite materials: Cyclically behavior modeling and microstructural evolution"
    Mohammad Reza Mansouri, P.F. Fuches, Mostafa Baghani, C.A. Schuecker
    COMPOSITES PART B-ENGINEERING, Vol. 237, 2022
85. "Statistical prediction of bone microstructure degradation to study patient dependency in osteoporosis"
    Seyedfarzad Famouri, Mostafa Baghani, Azadeh Sheidaei, Daniel George, Maryam Mazraehei Farahani, Masoud Shariat Panahi, Majid Baniassadi
    MATHEMATICS AND MECHANICS OF SOLIDS, Vol. -, 2022
86. "Assessment of controllable shape transformation, potential applications, and tensile shape memory properties of 3D printed PETG"
    Elias Soleiman, Mohammad Aberoumand, Davood Rahmatabadi, kianoush Soltanmohammadi, Esmaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    Journal of Materials Research and Technology-JMR&T, Vol. 18, pp.4201-4215, 2022
87. "Insights into thermal characteristics of spiral carbon-based nanomaterials: From heat transport mechanisms to tunable thermal diode behavior"
    Ali Sharifian, Taraneh Karbaschi, Ali Rajabpour, Mostafa Baghani, Jianyang Prof. Wu, Majid Baniassadi
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 189, No 189, 2022
88. "Prediction of bone microstructures degradation during osteoporosis with fuzzy cellular automata algorithm"
    Armin Shahmohammadi, Seyedfarzad Famouri, Seyed Mohammad Reza Hosseini, Maryam Mazraehei Farahani, Mostafa Baghani, Daniel George, Majid Baniassadi
    MATHEMATICS AND MECHANICS OF SOLIDS, Vol. -, 2022
89. "Swelling of pH-sensitive hydrogel pressure vessel under altered-pH coupled with inflation, extension, and torsion"
    Mohammad Shojaeifard, Soha Niroumandi, Mostafa Baghani
    MECCANICA, Vol. -, 2022
90. "A comprehensive experimental investigation on 4D printing of PET-G under bending"
    Mohammaf Aberoumand, Kianoosh Soltanmohammadi, Elyas Soleyman, Davood Rahmatabadi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    Journal of Materials Research and Technology-JMR&T, Vol. 18, pp.2552-2569, 2022
91. "Programmable self-folding of trilayer and bilayer-hinge structures by time-dependent swelling of tough hydrogels"
    Mohammad Shojaeifard, Soha Niroumandi, Mostafa Baghani
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. -, 2022
92. "Programming shape-shifting of flat bilayers composed of tough hydrogels under transient swelling"
    Mohammad Shojaeifard, Soha Niroumandi, Mostafa Baghani
    ACTA MECHANICA, Vol. 233, No 1, pp.213-232, 2022
93. "Conical coiled carbon nanotubes with highly controllable mechanical properties"
    Taraneh Karbaschi, Ali Sharifian, Parmida Fareghi, Mostafa Baghani, Jianyang Prof. Wu, Majid Baniassadi
    Materials Today Communications, Vol. 29, No 1, 2021
94. "Computational analysis of vincristine loaded silk fibroin hydrogel for sustained drug delivery applications: Multiphysics modeling and experiments"
    Ziba Gharehnazifam, Roshanak Dolatabadi, Majid Baniassadi, Hamid Shahsavari, Abdol-Mohammad Kajbafzadeh, Karen Abrinia, Mostafa Baghani
    INTERNATIONAL JOURNAL OF PHARMACEUTICS, Vol. 609, No 1, 2021
95. "On the directional elastic modulus of the TPMS structures and a novel hybridization method to control anisotropy"
    Saeed Khaleghi, Fayyaz Nosouhi Dehnavi, Mostafa Baghani, Masoud Safdari, Kui Wang, Majid Baniassadi
    MATERIALS & DESIGN, Vol. 210, No 1, 2021
96. "Simulating favorable adsorption in lithium-ion batteries using a novel cellular-automaton-based method"
    Omid Ziaee, Naeem Zolfaghari, Mostafa Baghani, Majid Baniassadi
    PHYSICA SCRIPTA, Vol. 96, No 12, 2021
97. "Anatase TiO2 nanotubes as Li-ion battery anodes: A molecular dynamics study of Li-ion adsorption on anatase nanotubes"
    Iman Zeydabadi, Naeem Zolfaghari, Mahmoud Mousavi Mashhadi, Mostafa Baghani, Majid Baniassadi
    SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, Vol. 47, 2021
98. "Finite Deformation of Swollen pH-Sensitive Hydrogel Cylinder Under Extension and Torsion and its Poynting Effect: Analytical Solution and Numerical Verification"
    Soha Niroumandi, Mohammad Shojaeifard, Mostafa Baghani
    International Journal of Applied Mechanics, Vol. 13, No 6, 2021
99. "A modified simulated annealing algorithm for hybrid statistical reconstruction of heterogeneous microstructures"
    Ali Haghverdi, Majid Baniassadi, Mostafa Baghani, Abolfazl Alizadeh Sahraei, Hamid Garmestani, Masoud Safdari
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 197, 2021
100. "Study of a magnetic SMA-based energy harvester using a corrugated structure"
     Omid Safari, Mohammad Reza Zakerzadeh, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 32, No 16, pp.1855-1866, 2021
101. "Enhancing shape memory properties of multi-layered and multi-material polymer composites in 4D printing"
     Nima Roudbarian, Mehdi Baniasadi, Pooyan Nayyeri, mehdi ansari, Reza Hedayati, Mostafa Baghani
     Smart Materials and Structures, Vol. 30, No 10, 2021
102. "Development of a large strain formulation for multiple shape-memory-effect of polymers under bending"
     Arman Bakhtiyari, Mehdi Baniasadi, Mostafa Baghani
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 204, 2021
103. "A New Statistical Descriptor for the Physical Characterization and 3D Reconstruction of Heterogeneous Materials"
     AmirHossein Bagherian Rekavandi, Seyedfarzad Famouri, Mostafa Baghani, Daniel George, Azadeh Sheidaei, Majid Baniassadi
     TRANSPORT IN POROUS MEDIA, Vol. -, 2021
104. "Hygrothermal aging effects on the mechanical properties of 3D printed composites with different stacking sequence of continuous glass fiber layers"
     Kui Wang, Ying Chen, Hongmei Long, Mostafa Baghani, Yani Rao, Yong Peng
     POLYMER TESTING, Vol. 100, 2021
105. "Mechanical properties improvement of shape memory polymers by designing the microstructure of multi-phase heterogeneous materials"
     Mohamad mahdi Rafiee, Majid Baniassadi, Kui Wang, Mehdi Baniasadi, Mostafa Baghani
     COMPUTATIONAL MATERIALS SCIENCE, Vol. 196, 2021
106. "An Electrodiffusion Model Coupled with Fluid-Flow Effects for an On-Chip Electromembrane Extraction System"
     Roshanak Dolatabadi, Ziba Gharehnazifam, Fatemeh Moraffah, Ali Mohammadi, Mostafa Baghani
     TRANSPORT IN POROUS MEDIA, Vol. -, 2021
107. "A Novel Method for Implementation of the Corrosion Induced Cracks in the Finite Element Models of the Reinforced Concrete Structures"
     Shayan Fahimi, Mohammad Reza Zakerzadeh, Mostafa Baghani, Kamyab Zandi
     Scientia Iranica, Vol. 28, No 3, pp.1079-1095, 2021
108. "On Single and Multiple pH-Sensitive Hydrogel Micro-valves: A 3D Transient Fully Coupled Fluid–Solid Interaction Study"
     Soha Niroumandi, Mohammad Shojaeifard, Mostafa Baghani
     TRANSPORT IN POROUS MEDIA, Vol. -, 2021
109. "Design and Shape Optimization of a Biodegradable Polymeric Stent for Curved Arteries Using FEM"
     Yasaman Baradaran, Mostafa Baghani, Morteza Kazempour, Seyed Kianoosh Hosseini, Morad Karimpour, Majid Baniassadi
     FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, Vol. 7, No 1, 2021
110. "Numerical Investigation of Axonal Damage for Regular and Irregular Axonal Distributions"
     Seid Morteza Kazempour, Amin Kazempour, Majid Baniassadi, Yves Remond, Mostafa Baghani
     FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, Vol. 7, 2021
111. "PH-sensitive hydrogel-based valves: A transient fully-coupled fluid-solid interaction study"
     Soha Niroumandi, Mohammad Shojaeifard, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 33, No 1, pp.196-209, 2021
112. "A computational simulation of electromembrane extraction based on Poisson - Nernst - Planck equations"
     Roshanak Dolatabadi, Ali Mohammadi, Mostafa Baghani
     ANALYTICA CHIMICA ACTA, Vol. 1158, 2021
113. "Development of an analytical framework for viscoelastic corrugated-core sandwich plates and validation against FEM"
     MohammadAli Maleki-Bigdeli, Sara Sheikhi, Mostafa Baghani
     MECCANICA, Vol. 56, No 8, pp.2103-2120, 2021
114. "Modeling of human intervertebral disc annulus fibrosus with complex multi-fiber networks"
     Farshid Ghezelbash, Amirhossein Eskandari, Aboulfazl Shirazi-Adl, Seid Morteza Kazempour, Javad Tavakoli, Mostafa Baghani, John J Costi
     ACTA BIOMATERIALIA, Vol. 123, pp.208-221, 2021
115. "Development and implementation of a geometrically nonlinear beam theory model for SMA composite beams with asymmetric behavior"
     Kosar Samadi-aghdam, Pouya Fahimi, Majid Baniassadi, Mostafa Baghani
     COMPOSITE STRUCTURES, Vol. 259, 2021
116. "A review on swelling theories of pH-sensitive hydrogels"
     Mohammadreza Bayat, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 32, pp.2349-2365, 2021
117. "Constitutive Modeling of multi-stimuli-responsive shape memory polymers with multi-functional capabilities"
     Mehdi Baniasadi, Ebrahim Yarali, Mahdi Bodaghi, Ali Zolfagharian, Mostafa Baghani
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 192, 2021
118. "A Finite Strain Analytical Solution for Stress-Softening of Hyperelastic Materials Under Cyclic Bending"
     Jafar Pashazadeh, Arya Amiri, Ali Taheri, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. 13, No 1, 2021
119. "Crack self-healing of thermo-responsive shape memory polymers with application to control valves, filtration, and drug delivery capsule"
     Mehdi Baniasadi, Ebrahim Yarali, Alireza Foyouzat, Mostafa Baghani
     EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 85, 2021
120. "A combined experimental-numerical analysis of a novel deformable sandwich structure for morphing wing applications"
     Amin Hajarian, Mohammad Reza Zakerzadeh, Hamid Salehi, Mostafa Baghani
     JOURNAL OF SANDWICH STRUCTURES & MATERIALS, Vol. -, 2020
121. "Refining anticipation of degraded bone microstructures during osteoporosis based on statistical homogenized reconstruction method via quality of connection function"
     Seyedfarzad Famouri, Amirhossein Bagherian, Armin Shahmohammadi, Daniel George, Mostafa Baghani, Majid Baniassadi
     International Journal of Computational Materials Science and Engineering, Vol. 09, No 4, 2020
122. "Modeling of Damage Evolution in a Patient-Specific Stenosed Artery upon Stent Deployment"
     Fatemeh Rouhani, Behrooz Fereidoonnezhad, Mohammad Reza Zakerzadeh, Mostafa Baghani
     JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, Vol. 12, No 9, 2020
123. "An experimental investigation on shape memory polymer and metallic stents under bending and radial compression"
     mehdi ansari, Mohammad Golzar, Mostafa Baghani, Mehrnoosh Taghavimehr, Mehran Abbasi-shirsavar, Mahsa Yahyavi
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 2, No 4, 2020
124. "Large deformation of hyperelastic thick-walled vessels under combined extension-torsion-pressure: analytical solution and FEM"
     Mohammad Shojaeifard, Kui Wang, Mostafa Baghani
     MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. in press, pp.1-18, 2020
125. "Multiple Shape Memory Effect for Smart Helical Springs with Variable Stiffness over Time and Temperature"
     Mehdi Baniasadi, Alireza Foyouzat, Mostafa Baghani
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 182, 2020
126. "Coupled thermo-mechanical swelling of a thermo-responsive hydrogel hollow cylinder under extension-torsion: Analytical Solution and FEM"
     Mohammad Shojaeifard, Roshanak Dolatabadi, Sara Sheikhi, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 32, No 2, pp.140-155, 2020
127. "Synthesis, test, calibration and modeling of a temperature-actuated hydrogel bilayer"
     AmirHossein Nourian, Arya Amiri, Nasrin Moini, Mostafa Baghani
     Smart Materials and Structures, Vol. 29, No 10, 2020
128. "Computational modeling of degradation process on the mechanical performance of Poly-lactic acid /Magnesium composite"
     Armin Shahmohammadi, Mostafa Baghani, Masoud Shariat Panahi, Kui Wang, Ehsan Hasanpur, Majid Baniassadi
     PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 235, No 1, pp.3-18, 2020
129. "Asymmetric bending response of shape memory alloy beam with functionally graded porosity"
     Pouya Fahimi, Amin Hajarian, AmirHossein Eskandari, Ali Taheri, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 31, No 16, pp.1935-1949, 2020
130. "Developing an analytical solution for a thermally tunable soft actuator under finite bending"
     Ebrahim Yarali, Reza Noroozi, Ali Moallemi, Ali Taheri, Mostafa Baghani
     MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. in press, pp.1-15, 2020
131. "3D constitutive modeling of electro-magneto-visco-hyperelastic elastomers: a semi-analytical solution for cylinders under large torsion–extension deformation"
     Ebrahim Yarali, Mehdi Baniasadi, Mahdi Bodaghi, Mostafa Baghani
     Smart Materials and Structures, Vol. 29, No 8, 2020
132. "Numerical investigation of smart auxetic 3D meta-structures based on shape memory polymers via topology optimization"
     Ehsan Jebellat, Majid Baniassadi, Alireza Moshki, Kui Wang, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 31, No 15, pp.1838-1852, 2020
133. "Visco-hyperelastic swelling and mechanical behavior of tough pH-sensitive hydrogels: Theory development and numerical implementation"
     Mohammadreza Bayat, Kui Wang, Mostafa Baghani
     INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 152, 2020
134. "Finite strain relaxation and creep in coupled axial and torsional deformation"
     Mehdi Baniasadi, Parmida Fareghi, Fatemeh Darijani, Mostafa Baghani
     MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, Vol. in press, pp.1-17, 2020
135. "On finite bending of visco-hyperelastic materials: a novel analytical solution and FEM"
     Mohammad Shojaeifard, Sara Sheikhi, Majid Baniassadi, Mostafa Baghani
     ACTA MECHANICA, Vol. 231, No 8, pp.3435-3450, 2020
136. "Effect of prior deformation on the subsequent creep and anelastic recovery behaviour of an advanced martensitic steel: Unified constitutive modelling"
     Ehsan Hosseini, Amin Kazemi, Karen Abrinia, Hamid Shahsavari, Stuart Richard Holdswo, Mostafa Baghani
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 176, No 176, 2020
137. "Developing a beam formulation for semi-crystalline two-way shape memory polymers"
     MohammadAli Maleki-Bigdeli, Majid Baniassadi, Kui Wang, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 31, No 12, pp.1465-1476, 2020
138. "Analysis of temperature-sensitive hydrogel microvalves in a T-junction flow sorter using full scale fluid–structure interaction"
     Elham Khanjani, Arash Kargar-Estahbanaty, Ali Taheri, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 31, No 11, pp.1371-1382, 2020
139. "A comprehensive review on thermomechanical constitutive models for shape memory polymers"
     Ebrahim Yarali, Ali Taheri, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 31, No 10, pp.1243-1283, 2020
140. "Multi-Trigger Thermo-Electro-Mechanical Soft Actuators under Large Deformations"
     Ebrahim Yarali, Reza Noroozi, Armin Yousefi, Mahdi Bodaghi, Mostafa Baghani
     Polymers, Vol. 12, No 2, 2020
141. "Design and fluid-structure interaction analysis for a microfluidic T-junction with chemo-responsive hydrogel valves"
     Elham Khanjani, Amin Hajarian, Arash Kargar-Estahbanaty, Nasser Arbabi, Ali Taheri, Mostafa Baghani
     APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. 41, No 6, pp.939-952, 2020
142. "Force and multiple-shape-recovery in shape-memory-polymers under finite deformation torsion-extension"
     Mehdi Baniasadi, MohammadAli Maleki-Bigdeli, Mostafa Baghani
     Smart Materials and Structures, Vol. 29, No 5, 2020
143. "Transient swelling response of pH-sensitive hydrogels: A monophasic constitutive model and numerical implementation"
     Mohammadreza Bayat, Roshanak Dolatabadi, Mostafa Baghani
     INTERNATIONAL JOURNAL OF PHARMACEUTICS, Vol. 577, 2020
144. "On the modeling of human intervertebral disc annulus fibrosus: Elastic, permanent deformation and failure responses"
     Farshid Ghezelbash, Aboulfazl Shirazi-Adl, Mostafa Baghani, Amirhossein Eskandari
     JOURNAL OF BIOMECHANICS, Vol. 102, 2020
145. "A computational study on vascular damage caused by SMA self-expandable and balloon-expandable stents in a stenosed artery"
     Fatemeh Rouhani, Behrooz Fereidoonnezhad, Mohammad Reza Zakerzadeh, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. in press, pp.1-11, 2020
146. "Swelling response of FG temperature-sensitive hydrogel valves: analytic solution and FEM"
     Mohammad Shojaeifard, Sara Tahmasiyan, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. in press, pp.1-18, 2020
147. "Finite deformation swelling of a temperature-sensitive hydrogel cylinder under combined extension-torsion"
     Mohammad Shojaeifard, Mostafa Baghani
     APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. 41, No 3, pp.409-424, 2020
148. "Design and Manufacture of a Smart Macro-Structure with Changeable Effective Stiffness"
     Mohammad reza Hajyghasem, Majid Safarabadifarahani, Azadeh Sheidaei, Mostafa Baghani, Majid Baniassadi
     International Journal of Applied Mechanics, Vol. 12, No 1, 2020
149. "A novel machine learning based computational framework for homogenization of heterogeneous soft materials: application to liver tissue"
     Mohammad Saber Hashemi, Majid Baniassadi, Mostafa Baghani, Daniel George, Yve Remond, Azadeh Sheidaei
     BIOMECHANICS AND MODELING IN MECHANOBIOLOGY, Vol. **, pp.1-12, 2019
150. "An experimental investigation on the energy storage in a shape-memory-polymer system"
     Nima Roudbarian, Mostafa Baghani, Mehdi Baniasadi, Daniel George, Arman Mohammadi
     Energy Equipment and Systems, Vol. 7, No 4, pp.309-316, 2019
151. "The Application of Homotopy Analysis Method to Determine the Thermal Response of Convective-Radiative Porous Fins with Temperature-Dependent Properties"
     omid zargar, Masoud Molla-aghaei-roozbahani, Mohammad Bashirpour, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. 11, No 9, 2019
152. "Mathematical modeling and experimental evaluation of a prototype double-tube Magnetorheological damper"
     Ebrahim Yarali, Arman Mohammadi, Sheyda Mafakheri, Mostafa Baghani, Hamed Adibi
     SN Applied Sciences, Vol. 1, No 11, 2019
153. "Finite Bending and straightening of hyperelastic materials: analytical solution and FEM"
     Sara Sheikhi, Mohammad Shojaeifard, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. 11, No 8, 2019
154. "A combined experimental and numerical study on shape memory alloy rods under torsion"
     Pouya Fahimi, Mohammad Reza Zakerzadeh, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. in press, 2019
155. "Size dependent analysis of tapered FG micro-bridge based on a 3D beam theory"
     Shadi Haddad, Mostafa Baghani, Mohammad Reza Zakerzadeh
     Scientia Iranica, 2019
156. "Numerical Simulation of Osteoporosis Degradation at Local Scale: A Preliminary Study on the Kinematic Loss of Mechanical Bone Stiffness and Microstructure"
     Morteza Kazempour, Amirhossein Bagherian, Azadeh Sheidaei, Majid Baniassadi, Mostafa Baghani, Yve Remond, Daniel George
     Journal of Stem Cells & Regenerative Medicine, Vol. 79, pp.86-93, 2019
157. "Design, analysis and testing of a smart morphing airfoil actuated by SMA wires"
     Amin Hajarian, Mohammad Reza Zakerzadeh, Mostafa Baghani
     Smart Materials and Structures, Vol. 28, No 11, 2019
158. "Force recovery evaluation of thermo-induced shape-memory polymer stent: material, process and thermo-viscoelastic characterization"
     mehdi ansari, Mohammad Golzar, Mostafa Baghani, Mehran Abbasi-shirsavar, Mehrnoosh Taghavimehr
     Smart Materials and Structures, Vol. 28, No 9, 2019
159. "Fully-coupled transient fluid-solid interaction simulation of the pH-sensitive hydrogel-based microvalve"
     Mohammadreza Bayat, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. 11, No 7, 2019
160. "Analytical investigation of composite sandwich beams filled with shape memory polymer corrugated core"
     Samira Akbari-azar, Mostafa Baghani, Mohammad Reza Zakerzadeh, Hamid Shahsavari, Saeed Sohrabpour
     MECCANICA, Vol. 54, No 10, pp.1647-1661, 2019
161. "A Combined Experimental and Numerical study of the Effect of Surface Roughness on Nanoindentation"
     Mohsen Nazemian, Mohammad Chamani, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. 11, No 7, 2019
162. "The Role of Chemical Doping on Large Deformation Behavior of Spiral Carbon-Based Nanostructures: Unraveling Geometry-Dependent Chemical Doping Effects"
     Ali Sharifian, Vahid Fadaei Naeini, Majid Baniassadi, Jianyang Prof. Wu, Mostafa Baghani
     Journal of Physical Chemistry C, Vol. in press, 2019
163. "An Experimental Investigation on Structural Design of Shape Memory Polymers"
     Nima Roudbarian, Mehdi Baniasadi, mehdi ansari, Mostafa Baghani
     Smart Materials and Structures, Vol. in press, 2019
164. "Numerical study of patient-specific ankle-foot orthoses for drop foot patients using shape memory alloy"
     Farshid Sadeghian, Mohammad Reza Zakerzadeh, Morad Karimpour, Mostafa Baghani
     MEDICAL ENGINEERING & PHYSICS, Vol. 69, pp.123-133, 2019
165. "A novel numerical model for the prediction of patient-dependent bone density loss in microgravity based on micro-CT images"
     Amirhossein Bagherian, Mostafa Baghani, Daniel George, Yve Remond, Christine CHAPPARD, S. A. Patlazhan, Majid Baniassadi
     CONTINUUM MECHANICS AND THERMODYNAMICS, Vol. 32, 2019
166. "An implicit finite element framework considering damage and healing effects with application to cyclic moving load on asphalt pavement"
     Roozbeh Eghbalpour, Mostafa Baghani, Hamid Shahsavari
     APPLIED MATHEMATICAL MODELLING, Vol. 70, pp.139-151, 2019
167. "A combined analytical–numerical analysis on multidirectional finite bending of functionally graded temperature-sensitive hydrogels"
     Mohammad Shojaeifard, Fatemeh Rouhani, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 30, No 13, pp.1882-1895, 2019
168. "On the finite bending of functionally graded light-sensitive hydrogels"
     Mohammad Shojaeifard, Mostafa Baghani
     MECCANICA, Vol. 54, No 6, pp.841-854, 2019
169. "Hybrid IG-FE Method Applied to Cohesive Fracture/Contact in Particle-Filled Elastomeric Composites"
     Saeed Maleki Jebelli, Mahmoud Mousavi Mashhadi, Mostafa Baghani
     International Journal of Mechanics and Materials in Design, Vol. in press, 2019
170. "Implementing stretch-based strain energy functions in large coupled axial and torsional deformations of functionally graded cylinder"
     Arash Valiollahi, Mohammad Shojaeifard, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. in press, 2019
171. "Closed form solutions for large deformation of cylinders under combined extension-torsion"
     Arash Valiollahi, Mohammad Shojaeifard, Mostafa Baghani
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 157-158, pp.336-347, 2019
172. "A semi-analytical solution for finite bending of a functionally graded hydrogel strip"
     Mohammadreza Bayat, Arash Kargar-estahbanaty, Mostafa Baghani
     ACTA MECHANICA, Vol. in presss, pp.1-13, 2019
173. "Homogenization of heterogeneous brain tissue under quasi-static loading: a visco-hyperelastic model of a 3D RVE"
     Morteza Kazempour, Majid Baniassadi, Hamid Shahsavari, Yve Remond, Mostafa Baghani
     BIOMECHANICS AND MODELING IN MECHANOBIOLOGY, Vol. in press, pp.1-13, 2019
174. "Swelling-induced finite bending of functionally graded pH-responsive hydrogels: A semi-analytical method"
     Mohammad Shojaeifard, Mohammadreza Bayat, Mostafa Baghani
     APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. in press, pp.1-16, 2019
175. "Online force control of an SMA-based 2DoF human finger via inverse model and PID compensator"
     Farzam Mirzakhani, Moosa Ayati, Pouya Fahimi, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. in press, pp.1-11, 2019
176. "Numerical homogenization of coiled carbon nanotube reinforced shape memory polymer nanocomposites"
     Ebrahim Yarali, Majid Baniassadi, Mostafa Baghani
     Smart Materials and Structures, Vol. 28, No 3, 2019
177. "Computational Elucidation of Elastic Percolation Threshold in Isotropic and Anisotropic Microstructures with Voronoi Tessellation"
     Vahid Fadaei Naeini, Mohammadhossein Zarei, Majid Baniassadi, Mehdi Shirani, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. 11, No 2, 2019
178. "A semi-analytical solution for bending response of SMA composite beams considering SMA asymmetric behavior"
     Pouya Fahimi, Amirhossein Eskandari, Mostafa Baghani, Ali Taheri
     COMPOSITES PART B-ENGINEERING, Vol. 163, pp.622-633, 2019
179. "Vibration analysis of FG annular sector in moderately thick plates with two piezoelectric layers"
     Sasan Azaripour, Mostafa Baghani
     APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. in press, pp.1-22, 2019
180. "Insight of Geometry-Controlled Mechanical Properties of Spiral Carbon-Based Nanostructures"
     Ali Sharifian, Mostafa Baghani, Jianyang Jianyang Wu, Gregory M Odegard, Majid Baniassadi
     Journal of Physical Chemistry C, Vol. 123, No 5, 2019
181. "Hydrogenation-controlled mechanical properties in graphene helicoids: exceptional distribution-dependent behavior"
     Ali Sharifian, Abouzar Moshfegh, Ashkan Javadzadegan, Hamid Hassanzadeh Afrouzi, Mostafa Baghani, Majid Baniassadi
     PHYSICAL CHEMISTRY CHEMICAL PHYSICS, Vol. 21, No 23, pp.12423-12433, 2019
182. "How to characterize interfacial load transfer in spiral carbon-based nanostructure-reinforced nanocomposites: is this a geometry-dependent process?"
     Ali Sharifian, Mostafa Baghani, Gregory M Odegard, Jianyang Prof. Wu, Adri van Duin, Majid Baniassadi
     PHYSICAL CHEMISTRY CHEMICAL PHYSICS, Vol. 21, No 43, pp.23880-23892, 2019
183. "Integral sliding mode control for nonlinear damped model of arch microbeams"
     Arman Rajaei, Amin Vahidi-moghaddam, Moosa Ayati, Mostafa Baghani
     MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 25, No 1, pp.57-68, 2019
184. "An experimental and numerical investigation on active compliant joint made by shape memory alloy actuator"
     Babak Katanchi, Alireza Fathi, Mostafa Baghani, H.. Afrasiab
     PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, Vol. -, 2019
185. "Effect of Aging and Manufacturing Tolerances on Multi-Stage Transonic Axial Compressor Performance"
     Hadi Karrabi, Meysam Sajjad, Mostafa Baghani
     Energy Equipment and Systems, Vol. 7, No 2, 2018
186. "Rutting investigation of asphalt pavement subjected to moving cyclic loads: an implicit viscoelastic–viscoplastic–viscodamage FE framework"
     Mohammad Shojaeifard, Mostafa Baghani, Hamid Shahsavari
     International Journal of Pavement Engineering, Vol. in press, pp.1-15, 2018
187. "Micromechanical Modeling of the Effective Mechanical Behavior of Cerebral Cortex Tissue"
     Hamid Shahsavari, Hossein Jokar, Mojtaba Haghighi Yazdi, Mostafa Baghani, Yve Remond, Daniel George, Maryam Mazraehei Farahani, Majid Baniassadi
     Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, Vol. ***, pp.1-13, 2018
188. "Corrugated structures reinforced by shape memory alloy sheets: Analytical modeling and finite element modeling"
     Maryam Koudzari, Mohammad Reza Zakerzadeh, Mostafa Baghani
     PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, Vol. 1, No 1, 2018
189. "An experimental–numerical study on shape memory behavior of PU/PCL/ZnO ternary blend"
     Mehran Abbasi-shirsavar, Mostafa Baghani, Mehrnoosh Taghavimehr, Mohammad Golzar, Mohsen Nikzad, Mahdi Ansari, Daniel George
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 30, No 1, pp.116-126, 2018
190. "Hybrid Isogeometric-Finite Element Discretization Applied to Stress Concentration Problems"
     Saeed Maleki Jebelli, Mahmoud Mousavi Mashhadi, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. 10, No 8, 2018
191. "A Semi-Analytic Solution for Self-Healing Concrete Beams Through Stress Spectral Decomposition"
     Amin Kazemi, Mostafa Baghani, Hamid Shahsavari, Saeed Sohrabpour
     International Journal of Applied Mechanics, Vol. 10, No 7, 2018
192. "Compliant orthoses for repositioning of knee joint based on super-elasticity of shape memory alloys"
     Farshid Sadeghian, Mohammad Reza Zakerzadeh, Morad Karimpour, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 29, No 15, pp.3136-3150, 2018
193. "Numerical Analysis of Growing the Ductile Damage in Structures Reinforced by SMA Using Continuum Damage Mechanics Approach"
     Mostafa Baghani, Seyed Mehdi Ganjiani, Mohammad Rezaei
     International Journal of Applied Mechanics, Vol. 10, No 7, 2018
194. "AC and DC electrical behavior of MWCNT/epoxy nanocomposite near percolation threshold: Equivalent circuits and percolation limits"
     Abolfazl Alizadeh Sahraei, Moosa Ayati, Majid Baniassadi, Denis Rodrigue, Mostafa Baghani, Yaser Abdi
     JOURNAL OF APPLIED PHYSICS, Vol. 123, No 10, 2018
195. "3D-Printable Unit Cell Design for Cubic and Orthotropic Porous Microstructures Using Topology Optimization Based on Optimality Criteria Algorithm"
     Alireza Moshki, Akbar Ghazavizadeh, Ali Asghar Atai, Mostafa Baghani, Majid Baniassadi
     International Journal of Applied Mechanics, Vol. 10, No 6, 2018
196. "Finite element modeling and design of pH/temperature sensitive hydrogel based biphasic twisting actuators"
     Mohammad Reza Bayat, Mostafa Baghani, Hamid Shahsavari
     Scientia Iranica, 2018
197. "Shape memory characterization of poly(ε-caprolactone) (PCL)/polyurethane (PU) in combined torsion-tension loading with potential applications in cardiovascular stent"
     Mahdi Ansari, Mohammad Golzar, Mostafa Baghani, Masoud Soleimani
     POLYMER TESTING, Vol. 68, pp.424-432, 2018
198. "Effect of nanofiller geometry on the energy absorption capability of coiled carbon nanotube composite material"
     Ensieh Yousefi, Azadeh Sheidaei, Mostafa Mahdavi, Majid Baniassadi, Mostafa Baghani, Ghader Faraji
     COMPOSITES SCIENCE AND TECHNOLOGY, Vol. 153, No 1, pp.222-231, 2018
199. "Free Vibration Analysis of Rotating Functionally Graded Annular Disc of Variable Thickness Using Generalized Differential Quadrature Method"
     Mohammadhadi Jalali, Behrooz Shahriari, Omid Zargar, Mostafa Baghani, Majid Baniassadi
     Scientia Iranica, Vol. 25, No 1, pp.1-13, 2018
200. "An analytical solution for finite deformations of photo-sensitive hydrogel bilayers"
     Arash Kargar-estahbanaty, Mostafa Baghani, Nasser Arbabi
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. -, pp.1-11, 2018
201. "A Large Deformation Hybrid Isogeometric-Finite Element Method Applied to Cohesive Interface Contact/Debonding"
     Saeed Maleki Jebelli, Mahmoud Mousavi Mashhadi, Mostafa Baghani
     COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, Vol. 330, pp.395-414, 2018
202. "Mixed-mode fracture of a superelastic NiTi alloy: Experimental and numerical investigations"
     Babak Katanchi, Naghdali Choupani, Jafar Khalil-alafi, Reza Tavangar, Mostafa Baghani
     ENGINEERING FRACTURE MECHANICS, Vol. 190, pp.273-287, 2018
203. "A Thermodynamically Consistent Viscoelastic-Viscoplastic Constitutive Model for Self-Healing Materials"
     Hamid Shahsavari, Mostafa Baghani, Reza Naghdabadi, Saeid Sohrabpour
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. in press, pp.1-16, 2018
204. "A Time-Dependent Finite Element Formulation for Thick Shape Memory Polymer Beams Considering Shear Effects"
     Amirhossein Eskandari, Mostafa Baghani, Saeid Sohrabpour
     International Journal of Applied Mechanics, Vol. 10, No 4, 2018
205. "Microstructure and Mechanical Properties of CP-Titanium Processed by ECAP Followed by Warm Caliber Rolling"
     Parham Rostami, Ghader Faraji, Alireza Sadeghi, Mostafa Baghani
     TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 11, No 11, 2018
206. "An experimental investigation on training of NiTi based, shape memory alloys"
     Mehdi Ansari, Pouya Fahimi, Mostafa Baghani, Mohammad Golzar
     International Journal of Applied Mechanics, Vol. 10, No 4, 2018
207. "Manufacturing and mechanical characterization of Mg-4Y-2Nd-0.4Zr-0.25La magnesium microtubes by combined severe plastic deformation process for biodegradable vascular stents"
     S.. Amani, Ghader Faraji, Hossein Kazemi, Mostafa Baghani
     PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 40, No 742, 2018
208. "An Investigation on Thermal Stresses in FGM Hyperelastic Thick-Walled Cylinders"
     Akbar Almasi, Mostafa Baghani, Ali Moallemi, Majid Baniassadi, Ghader Faraji
     JOURNAL OF THERMAL STRESSES, Vol. 41, No 2, 2018
209. "A Combined Analytic, Numeric, and Experimental Investigation Performed on NiTi/NiTiCu Bi-Layer Composites under Tensile Loading"
     Milad Taghizadeh, Mahmoud Nili Ahmadabadi, Mostafa Baghani, Mohammad Hassan Malekoshoaraei
     ADVANCED ENGINEERING MATERIALS, Vol. 20, No 2, 2018
210. "A Combined Analytical–Numerical Investigation on Photosensitive Hydrogel Micro-Valves"
     Arash Kargar-estahbanaty, Mostafa Baghani, Hamid Shahsavari, Ghader Faraji
     International Journal of Applied Mechanics, Vol. 9, No 7, 2018
211. "Developing a visco-hyperelastic material model for 3D finite deformation of elastomers"
     Shayan Fahimi, Mostafa Baghani, Mohammad Reza Zakerzadeh, Amirhossein Eskandari
     Finite Elements in Analysis and Design, Vol. 140, pp.1-10, 2018
212. "Size dependent vibration analysis of FG micro beams in thermal environment based on modified couple stress theory"
     Mohammadhadi Jalali, Omid Zargar, Mostafa Baghani
     Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, Vol. in press, pp.1-11, 2018
213. "Large deformation and stability analysis of functionally graded pressure vessels: An analytical and numerical study"
     Ali Moallemi, Mostafa Baghani, Akbar Almasi, Mohammad Reza Zakerzadeh, Majid Baniassadi
     PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. -, 2017
214. "Application of Elastic-Damage-Heal Model for Self-Healing Concrete Thick-Walled Cylinders Through Thermodynamics of Irreversible Processes"
     Amin Kazemi, Mostafa Baghani, Hamid Shahsavari, Karen Abrinia, Majid Baniassadi
     International Journal of Applied Mechanics, Vol. 9, No 6, 2017
215. "Developing a semi-analytical model for thermomechanical response of SMA laminated beams, considering SMA asymmetric behavior"
     Ali Nassiri-monfared, Mostafa Baghani, Mohammad Reza Zakerzadeh, Pouya Fahimi
     MECCANICA, Vol. -, pp.1-15, 2017
216. "Thermomechanical Analysis of Hyperelastic Thick-Walled Cylindrical Pressure Vessels, Analytical Solutions and FEM"
     Akbar Almasi, Mostafa Baghani, Ali Moallemi
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 130, 2017
217. "Transient behavior and dynamic pull-in instability of electrostatically-actuated fluid-conveying microbeams"
     Mahdie Lotfi, Mahdi Moghimi Zand, Imman Isaac Hosseini, Mostafa Baghani, Roozbeh Dargazany
     MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 23, No 12, pp.6015-6023, 2017
218. "Developing a fast response SMA-actuated rotary actuator: modeling and experimental validation"
     Azadeh Doroudchi, Mohammad Reza Zakerzadeh, Mostafa Baghani
     MECCANICA, Vol. 52, No 11, pp.1-13, 2017
219. "Study on pH sensitive Hydrogel Micro valves: a Fluid Structure Interaction (FSI) Approach"
     Nasser Arbabi, Mostafa Baghani, Jalal Abdolahi, Hashem Mazaheri, Mahmoud Mousavi Mashhadi
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 28, No 12, pp.1589-1602, 2017
220. "Effective thermal and mechanical properties of short carbon fiber/natural rubber composites as a function of mechanical loading"
     Mostafa Mahdavi, Ensieh Yousefi, Majid Baniassadi, Morad Karimpour, Mostafa Baghani
     APPLIED THERMAL ENGINEERING, Vol. 117, pp.8-16, 2017
221. "On the Correlation of FEM and Experiments for Hyperelastic Elastomers"
     Mohammadreza Mansouri, Hossein Darijani, Mostafa Baghani
     EXPERIMENTAL MECHANICS, Vol. 57, No 2, pp.195-206, 2017
222. "Photostress analysis of stress-induced martensite phase transformation in superelastic NiTi"
     Babak Katanchi, Naghdali Choupani, Jafar Khalil-alafi, Mostafa Baghani
     MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 688, pp.202-209, 2017
223. "Finite bending of a temperature-sensitive hydrogel tri-layer: An analytical and finite element analysis"
     Jalal Abdolahi, Mostafa Baghani, Nasser Arbabi, Hashem Mazaheri
     COMPOSITE STRUCTURES, Vol. 164, pp.219-228, 2017
224. "Elastic percolation of composite structures with regular tessellations of microstructure"
     Mohammad Hosein Zarei, Vahid Fadaei Naeini, Mostafa Baghani, Jalil Jamali, Majid Baniassadi
     COMPOSITE STRUCTURES, Vol. 161, pp.513-521, 2017
225. "Developing a finite element beam theory for nanocomposite shape memory polymers with application to sustained release of drugs"
     Mostafa Baghani, Roshanak Dolatabadi, Majid Baniassadi
     Scientia Iranica, Vol. 24, No 1, pp.249-259, 2017
226. "Finite bending of bilayer pH-responsive hydrogels: A novel analytic method and finite element analysis"
     Nasser Arbabi, Mostafa Baghani, Jalal Abdolahi, Hashem Mazaheri, Mahmoud Mousavi Mashhadi
     COMPOSITES PART B-ENGINEERING, Vol. 110, pp.116-123, 2017
227. "Temperature and stress distribution in hollow annular disk of uniform thickness with quadratic temperature-dependent thermal conductivity"
     Masoud Molla-aghaei-roozbahani, Hanieh Razzaghi, Mostafa Baghani, Majid Baniassadi, مهدی لایقی فرد
     JOURNAL OF THERMAL STRESSES, Vol. in press, 2016
228. "A finite deformation viscoelastic–viscoplastic constitutive model for self-healing materials"
     Hamid Shahsavari, Reza Naghdabadi, Mostafa Baghani, Saeed Sohrabpour
     Smart Materials and Structures, Vol. 25, No 12, 2016
229. "Analytical and numerical analysis of swelling-induced large bending of thermally-activated hydrogel bilayers"
     Jalal Abdolahi, Mostafa Baghani, Nasser Arbabi, Hashem Mazaheri
     INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 99, pp.1-11, 2016
230. "Thermomechanical behavior of shape memory polymer beams reinforced by corrugated polymeric sections"
     Amin Jamalimehr, Mostafa Baghani, Majid Baniassadi, Mohammad Reza Zakerzadeh
     MECCANICA, Vol. 52, No 8, pp.1947-1962, 2016
231. "A viscoelastic-viscoplastic constitutive model considering damage evolution for time dependent materials: Application to asphalt mixes"
     Hamid Shahsavari, Reza Naghdabadi, Mostafa Baghani, Saeed Sohrabpour
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. 25, No 7, pp.921-942, 2016
232. "Coupling behavior of the pH/temperature sensitive hydrogels for the inhomogeneous"
     Hashem Mazaheri, Mostafa Baghani, Reza Naghdabadi, Saeed Sohrabpour
     Smart Materials and Structures, Vol. 25, No 8, 2016
233. "An Investigation on Thermomechanical Flexural Response of Shape-Memory-Polymer Beams"
     Masoud Molla-aghaei-roozbahani, Navid Heidarzadeh, Mostafa Baghani, Amirhossein Eskandari, Majid Baniassadi
     International Journal of Applied Mechanics, Vol. 08, No 5, 2016
234. "Elastic Percolation in Nanocomposites with Impenetrable Ellipsoidal Inclusion (Comprehensive Study of Geometry and Interphase Thickness)"
     Ziba Gharehnazifam, Majid Baniassadi, Karen Abrinia, Morad Karimpour, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. 08, No 4, 2016
235. "Dynamic and Stability Analysis of the Rotating Nanobeam in a Nonuniform Magnetic Field Considering the Surface Energy"
     Mostafa Baghani, Moslem Mohammadi, Ali Farajpour
     International Journal of Applied Mechanics, Vol. 08, No 4, 2016
236. "Performance enhancement of the double-layered micro-channel heat sink by use of tapered channels"
     Behzad Osanloo, Akbar Mohammadi-ahmar, Ali Solati, Mostafa Baghani
     APPLIED THERMAL ENGINEERING, Vol. 102, No 5, pp.1345-1354, 2016
237. "Modeling and Homogenization of Shape Memory Polymer Nanocomposites"
     Mehrzad Taherzadeh, Mostafa Baghani, Majid Baniassadi, Karen Abrinia, Masoud Safdari
     COMPOSITES PART B-ENGINEERING, Vol. 91, No 1, pp.36-43, 2016
238. "Study of non-uniform viscoelastic nanoplates vibration based on nonlocal first-order shear deformation theory"
     Mohammad Mohammadsalehi, Omid Zargar, Mostafa Baghani
     MECCANICA, Vol. 52, pp.1063-1077, 2016
239. "Stress Analysis of a Functionally Graded Micro/ Nanorotating Disk with Variable Thickness Based on the Strain Gradient Theory"
     Mostafa Baghani, Navid Heidarzadeh, Masoud Molla-aghaei-roozbahani
     International Journal of Applied Mechanics, Vol. 08, No 2, 2016
240. "Evaluation of solid oxide fuel cell anode based on active triple phase boundary length and tortuosity"
     Ali Hasanabadi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani, Mohsen Mazroee
     Energy Equipment and Systems, Vol. 4, No 1, pp.11-19, 2016
241. "Analysis of nonlinear free vibration of a beam with Magnetic Shape Memory Alloy elements"
     Mohammad Mohammadsalehi, Mohammad Reza Zakerzadeh, Mostafa Baghani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. -, pp.1-13, 2016
242. "Anisotropic continuum damage-heal modeling for concrete materials using stress spectral decomposition"
     Hamid Shahsavari, Mostafa Baghani, Saeed Sohrabpour, Reza Naghdabadi
     INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, Vol. -, pp.1-19, 2015
243. "Transient growth of a micro-void in an infinite medium under thermal load with modified Zerilli–Armstrong model"
     Mostafa Baghani, Amirhossein Eskandari, Mohammad Reza Zakerzadeh
     ACTA MECHANICA, Vol. 227, No 4, 2015
244. "Analytical couple-stress solution for size-dependent large-amplitude vibrations of FG tapered-nanobeams"
     Mostafa Baghani, Mohammad Mohammadsalehi, Pedram H-dabaghian
     Latin American Journal of Solids and Structures, Vol. 13, No 1, pp.95-118, 2015
245. "3D reconstruction of carbon nanotube networks from neutron scattering experiments"
     Mostafa Mahdavi, Majid Baniassadi, Mostafa Baghani, Mark Dadmun, Mehran Tehrani
     NANOTECHNOLOGY, Vol. 26, No 38, 2015
246. "Inhomogeneous swelling behavior of temperature sensitive PNIPAM hydrogels in micro-valves: analytical and numerical study"
     Hashem Mazaheri, Mostafa Baghani, Reza Naghdabadi, Saeed Sohrabpour
     Smart Materials and Structures, Vol. 24, No 4, 2015
247. "Inhomogeneous and homogeneous swelling behavior of temperature-sensitive poly-(N-isopropylacrylamide) hydrogels"
     Hashem Mazaheri, Mostafa Baghani, Reza Naghdabadi
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 26, No 14, pp.1-13, 2015
248. "Gaseous Slip Flow Forced Convection in Microducts of Arbitrary but Constant Cross Section"
     Mostafa Baghani, Arman Sadeghi, Mostafaa Baghani
     NANOSCALE AND MICROSCALE THERMOPHYSICAL ENGINEERING, Vol. 18, No 4, pp.354-372, 2014
249. "Electro-mechanical bending analysis of ionic polymer metal nanocomposites (IPMNCs)"
     Masoumeh Ozmaian, Mostafa Baghani, Reza Naghdabadi
     MECHANICS RESEARCH COMMUNICATIONS, Vol. 62, No 1, pp.77-82, 2014
250. "An analytical solution for shape-memory-polymer Euler–Bernoulli beams under bending"
     Mostafa Baghani, Hadi Mohammadi, Reza Naghdabadi
     INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 84, No 1, pp.84-90, 2014
251. "An analytic investigation on behavior of smart devices consisting of reinforced shape memory polymer beams"
     Mostafa Baghani, Ali Taheri
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 26, No 11, pp.1385-1394, 2014
252. "A finite deformation constitutive model for shape memory polymers based on Hencky strain"
     Mostafa Baghani, Jamal Arghavani, Reza Naghdabadi
     MECHANICS OF MATERIALS, Vol. 73, No 73, pp.1-10, 2014
253. "Gaseous Slip Flow Mixed Convection in Vertical Microducts With Constant Axial Energy Input"
     Arman Sadeghi, Mostafa Baghani, Mohammad-hassan Saeedi
     JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, Vol. 136, No 3, 2014
254. "Analytic study on torsion of shape-memory-polymer prismatic bars with rectangular cross-sections"
     Mostafa Baghani
     INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 76, No 1, pp.1-11, 2014
255. "Analyse of large amplitude free vibrations of clamped tapered beams on a nonlinear elastic foundation"
     Mostafa Baghani, Hashem Mazaheri, Hassan Salarieh
     APPLIED MATHEMATICAL MODELLING, Vol. 38, No 3, pp.1176-1186, 2014
256. "Strain Gradient Thermoelasticity of Functionally Graded Cylinders"
     حسین صادقی, Mostafa Baghani, Reza Naghdabadi
     Scientia Iranica, Vol. 21, No 4, pp.1415-1423, 2014
257. "Analytical Solution for Large amplitude Vibrations of Micro-beams Actuated by an Electro-static Force"
     Mostafa Baghani, Abolhassan Asgarshamsi, Mohammad Goharkhah
     Scientia Iranica, Vol. 20, No 5, pp.1499-1507, 2013
258. "Finite strain numerical analysis of elastomeric bushings under multi-axial loadings: a compressible visco-hyperelastic approach"
     Hesam Khajehsaeid, Mostafa Baghani, Reza Naghdabadi
     International Journal of Mechanics and Materials in Design, Vol. 9, No 4, pp.385-399, 2013
259. "Limit analysis of FGM circular plates subjected to arbitrary rotational symmetric loads using von-Mises yield criterion"
     Mostafa Baghani, Behrooz Fereidoonnezhad
     ACTA MECHANICA, Vol. 224, No 8, pp.1601-1608, 2013
260. "Gaseous slip flow forced convection through ordered microcylinders"
     Arman Sadeghi, Mostafa Baghani, Mohammad-hassan Saeedi
     MICROFLUIDICS AND NANOFLUIDICS, Vol. 15, No 1, pp.73-85, 2013
261. "A large deformation framework for shape memory polymers: Constitutive modeling and finite element implementation"
     Mostafa Baghani, Reza Naghdabadi, Jamal Arghavani
     JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 24, No 1, pp.21-32, 2012
262. "A viscoelastic constitutive model for compressible polymers based on logarithmic strain and its finite element implementation"
     Reza Naghdabadi, Mostafa Baghani, Jamal Arghavani
     Finite Elements in Analysis and Design, Vol. 62, No 62, pp.18-27, 2012
263. "A thermodynamically-consistent 3D constitutive model for shape memory polymers"
     Mostafa Baghani, Reza Naghdabadi, Jamal Arghavani, Saeed Sohrabpour
     INTERNATIONAL JOURNAL OF PLASTICITY, Vol. 35, No 35, pp.13-30, 2012
264. "Application of the variational iteration method for nonlinear free vibration of conservative oscillators"
     Mostafa Baghani, Moslem Fattahi, Ali Amjadian
     Scientia Iranica, Vol. 19, No 3, pp.513-518, 2012
265. "Analytical study on size-dependent static pull-in voltage of microcantilevers using the modified couple stress theory"
     Mostafa Baghani
     INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, Vol. 54, No 54, pp.99-105, 2012
266. "A semi-analytical study on helical springs made of shape memory polymer"
     Mostafa Baghani, Reza Naghdabadi, Jamal Arghavani, Saeed Sohrabpour
     Smart Materials and Structures, Vol. 21, No 4, 2012
267. "Strain gradient elasticity solution for functionally graded micro-cylinders"
     Hossein Sadeghi, Mostafa Baghani, Reza Naghdabadi
     Scientia Iranica, Vol. 50, No 1, pp.22-30, 2012
268. "3D Printing of Smart PETG Blends with Thermal Stimulation"
     کیاندخت میر اسدی, Davood Rahmatabadi, اسماعیل قاسمی, Majid Baniassadi, Mostafa Baghani
     Mechanical Engineering modares, Vol. 23, No 10, pp.125-130, 2023
269. "Direct and Indirect Thermal Stimulation of Processed Nanocomposites by 3D Printing"
     کیاندخت میر اسدی, Davood Rahmatabadi, اسماعیل قاسمی, Majid Baniassadi, Mostafa Baghani
     Mechanical Engineering modares, Vol. 23, No 10, pp.131-136, 2023
270. "Homogenization and heat transfer analysis of coiled carbon nanotube reinforced polyethylene nanocomposite"
     Ebrahim Yarali, Majid Baniassadi, Mostafa Baghani
     Iranian Journal of Mechanical Engineering,, Vol. 23, No 62, 2022
271. "Finite element modeling of SMA stent insertion in the vessel with consideration of vessel damage"
     Fatemeh Rouhani, Mohammad Reza Zakerzadeh, Mostafa Baghani
     Amirkabir Journal of Mechanical Engineering, Vol. 53, No 2, 2021
272. "Finite Element Modeling of a Novel Magnetic Shape Memory Alloy Based Energy Harvester Using a Corrugated Beam and Investigating the Effective Parameters"
     Omid Safari, Mohammad Reza Zakerzadeh, Mostafa Baghani
     Amirkabir Journal of Mechanical Engineering, Vol. 53, No 2, 2021
273. "A semi-analytical solution for self healing concrete beams in the frame work of continuum healing damage mechanics"
     Amin Kazemi, Mostafa Baghani, Hamid Shahsavari
     Iranian Journal of Mechanical Engineering,, Vol. 22, No 3, pp.6-29, 2020
274. "Design and Simulation of a patient specific ankle orthosis using torsional spring"
     Farshid Sadeghian, Mohammad Reza Zakerzadeh, Morad Karimpour, Mostafa Baghani
     Iranian Journal of Mechanical Engineering,, Vol. 1, No 1, 2020
275. "Investigating the behavior of temperature-responsive hydrogels by considering functionally graded properties"
     Mohammad Shojaeifard, Mostafa Baghani
     Amirkabir Journal of Mechanical Engineering, Vol. 52, No 12, pp.151-160, 2020
276. "Finite strain swelling in bilayer gels: semi-analytical and numerical approaches"
     Mohammadreza Bayat, Arash Kargar-estahbanaty, Mostafa Baghani
     Iranian Journal of Mechanical Engineering,, Vol. 22, No 1, pp.6-23, 2020
277. "Investigation of fatigue crack growth in superelastic NiTi alloy by using DIC method"
     Babak Katanchi, Naghdali Choupani, Jafar Khalil-alafi, Mostafa Baghani
     Amirkabir Journal of Mechanical Engineering, Vol. 52, No 3, pp.51-60, 2020
278. "Investigation of Viscoelastic Viscoplastic-Viscodamage Behavior of Polymers under Cyclic Loadings and Parametric Study of Their Mechanical Behavior"
     Mohammad Shojaeifard, Mostafa Baghani, Hamid Shahsavari, Roozbeh Eghbalpour
     Amirkabir Journal of Mechanical Engineering, Vol. 51, No 5, pp.967-980, 2020
279. "F I N I T E E L E M E N T M O D E L I N G O F T I R E M O V E M E N T O N A S M A R T A S P H A L T P A V E M E N T A N D I N V E S T I G A T I O N O F D A M A G E R E C O V E R Y (H E A L I N G) E F F E C T O N I T S L I F E T I M E"
     Roozbeh Eghbalpour, Mostafa Baghani, Hamid Shahsavari, Mohammad Shojaeifard, Saeid Sohrabpour
     Mechanical Engineering Sharif, Vol. 35.3, No 2, pp.33-40, 2019
280. "Study of rutting effect on the mechanical behavior of asphalt pavement under moving loads"
     Mohammad Shojaeifard, Mostafa Baghani, Hamid Shahsavari, Roozbeh Eghbalpour
     Iranian Journal of Mechanical Engineering,, Vol. 3, pp.28-53, 2019
281. "Study of healing effect on mechanical behavior of a smart asphalt pavement and permanent deformations due to a moving load"
     Roozbeh Eghbalpour, Mostafa Baghani, Hamid Shahsavari, Mohammad Shojaeifard
     Modeling in Engineering, Vol. 17, No 57, 2019
282. "Bending analysis of pH-sensitive hydrogels with functionally graded properties"
     Mohammad Shojaeifard, Mostafa Baghani
     Iranian Journal of Mechanical Engineering,, Vol. 21, No 1, 2019
283. "Design and implementation of a 2DOF human finger using shape memory alloys with computer-based online force control"
     Farzam Mirzakhani, Moosa Ayati, Pouya Fahimi, Mostafa Baghani
     Journal of Manufacturing Engineering, Vol. 5, No 4, pp.1-13, 2019
284. "Numerical analysis of growing the ductile damage in structures reinforced by SMA using continuum damage mechanics approach"
     Mostafa Baghani, Mohammad Rezaei, Seyed Mehdi Ganjiani
     Mechanical Engineering Sharif, Vol. 35-3, No 1, 2019
285. "S I M U L A T I O N A N A L Y S I S O F P O L Y M E R N A N O C O M P O S I T E S R E I N F O R C E D W I T H C A R B O N N A N O T U B E S A N D C O I L E D C A R B O N N A N O T U B E S"
     Ensieh Yousefi, Majid Baniassadi, Mostafa Mahdavi, Mostafa Baghani, Ghader Faraji
     Mechanical Engineering Sharif, Vol. 34.3, No 2, pp.95-102, 2018
286. "The Effect of Fabrication Method and Hard-phase Properties on the Thermo-viscoelastic Performance of Polyurethane-based Shape Memory Polymer Used in Medical Scaffolds"
     Mahdi Ansari, Mohammad Golzar, Mostafa Baghani, Masoud Soleimani, Mehran Abbasi-shirsavar
     Journal of Manufacturing Engineering, Vol. 5, No 3, pp.32-43, 2018
287. "A finite element analysis for shape memory polymer beams considering geometric non-linearity"
     Pouya Fahimi, Mostafa Baghani, Ghader Faraji
     Mechanical Engineering modares, Vol. -, pp.1-11, 2018
288. "Investigation on bending behavior of shape memory polymeric composite beam with a corrugated skin"
     Samira Akbari-azar, Mostafa Baghani, Hamid Shahsavari, Mohammad Reza Zakerzadeh, Saeid Sohrabpour
     Mechanical Engineering modares, Vol. 18, No 1, pp.345-354, 2018
289. "Torsional modeling and experimental characterization of a shape memory alloy rod using Brinson’s asymmetric model"
     Pouya Fahimi, Mostafa Baghani, Mohammad Reza Zakerzadeh
     Mechanical Engineering modares, Vol. 17, No 12, pp.469-477, 2017
290. "A finite element analysis for shape memory polymer Timoshenko beams"
     Amirhossein Eskandari, Mostafa Baghani, Majid Baniassadi
     Mechanical Engineering modares, Vol. 17, No 8, pp.351-359, 2017
291. "Design and Simulation of a knee-ankle-foot orthosis using torsional spring"
     Farshid Sadeghian, Morad Karimpour, Mohammad Reza Zakerzadeh, Mostafa Baghani
     Mechanical Engineering modares, Vol. 17, No 10, pp.185-193, 2017
292. "Adjusting shape memory and pseudoelastic properties with thermal recovery in NiTi/NiTiCu bi-layer composite aided by FEM simulation"
     Milad Taghizadeh, Mahmoud Nili Ahmadabadi, Mostafa Baghani, Mohammad Hassan Malekoshoaraei, Mohammad Habibi Parsa
     metallurgy and materials engineering, Vol. 20, No 3, pp.148-161, 2017
293. "A N I N V E S T I G A T I O N O N T H E E F F E C T O F G R A P H E N E N A N O-P L A T E O N P E R F O R M A N C E O F A S H A P E-M E M O R Y-P O L Y M E R B A S E D N A N O C O M P O S I T E"
     Mostafa Baghani, Majid Baniassadi
     Sharif Journal Civil Engineering, Vol. 3-33, No 1, pp.137-145, 2017
294. "3D Reconstruction of Carbon Nanotube Composite Using Statistical Correlation Functions"
     Mostafa Mahdavi, Majid Baniassadi, Mostafa Baghani
     Journal of solid and fluid mechanis, Vol. 6, No 3, pp.33-42, 2016
295. "Bending analysis of a new deformable sandwich structure"
     Mohammad Reza Zakerzadeh, Hamid Salehi, Abolfazl Salehi, Mostafa Baghani
     Mechanical Engineering modares, Vol. 16, No 2, pp.1-11, 2016
296. "Modeling the spall in impact of metalic plates, considering the effects of temperature, strain rate and damage"
     Mostafa Baghani, Mohammad Reza Zakerzadeh, Majid Baniassadi
     Journal of solid and fluid mechanis, Vol. 5, No 3, pp.39-50, 2015

Conference Paper

1. "Data-Driven modeling of an elastomer bushing system in various visco-hyperelastic deformations"
   AmirMohammad Daareyni, Mostafa Baghani
   30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
2. "Experimental investigation on 4D printing of PET-G"
   Elyas Soleyman, Davood Rahmatabadi, Majid Baniassadi, Mostafa Baghani
   30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
3. "Effect of printing parameters on the shape transformation of 3D printed PETG"
   Elyas Soleyman, D.. Rahmat Abadi, Majid Baniassadi, Mostafa Baghani
   30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
4. "Modeling Particle Movement and Transient Adsorption Behavior with Cellular Automata"
   Omid Ziaee, Mostafa Baghani, Majid Baniassadi
   30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
5. "Vincristine Loaded Silk Fibroin Hydrogel for Sustained Drug Delivery"
   Ziba Gharehnazifam, Majid Baniassadi, Mostafa Baghani
   30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
6. "An investigation into the mechanical properties of polymer composite reinforced by coiled carbon nanotubes"
   Parmida Fareghi, Taraneh Karbaschi, Ali Sharifian, Ali Rajabpour, Mostafa Baghani, Majid Baniassadi
   Fourth International Conference on Interdisciplinary Studies in Nanotechnology, 2022
7. "A generalized mobile automaton for simulating particle deposition on a wall: effect of movement rules and wall shape"
   Omid Ziaee, Majid Baniassadi, Naeem Zolfaghari, Mostafa Baghani
   International Conference on Innovation and Research in Engineering Sciences (ICIRES), 2021
8. "An investigation into the impression of geometrical parameters of multi-wall coiled carbon nanotubes’ constructing components on their mechanical deformation using molecular dynamics simulation"
   Parmida Fareghi, Taraneh Karbaschi, Ali Sharifian, Mostafa Baghani, Majid Baniassadi
   2nd International Conference on Nanotechnology & Nanoscience, 2021
9. "Numerical Simulation of Osteoporosis Degradation at Local Scale: A Preliminary Study on the Kinematic Loss of Mechanical Bone Stiffness and Microstructure"
   Morteza Kazempour, AmirHossein Bagherian Rekavandi, Azadeh Sheidaei, Majid Baniassadi, Mostafa Baghani, Yve Remond, Daniel George
   IOS Press, Biomedical and Health Research, Stem Cells and Regenerative Medicine, 2019
10. "3D micromechanical homogenization of brain tissue considering random neuronal distribution within the extracellular matrix"
    Hamid Shahsavari, Hossein Jokar, Mostafa Baghani, Maryam Mazraeh Ei Farahani, Daniel George, Yve Remond, Majid Baniassadi
    EUROMECH-Colloquium 579 in Arpino (FR), Italy, 2019
11. "Stress concentration and shape memory effect in rectangular plates with circular holes made of shape memory polymer"
    Mehdi Baniasadi, Mostafa Baghani
    First Conference on Mechanical Behavior Modeling of Materials, 2018
12. "Numerical study of helical extension springs made of shape memory polymer based foams"
    Mehdi Baniasadi, Mostafa Baghani
    First Conference on Mechanical Behavior Modeling of Materials, 2018
13. "Proposing a visco-hyperelastic constitutive model for time-dependent behavior of gluten in large deformations and the corresponding nonlinear finite element framework"
    Shayan Fahimi, Mostafa Baghani, Mohammad Reza Zakerzadeh
    2nd International Conference on Mechanical & Aerospace Engineering, 2017
14. "Design a model-based shape memory alloy wire controller in order to force control a two degrees of freedom hand finger"
    Farzam Mirzakhani, Moosa Ayati, Mostafa Baghani
    The 25th Annual International Conference on Mechanical Engineering, ISME2017, 2017
15. "Fabrication of smart self-expanding biocompatible stents in body temperature"
    Mehran Abbasi-shirsavar, Mohammad Golzar, Mostafa Baghani, Mehrnoosh Taghavimehr
    5th International Society for Evidence-Based Healthcare Congress, Kish Island, 2016
16. "Finite element analysis of finite bending of temperature response hydrogel bilayers"
    Jalal Abdolahi, Mostafa Baghani, Hashem Mazaheri
    International conference on new research findings of Sciences, Engineering and technology, 2016
17. "Large deformation induced bending of a thermally activated hydrogel layered beam: a finite element analysis"
    Jalal Abdolahi, Mostafa Baghani, Hashem Mazaheri
    International conference on new research findings of Sciences, Engineering and technology, 2016
18. "Ph sensitive hydrogels as microfluidic valves: a fluid structure interaction (FSI) study"
    Nasser Arbabi, Mostafa Baghani, Mahmoud Mousavi Mashhadi
    International conference of advances on mechanical engineering, 2016
19. "Experimental study of shape memory effect in PU-PCL nanocomposites"
    Mehran Abbasi-shirsavar, Mohammad Golzar, Mostafa Baghani, Mehrnoosh Taghavimehr
    Proceedings of the 6th International Conference on Nanostructures (ICNS6), 2016
20. "Experimental Study of Polyurethane/Polycaprolactone (PU/PCL)"
    Mehran Abbasi-shirsavar, Mohammad Golzar, Mostafa Baghani, Mehdi Ansari, Mehrnoosh Taghavimehr, Ali Tavakoli
    The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), 2016
21. "Experimental and Numerical Evaluation of Polyurethane/Polycaprolactone (PU/PCL) strip Shape Memory Effect"
    Mehdi Ansari, Mohammad Golzar, Masood Solimani, Mehran Abbasi-shirsavar, Mostafa Baghani, Mohammad Nikzad-jamnani, Ali Tavakoli
    The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), 2016
22. "Simulation of shape memory polymer stent using FEM"
    Mehran Abbasi-shirsavar, Mohammad Golzar, Mostafa Baghani
    The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), 2014
23. "Introducing the thermomechanical multi-purpose tensile testing device with the ability to control the temperature rate"
    Elyas Soleyman, [] [], Majid Baniassadi, Mostafa Baghani
    30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
24. "On the effect of damage in asphalt considering rate-dependent properties under moving load"
    Mohammad Shojaeifard, Mostafa Baghani, Hamid Shahsavari
    First Conference on Mechanical Behavior Modeling of Materials, 2018
25. "Investigating the Nonlinear and Chaotic Behavior of an SMA Actuated Oscillator"
    Shaqayeq Yahyaei, Mohammad Reza Zakerzadeh, َArash Bahrami, Mostafa Baghani
    7th International Conference on Acoustics and Vibration (ISAV2017), 2017
26. "Thermomechanical response of self-healing polymers under different cyclic loading and a parametric study on damage and healing parameters"
    Roozbeh Eghbalpour, Mostafa Baghani, Hamid Shahsavari, Mohammad Shojaeifard
    25th Anuual International Conference on Mechanical Engineering, 2017
27. "Nonlinear Finite element modeling of asphalt considering viscoelatic viscoplastic under moving load and a parametric study"
    Mohammad Shojaeifard, Mostafa Baghani, Hamid Shahsavari, Roozbeh Eghbalpour
    25th Anuual International Conference on Mechanical Engineering, 2017
28. "25th Annual International Mechanical Engineering Conference"
    Ali Nassiri-monfared, Mostafa Baghani, Pouya Fahimi
    25th Anuual International Conference on Mechanical Engineering, 2017