Journal Paper

1. "The effect of process parameters on the residual stress in friction surface cladding"
   Kamal Naserinejad, Abolfazl Masoumi, T. C. Bor, Mahmoud Mousavi Mashhadi
   Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 46, 2024
2. "A Review of Additive Manufacturing Effects on Architecture and Construction Industries"
   Shahryar Masoumi, Abolfazl Masoumi
   International Journal on Engineering Applications, Vol. 12, No 1, 2024
3. "Multi-objective crashworthiness optimization for a newly developed 3D re-entrant auxetic structure using response surface method and MOPSO algorithm"
   Majid Lotfi, Abolfazl Masoumi
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, Vol. -, 2024
4. "Processing of different Mg-based multiphase alloys via a combined severe plastic deformation"
   Seyed hamidreza Torabi, Seyyed Mohammad Hosseini, Armin Siahsarani, Ahmad Najafi, Abolfazl Masoumi, Ghader Faraji
   MATERIALS SCIENCE AND TECHNOLOGY, Vol. 1, No 1, 2024
5. "Numerical and Experimental Investigation of Residual Stress and Bond Strength in Friction Surface Cladding Process"
   Kamal Naserinejad, Abolfazl Masoumi, T. C. Bor, Mahmoud Mousavi Mashhadi
   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. -, 2023
6. "Experimental and numerical analysis of a novel 3D re-entrant auxetic structure"
   Majid Lotfi, Abolfazl Masoumi
   Proceedings of the Institution of Mechanical Engineers. Part D, Transport engineering, Vol. -, 2022
7. "Investigation of the microstructure and thermo-mechanical properties of functionally graded materials fabricated by the vibrating centrifugal solid particle method"
   Ali Hajisadeghian, Abolfazl Masoumi, Ali Parvizi
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. -, 2021
8. "Analytical investigation of elastic and plastic behavior of rotating double-walled FGM-homogenous hollow shafts"
   Ali Hajisadeghian, Abolfazl Masoumi, Ali Parvizi
   ARCHIVE OF APPLIED MECHANICS, Vol. -, 2020
9. "A study of rock ladder structure used in buffer storage of iron ore pellets: DEM simulation and analytical model"
   Abdol-Hossein Madadi Najafabadi, Abolfazl Masoumi
   World Journal of Engineering, Vol. 17, No 5, pp.633-640, 2020
10. "Processing and characterization of binary Mg-Zn alloys fabricated by a new powder consolidation combined severe plastic deformation method"
    HAMIDREZA TORABI, Ghader Faraji, Abolfazl Masoumi
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 832, No 832, 2020
11. "A New Conceptual Model for Vehicle Subframe to Evaluate Dynamic Performance of Structures at Conceptual Design Stage"
    Sasan Azaripour, Abolfazl Masoumi
    International Journal of Automotive And Mechanical Engineering, Vol. 16, No 4, 2019
12. "Integration of in-plane and out-of-plane dimensional variation in multi-station assembly process for automotive body assembly"
    Vahid Jandaghi Shahi, Abolfazl Masoumi
    Proceedings of the Institution of Mechanical Engineers. Part D, Transport engineering, Vol. 234, No 6, pp.1690-1702, 2019
13. "A new approach for consolidation of pure magnesium powder using an integrated severe plastic deformation route"
    Hr. Torabi, F.. Samadpour, Ghader Faraji, Abolfazl Masoumi
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 1, No 1, 2019
14. "A quality-driven assembly sequence planning and line configuration selection for non-ideal compliant structures assemblies"
    Vahid Jandaghi Shahi, Abolfazl Masoumi, Pasquale Franciosa, Dariusz Ceglarek
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. -, 2019
15. "Microstructure, mechanical properties and bio-corrosion properties of Mg-HA bionanocomposites fabricated by a novel severe plastic deformation process"
    Hr. Torabi, Seyed Mohammad Hosseini, Mohammadreza Sadrkhah, Ghader Faraji, Abolfazl Masoumi
    CERAMICS INTERNATIONAL, Vol. 1, No 1, 2019
16. "Optimal design of steppers in single step high pressure torsion (SIHPT) process as a novel SPD method"
    M.. Eskandarzadeh, Ghader Faraji, Abolfazl Masoumi, Ali Kalaki
    International Journal Of Advanced Design And Manufacturing Technology, Vol. 1, No 2, 2019
17. "Prediction model to estimate the specific energy and product particle size distribution of semi-autogenous mill"
    Mohammad Razani, Abolfazl Masoumi, Masoud Rezaeizadeh, Mohammad Noaparast
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. -, 2018
18. "Analysis of abrasive damage of iron ore pellets"
    Hossein Madadi, Abolfazl Masoumi, Seyed Mehdi Vaez Allaei
    POWDER TECHNOLOGY, Vol. 331, pp.20-27, 2018
19. "Fixture layout optimization in multi-station sheet metal assembly considering assembly sequence and datum scheme"
    Vahid Jandaghi Shahi, Abolfazl Masoumi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 95, pp.4629-4643, 2018
20. "Investigating the magnetic field effects on thermomechanical stress behavior of thick-walled cylinder with inner FGM layer"
    Ali Hajisadeghian, Abolfazl Masoumi, Ali Parvizi
    JOURNAL OF THERMAL STRESSES, Vol. -, pp.1-16, 2017
21. "Investigation and optimization for the dynamical behaviour of the vehicle structure"
    Omid Zargar, Abolfazl Masoumi, Amir Ostadi Moghaddam
    International Journal of Automotive And Mechanical Engineering, Vol. 14, No 2, pp.4196-4210, 2017
22. "Evaluating the Effect of Feed Particles Size and Their Hardness on the Particle Size Distribution of Semi-Autogenous (SAG) Mill’s Product"
    Mohammad Razani, Abolfazl Masoumi, Masoud Rezaeizadeh, Mohammad Noaparast
    PARTICULATE SCIENCE AND TECHNOLOGY, Vol. -, 2017
23. "A new designed incremental high pressure torsion process for producing long nanostructured rod samples"
    M.. Eskandarzadeh, Abolfazl Masoumi, Ghader Faraji, Mahdi Mohammadpour, Xinjie Sabrina Yan
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 695, No 695, 2016
24. "Numerical and analytical investigation of an ultrasonic assisted ECAP process"
    M.. Eskandarzadeh, Abolfazl Masoumi, Ghader Faraji
    Journal of Theoretical and Applied Vibration and Acoustics, Vol. 2, No 2, 2016
25. "Experimental analysis of bonding strength in shape rolling of Al-Cu bimetallic circular pipes into square tubes"
    Ali Tajyar, Abolfazl Masoumi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. -, pp.1-12, 2016
26. "Investigation of Mechanical properties of bimetallic Square Tubes produced by Shape Rolling of Al/Cu Circular Pipes"
    Ali Tajyar, Abolfazl Masoumi
    Journal of Mechanical Science and Technology, Vol. 30, No 9, pp.4299-4306, 2016
27. "Experimental investigation on material flow and mechanical properties in friction stir welding of copper sheets"
    Hamed Pashazadeh, Jamal Teimournezhad, Abolfazl Masoumi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 88, pp.1961-1970, 2016
28. "Effect of shoulder plunge depth on the weld morphology, macrograph and microstructure of copper FSW joints"
    Jamal Teimournezhad, Hamed Pashazadeh, Abolfazl Masoumi
    Journal of Manufacturing Processes, Vol. 22, No 22, pp.254-259, 2016
29. "Influences of pin profile on the macrostructure and mechanical properties of friction stir welded AA6061-T6 alloy T-joints"
    Majid Alamdari, Mehdi Saeidi, Babak Manafi, Abolfazl Masoumi, Kavan Ghowsi
    Materials Testing, Vol. 57, pp.992-996, 2015
30. "Numerical investigation of strain distribution during cyclic expansion extrusion (CEE)"
    Hamid Torabi, Mohammad Mahdi Samandari, Ghader Faraji, Abolfazl Masoumi
    Journal of Advanced Materials and Processing, Vol. 3, No 3, 2015
31. "Weld defect formation in FSWed coppers"
    Yousof Gheisari, Hamed Pashazadeh, Jamal Teimournezhad, Abolfazl Masoumi
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 23, No 6, pp.2000-2006, 2014
32. "A simulation-based approach to the determination of forming limit diagrams"
    Ramin Hashemi, Hossein Mamusi, Abolfazl Masoumi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 228, No 12, pp.1582-1591, 2014
33. "A study on material flow pattern in friction stir welding using finite element method"
    Hamed Pashazadeh, Abolfazl Masoumi, Jamal Teimournezhad
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 227, No 10, pp.1453-1466, 2013
34. "Numerical investigation on the mechanical, thermal, metallurgical and material flow characteristics in friction stir welding of copper sheets with experimental verification"
    حامد پاشازاده, Jamal Teimournezhad, Abolfazl Masoumi
    MATERIALS & DESIGN, Vol. 2014, No 55, pp.619-632, 2013
35. "Numerical modelling for the hardness evaluation of friction stir welded copper metals"
    Hamed Pashazadeh, Abolfazl Masoumi, Jamal Teimournezhad
    MATERIALS & DESIGN, Vol. 49, No 49, pp.913-921, 2013
36. "A Novel Approach to the Determination of Forming Limit Diagrams for Tailor-Welded Blanks"
    Hossein Mamusi, Abolfazl Masoumi, Ramezan Ali Mahdavi Nezhad
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. -, 2013
37. "A 3D Numerical Model to Investigate Mechanical Thermal and Material Flow Characteristics in Friction Stir Welding of Copper Sheets"
    Hamed Pashazadeh, Abolfazl Masoumi, Jamal Teimournezhad
    Automotive Science and Engineering, Vol. 3, No 1, pp.328-342, 2013
38. "EXPERIMENTAL AND NUMERICAL INVESTIGATION INTO THE QUASI - STATIC CRUSHING BEHAVIOUR OF THE S - SHAPE SQUARE TUBES"
    A Khalkhali , Abolfazl Masoumi, A Darvizeh , M Jafari , A Shiri
    JOURNAL OF MECHANICS, Vol. 27, No 4, pp.585-596, 2011
39. "Comparison of steel aluminum and composite bonnet in terms of pedestrian head impact"
    Abolfazl Masoumi, Mohammad Hasan Shojaee Fard , Amir Najibi
    SAFETY SCIENCE, Vol. 49, No 10, pp.1371-1380, 2011
40. "Experimental Investigation of Magnesium - Base Nanocomposite Produced by Friction Stir Processing : Effects of Particle Types and Number of Friction Stir Processing Passes"
    Mohammad Kazem Besharati Givi, Abolfazl Masoumi, Parviz Asadi , Aboalfazl Masoumi
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 42, No 9, pp.2820-2832, 2011
41. "Reliability - based robust multi - objective crashworthiness optimisation of S - shaped box beams with parametric uncertainties"
    B Notghi , Abolfazl Masoumi, Nader Nariman Zadeh , Abolfazal Khakhali
    INTERNATIONAL JOURNAL OF CRASHWORTHINESS, Vol. 15, No 4, pp.456-443, 2010
42. "Robust Design of S - Shaped Box Beams Subjected to Compressive Load"
    Abolfazl Khalkhali , Abolfazl Darvizeh , Abolfazl Masoumi, Nader Nariman Zadeh , Azim Shiri
    MATHEMATICAL PROBLEMS IN ENGINEERING, Vol. 2010, 2010
43. "Experimental investigation of onion ring structure formation in friction stir butt welds of copper plates produced by non - threaded tool pin"
    Jamal Teimournezhad, Abolfazl Masoumi
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, Vol. 15, No 2, pp.166-170, 2009
44. "Buckling analysis of circular functionally graded material plate having variable thickness under uniform compression by finite - element method"
    Mohammad Hasan Naei, Abolfazl Masoumi, A Shamekhi
    Journal of Mechanical Engineering Science, Vol. 2007, No 221, pp.1241-1247, 2007
45. "Influence of Interface Morphology on The Bond Strength During The Reshaping Process of Al-Cu Bimetal Pipes"
    Ali Tajyar, Abolfazl Masoumi
    Amirkabir Journal of Mechanical Engineering, Vol. 50, No 3, pp.467-478, 2018
46. "Experimental and numerical investigation of liner profile impacts on comminution performance of SAG mill in Sarcheshmeh Copper Complex"
    Mohammad Razani, Abolfazl Masoumi, Masoud Rezaeizadeh, Mohammad Noaparast
    Mechanical Engineering modares, Vol. 16, No 7, 2016
47. "A concept model for the dynamical analysis of vehicle wheelhouse in the early stage of design"
    Omid Zargar, Abolfazl Masoumi, Mphammad Reza Ashouri
    Mechanical Engineering modares, Vol. 15, No 12, pp.279-286, 2015
48. "Experimental investigation of heat treatment and deformation rate effects on aluminum-steel bonding in cold spin-bonding process"
    Siyavash Alibabaei, Abolfazl Masoumi
    Mechanical Engineering modares, Vol. 15, No 5, pp.356-350, 2015
49. "طراحی بهینه جعبه دنده خودرو بر اساس شاخصهای عملکرد و مصرف سوخت"
    Abolfazl Masoumi, Masoud Shariat Panahi, علیرضا معتمدی
    University, Vol. 40, No 6, pp.880-871, 2006
50. "شبیه سازی و تحلیل کشش عمیق TWB"
    Abolfazl Masoumi, Karen Abrinia, مسعود تائبی
    University, Vol. 39, No 1, pp.73-82, 2005

Conference Paper

1. "Designing a passive orthosis to restrict the tremor in the upper limbs using rotary dampers"
   Hossein Korani, Mohammad Ali Nazari, Abolfazl Masoumi
   The 30th national 8th international Iranian Conference of Biomedical Engineerinh, 2023
2. "Quality-driven Optimization of Assembly Line Configuration for Multi-Station Assembly Systems with Compliant Non-ideal Sheet Metal Parts"
   Vahid Jandaghi Shahi, Abolfazl Masoumi, Pasquale Franciosa, Darek Ceglarek
   15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 2018
3. "A novel strategy to speed up FE modeling of Ultrasonic Assisted ECAP Process"
   M.. Eskandarzadeh, Abolfazl Masoumi, Ghader Faraji
   The Biennial International Conference on Experimental Solid Mechanics, 2016
4. "Experimental Modeling of friction coefficient values at different contact pressures"
   M.. Eskandarzadeh, Ghader Faraji, Abolfazl Masoumi
   The Biennial International Conference on Experimental Solid Mechanics, 2016
5. "A new laboratory model to determine the grindability SAG mill feed of Sarcheshmeh Copper Complex"
   Mohammad Razani, Abolfazl Masoumi, Masoud Rezaeizadeh
   The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), 2016
6. "Investigation of lifter profile impacts on grindability of SAG mill feed in Sarcheshmeh Copper Complex using experimental and numerical methods"
   Mohammad Razani, Abolfazl Masoumi, Masoud Rezaeizadeh
   International Research Conference on Research in Science and Technology, 2015
7. "FINITE ELEMENT SIMULATION OF MATERIAL FLOW IN FRICTION STIR WELDING OF COPPER"
   Hamad Pashazadeh , Abolfazl Masoumi, Jamal Teimournezhad
   13TH MIDDLE EASTERN SIMULATION MODELLING MULTICONFERENCE-MESM2012-EUROSIS-ETI (DECEMBER 10-12 2012 Muscat Oman., 2012
8. "Numerical Simulation for the Formability Prediction of the Laser Welded Blanks (TWB"
   Hossein Mamusi , Abolfazl Masoumi, Ramezan Ali Mahdavi Nezhad
   ICAMAME 2012 : International Conference on Aerospace Mechanical Automotive and Materials Engineering, 2012
9. "On the Formation of Onion-Ring Structure in Friction Stir Butt Welds of Copper Plates Produced by Non-Threaded Tool Pin"
   Abolfazl Masoumi, Jamal Teimournezhad
   International congress on Welding and Joining (IIWC2009), 2009
10. "Experimental and numerical investigation of dimensional variation in single-station assembly of deformable parts"
    وحید جندقی, Abolfazl Masoumi
    The First National Conference of Industrial Technologies in Mechanical Engineering, 2021
11. "Introducing multi-tube thin-wall structures for crashworthiness by optimization of geometrical characteristics"
    dhfsdr hnfgyuy, Abolfazl Masoumi, Masoud Shariat Panahi
    26th Annual International Conference of Iranian Society of Mechanical Engineers, 2018
12. "Investigation of process parameters on dimensions of final product in reshaping of bimetallic circular pipes"
    Ali Tajyar, Abolfazl Masoumi, Gholamhossein Liaghat
    ICME2016, 2016
13. "Effect of various parameters on energy and separating force in forming of Bimetallic Circular Pipes into Square Tubes"
    Ali Tajyar, Abolfazl Masoumi, Gholamhossein Liaghat
    ICME2016, 2016
14. "Experimental Investigation of the Effect of Ball and Mill Diameter on the Comminution Performance and Product Size Distribution in SAG Mills of Sarcheshmeh Copper Complex"
    Mohammad Razani, Abolfazl Masoumi, Masoud Rezaeizadeh, Mohammad Noaparast
    4th International Mine & Mining Industries Congress & 6th Iranian Mining Engineering Conference, 2016
15. "Investigation of drop weight shape on comminution performance of SAG mill"
    Mohammad Razani, Abolfazl Masoumi, Masoumi Rezaeizadeh
    ISME2016, 2016