Journal Paper

1. "Mechanical, physical, and degradation properties of 3D printed PLA + Mg composites"
   Milad Zeynivandnejad, Mohsen Moradi, Alireza Sadeghi
   Journal of Manufacturing Processes, Vol. 101, No 1, pp.234-244, 2023
2. "FORMATION OF MOLTEN SN AND SN-PB DROPLETS IN MAGNETOHYDRODYNAMIC PUMPS"
   فرید باقرپور, Alireza Sadeghi, Kambiz Ghaemi Osgouie
   The Saybold Report Journal, Vol. 18, No 5, 2023
3. "Microstructural, mechanical, texture and corrosion properties of severely deformed AZ31 Alloy with Sr addition"
   Mohammadreza Sadrkhah, Milad Aali Majid Abad, MOHSEN MESBAH, Alireza Sadeghi, Ghader Faraji
   JOM, Vol. 1, No 1, 2023
4. "Stoichiometry and Texture Evolution of Individual Layers during Accumulative Roll Bonding of Al-Mg Laminated Composites"
   Zohreh Sarvi, Alireza Sadeghi, Mahmoud Mousavi Mashhadi
   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 1, No 1, 2022
5. "Effect of Accumulative Roll Bonding (ARB) strain path on microstructural evolution and crystallographic texture development in aluminium"
   Zohreh Sarvi, Alireza Sadeghi, Mahmoud Mousavi Mashhadi, Baoqi Guo
   Journal of Materials Research and Technology-JMR&T, Vol. 21, No 1, pp.1061-1071, 2022
6. "Effect of grain size on fracture behavior of pure magnesium sheet: An in-situ study combined with grain-scale DIC analysis"
   Snia Nazari-Onlaghi, Alireza Sadeghi, Morad Karimpour
   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 832, No 1, 2022
7. "In vitro corrosion study of PLA/Mg composites for cardiovascular stent applications"
   AHSAN HASANPOR, اکبر قضاوی زاده , Alireza Sadeghi, Mohamed Habousi
   Journal of the Mechanical Behavior of Biomedical Materials, Vol. 124, No 1, 2021
8. "Liquid metal corrosion resistant LaPO4 coating with metallophobic characteristics fabricated on 316 stainless steel using electrophoretic deposition technique"
   Mohammad Amin Ahmadzadeh, Alireza Sadeghi, Seyed Farshid Chini
   CERAMICS INTERNATIONAL, Vol. 1, No 1, 2021
9. "Mg17Al12 intermetallic modified with Yttrium additions"
   konstantinos Korgiopoulos, Alireza Sadeghi, Mihriban Pekguleryuz
   INTERMETALLICS, Vol. 138, No 1, 2021
10. "Corrosion properties and surface free energy of the Zn-Al LDH/rGO coating on MAO pretreated AZ31 magnesium alloy"
    Vahdat Zahedi, Seyed Farshid Chini, Jingmao Zhao, Yahya Palizdar, Alireza Sadeghi
    SURFACE & COATINGS TECHNOLOGY, Vol. 1, No 1, 2021
11. "Electroless Plating of Sn/Cu/Zn Triple Layer on AA6082 Aluminum Alloy"
    [] [], Babak Gerami Shirazi, Alireza Sadeghi, Shahram Seidi
    International Journal of Lightweight Materials and Manufacture, Vol. 1, No 1, 2021
12. "Fracture micro-mechanisms in hot-rolled AZ31 and AZ31-Sr magnesium alloys"
    Snia Nazari-Onlaghi, Alireza Sadeghi, Morad Karimpour, Mihriban Pekguleryuz
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 812, No 1, 2021
13. "Design and manufacture of a micro-tensile testing machine for in situ optical observation and DIC analysis: application to 3D-printed and compression-molded ABS"
    Snia Nazari-Onlaghi, Alireza Sadeghi, Morad Karimpour
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, Vol. 1, No 1, 2021
14. "Transient liquid phase bonding of Cu and Al using metallic particles interlayers"
    Alireza Zaheri, Mohammadreza Farahani, Alireza Sadeghi, Naser Souri
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 20, No 1, 2021
15. "Investigation of simultaneous effect of a magnetic field and electric current on conductor fluid (Salt water) for making a magnetic pump"
    Vahid Rezaei, Alireza Sadeghi, Seyed Peyman Hashemi, Mohammad Hossein Sadeghi
    Materials Today, Vol. 1, No 1, 2020
16. "The effect of decarburisation on creep deformation: application to magnesium reduction steel retort tubes"
    Mohammad Barani, Snia Nazari-Onlaghi, Alireza Sadeghi
    MATERIALS AT HIGH TEMPERATURES, Vol. 1, No 1, pp.1-10, 2020
17. "4D X-ray tomography characterization of void nucleation and growth during deformation of strontium-added AZ31 alloys"
    Javad Samei, Alireza Sadeghi, Hossein Mortezapour, saeid salavati, maedeh Amirmaleki, Mihriban Pekguleryuz, David Wilkinson
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 797, No 1, 2020
18. "Thermodynamic simulation and damage analysis of magnesium production retort tubes"
    Majid Maarefvand, Alireza Sadeghi, Snia Nazari-Onlaghi
    ENGINEERING FAILURE ANALYSIS, Vol. 1, No 1, 2020
19. "Improving service life of magnesium reduction steel retorts against creep collapse by structural modification"
    Majid Shah heidari, Snia Nazari-Onlaghi, Alireza Sadeghi, Mohammad Hosein Sadeghi
    ENGINEERING FAILURE ANALYSIS, Vol. 113, No 1, 2020
20. "Redesigning and non-linear parametric and free-size optimization of an Mg alloy automotive seat frame"
    Hamed Rahmanian, Alireza Sadeghi, Ali Asghar Atai
    Automotive Science and Engineering, Vol. 10, No 1, 2020
21. "High-Temperature Oxidation of Inner and Outer Surfaces of Magnesium Production Steel Retort Tubes"
    Alireza Sadeghi, Majid Maarefvand, Snia Nazari-Onlaghi
    ENGINEERING FAILURE ANALYSIS, Vol. 1, No 1, 2020
22. "Investigation of large strain extrusion machining (LSEM) of pure magnesium (Mg)"
    Sajad Molafilabi, Alireza Sadeghi, Mohamadjafar Hadad
    International Journal of Lightweight Materials and Manufacture, Vol. 1, No 1, 2019
23. "Three-dimensional modeling of creep deformation in magnesium reduction retorts"
    Majid Shah heidari, Alireza Sadeghi, Mohammad Hossein Sadeghi
    ENGINEERING FAILURE ANALYSIS, Vol. 1, No 1, 2019
24. "Size and shape tailored sol-gel synthesis and characterization of lanthanum phosphate (LaPO4) nanoparticles"
    Mohammad Amin Ahmadzadeh, Seyed Farshid Chini, Alireza Sadeghi
    MATERIALS & DESIGN, Vol. 1, No 1, 2019
25. "Anisotropy of mechanical properties and crystallographic texture in hot rolled AZ31+XSr sheets"
    Alireza Sadeghi, Hossein Mortezapour, Javad Samei, Mihriban Pekguleryuz, David Wilkinson, Javad Samei
    Journal of Magnesium and Alloys, Vol. 1, No 1, 2019
26. "Microstructure and properties of transient liquid phase bonding of AM60 Mg alloy to 304 stainless steel with Zn interlayer"
    Milad Mehrzad, Alireza Sadeghi, Mohammadreza Farahani
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 266, pp.558-568, 2019
27. "Slip band formation at free surface of lath martensite in low carbon steel"
    Junya Inoue, Alireza Sadeghi, Toshihiko Koseki
    ACTA MATERIALIA, Vol. 165, pp.129-141, 2019
28. "High temperature creep failure in magnesium reduction retorts"
    Majid Shah Heidari, Alireza Sadeghi, Mohammad Hossein Sadeghi
    ENGINEERING FAILURE ANALYSIS, Vol. 94, No 1, pp.438-446, 2018
29. "Corrosion behaviour of AZ31 magnesium alloy containing various levels of strontium"
    Alireza Sadeghi, Ehsan Hasanpur, Ahmad Bahmani, Kwang Seon Shin
    CORROSION SCIENCE, Vol. 141, No 1, pp.117-126, 2018
30. "Microstructure and Mechanical Properties of CP-Titanium Processed by ECAP Followed by Warm Caliber Rolling"
    Parham Rostami, Ghader Faraji, Alireza Sadeghi, Mostafa Baghani
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 11, No 11, 2018
31. "Thermomechanical modeling of friction stir welding in a Cu-DSS dissimilar joint"
    Vahid Shokri, Alireza Sadeghi, Mohammad Hossein Sadeghi
    Journal of Manufacturing Processes, Vol. 31, No 1, pp.46-55, 2018
32. "Effect of initial texture and microstructure of Mg on mechanical properties of Mg – Stainless steel laminated metal composites"
    Alireza Sadeghi, Nobuhiko Kyokuta, Junya Inoue, Toshihiko Koseki
    MATERIALS CHARACTERIZATION, Vol. 127, pp.171-178, 2017
33. "Multilayer Mg–Stainless Steel Sheets, Twinning and Texture Evolution"
    Junya Inoue, Alireza Sadeghi, Toshinori Ohmori, Toshihiko Koseki
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 1, No 1, 2017
34. "Effect of Friction Stir Welding Parameters on Microstructure and Mechanical Properties of DSS–Cu Joints"
    Vahid Shokri, Alireza Sadeghi, Mohammad Hossein Sadeghi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 1, No 693, pp.111-120, 2017
35. "Multilayer Mg: Stainless Steel Sheets, Microstructure, and Mechanical Properties"
    Junya Inoue, Alireza Sadeghi, Nobuhiko Kyokuta, Toshihiko Koseki, Toshinori Ohmori
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 1, No 1, pp.1-13, 2017
36. "In situ deformation analysis of Mg in multilayer Mg-steel structures"
    Alireza Sadeghi, Junya Inoue, Nobuhiko Kyokuta, Toshihiko Koseki
    MATERIALS & DESIGN, Vol. 119, No 1, pp.236-337, 2017
37. "Texture Evolution and Twinning During the Expansion of Hot Extruded AZ31 + Sr Seamless Tubes"
    Alireza Sadeghi, Etienne Martin, Mihriban Pekguleryuz
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 45, No 13, pp.6304-6316, 2014
38. "Damping and dynamic recovery in magnesium alloys containing strontium"
    Alireza Sadeghi, کاوان هازلی, Mihriban Pekguleryuz, Antonios Kontsos
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 589, pp.275-279, 2014
39. "The effect of strontium in plasticity of magnesium alloys"
    Alireza Sadeghi, Mihriban Pekguleryuz, Kavan Hazeli, Antonios Kontsos
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 578, pp.383-393, 2013
40. "Experimental and Numerical Analysis of Discontinuous Flow of Molten Sn in an Electromagnetic Pump and Investigation of Effective Parameters on Flow Geometry"
    فرید باقرپور, Alireza Sadeghi, Kambiz Ghaemi Osgouie
    Mechanical Engineering modares, Vol. 22, No 12, pp.727-736, 2022
41. "Effect of 3D-printing and compression molding on anisotropy of ABS micro specimen: A comparative study based on DIC"
    Snia Nazari-Onlaghi, Alireza Sadeghi, Morad Karimpour, هادی محمدی
    Amirkabir Journal of Mechanical Engineering, Vol. 1, No 1, 2021
42. "A Review of Magnesium Industry in Iran – Opportunities and Threats"
    Alireza Sadeghi, Sahel Mohammadi
    metallurgy and materials engineering, Vol. 22, No 2, 2019

Conference Paper

1. "Mechanical Anisotropy of Hot Extruded AZ31-Sr Alloys"
   Alireza Sadeghi, Hemant Borkar, Mihriban Pekguleryuz
   The 10th International Conference on Magnesium Alloys and Their Applications, 2015
2. "Twining behavior of Mg in Multilayer Mg / stainless steel laminar"
   Alireza Sadeghi, Junya Inoue, Toshinori Ohmori, Toshihiko Koseki
   The 10th International Conference on Magnesium Alloys and Their Applications, 2015
3. "In-situ observation of contraction twin formation in AZ31 Mg alloys"
   Junya Inoue, Alireza Sadeghi, Toshinori Ohmori, Toshihiko Koseki
   MRS 2014 (Materiasl Research Society), 2014
4. "MICROSTRUCTURE AND MECHANICAL BEHAVIOR OF NOVEL EXTRUDED MAGNESIUM ALLOYS"
   Kavan Hazeli, Alireza Sadeghi, Mihriban Pekguleryuz, Antonios Kontsos
   Mg2012: 9th International Conference on Magnesium Alloys and their Applications, 2012
5. "Numerical and Experimental Investigation of the Effect of Substrate Material on Solidification of Molten Metal Droplets in 3D Printing by Droplet-on-Demand Method"
   Mojtaba Mollaei, Alireza Sadeghi
   The 19th National Conference and the 8th International Conference on Construction and Production Engineering of Iran, 2023
6. "The effect of pulse delay on the formation of metal droplets in the magnetohydrodynamic nozzle of a three-dimensional droplet printer as a function of demand"
   ایمان فاطمی مهر, Alireza Sadeghi
   The 19th National Conference and the 8th International Conference on Construction and Production Engineering of Iran, 2023
7. "Investigation of the effect of magnetohydrodynamic pump parameters on the characteristics of the 3D printed metal layer"
   Arya Talaie, Alireza Sadeghi
   18th National and 7th International Conference of Manufacturing Engineering, 2022
8. "Numerical and Experimental Investigation of Fall and Freezing of Metal Drops Using Magnetohydrodynamic Pump (MHD)"
   Alireza Sadeghi, ایمان فاطمی مهر, Mohammad amin Bajelani
   18th National and 7th International Conference of Manufacturing Engineering, 2022
9. "Evaluation of affecting parameters on the control of droplet overlap in Drop on Demand metallic 3D printers"
   Mehrdad Pourjam, Alireza Sadeghi
   18th National and 7th International Conference of Manufacturing Engineering, 2022
10. "Surface Corrosion and Molten Magnesium Processing Equipment: Introduction of LaPO4 Anti-Corrosion Ceramic Coating"
    Mohammad Amin Ahmadzadeh, Alireza Sadeghi, Seyed Farshid Chini
    17th National and 6th International Conference of Manufacturing Engineering, 2021
11. "Joining of Aluminum 6082 to Martensitic Stainless Steel 420 by Tansient Liquid Phase Bonding using Sn-Zn interlayer"
    Alireza Ahari, Babak Gerami Shirazi, Farzin Faraji, Alireza Sadeghi
    17th National and 6th International Conference of Manufacturing Engineering, 2021
12. "Effect of Sr on Microstructure and Fatigue Behavior of AZ31 Magnesium Alloy"
    Hooman Hasanpoor, Alireza Sadeghi, سیدمحمد حسینی
    17th National and 6th International Conference of Manufacturing Engineering, 2021
13. "Effect of Accumulative Roll Bonding on Mechanical Properties of Pure Aluminum"
    Zohreh Sarvi, Alireza Sadeghi, Mahmoud Mousavi Mashhadi
    17th National and 6th International Conference of Manufacturing Engineering, 2021
14. "Drawing and physical Characterization of Al/Cu Bimetal Bars"
    Farzin Faraji, Alireza Ahari, Alireza Sadeghi
    17th National and 6th International Conference of Manufacturing Engineering, 2021
15. "Effect of Zn coating on Iron Cable in Corrosion of Mg Sacrificial Anodes Fabricated by Co-Extrusion"
    Amir Akbari, Alireza Sadeghi, Karen Abrinia, Mohammad Amin Ahmadzadeh
    17th National and 6th International Conference of Manufacturing Engineering, 2021
16. "A Study on Application of Magnesium alloys in Automotive Industry"
    Sahel Mohammadi, Mohammad Hossein Sadeghi, Alireza Sadeghi
    5th Iran Automotive Industry International Conference, 2018