Journal Paper

1. "Transfer learning-based techniques for efficient 3D-reconstruction of functionally graded materials"
   Seyed Pouria Hamidpour, Alireza Araee, Majid Baniassadi
   MATERIALS & DESIGN, Vol. 248, 2024
2. "Multiphase Reconstruction of Heterogenous Materials Using Machine Learning and Quality of Connection Function"
   Pouria Hamidpour, Alireza Araee, Majid Baniassadi, Hamid Garmestani
   MATERIALS, Vol. 17, No 13, 2024
3. "Analysis of Vibratory Stress Relief (VSR) Parameters on Mechanical and Metallurgical Properties of AISI 1008"
   Mehdi Jafari Vardanjani, Alireza Araee
   PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, Vol. 68, No 2, pp.149-161, 2024
4. "Evaluation of the Forming Limit Diagram (FLD) for St-Mg-St Multilayer Sheet Manufactured by Transient Liquid Phase (TLP) Bonding"
   Vahid Chenarani, Ali Mahdiani, Mohamadjafar Hadad, M. Hossein Sehhat, Mohsen Hedayati Dezfooli, Alireza Araee
   Metallography Microstructure and Analysis, Vol. 1, No 1, pp.1-13, 2022
5. "Experimental and numerical investigation of the effects of preheating temperature on cutting force, chip shape and surface roughness in hot turning of AISI630 hardened stainless steel"
   Seyed Mohammad Ebrahimi, Mohamadjafar Hadad, Alireza Araee
   Energy Equipment and Systems, Vol. 9, No 2, pp.145-158, 2021
6. "Sustainable machining of hardened AISI630 stainless steel using thermally enhanced turning technique"
   Seyed Mohammad Ebrahimi, Mohamadjafar Hadad, Alireza Araee
   MACHINING SCIENCE AND TECHNOLOGY, Vol. 1, No 1, pp.1-20, 2021
7. "Influence of machining conditions on tool wear and surface characteristics in hot turning of AISI630 steel"
   Seyed Mohammad Ebrahimi, Mohamadjafar Hadad, Alireza Araee, Seyed Hamid Ebrahimi
   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 1, No 1, 2021
8. "Experimental Investigations and Modeling of Tool Wear in Gun-Drilling Process of 37Cr4 Forge Steel, Using Artificial Neural Network with Taguchi Method"
   Amir Rezazadeh, Alireza Araee, Ahad Gholipoor
   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 74, No 1, pp.195-203, 2020
9. "Plateau honing of a diesel engine cylinder with special topography and reasonable machining time"
   babak sadezadeh, Alireza Araee, samad Nadimi Bavil Oliaei, vahid Rezaeizad Farshi
   TRIBOLOGY INTERNATIONAL, Vol. 146, No 34, 2020
10. "Condition monitoring of crack extension in the reinforcement adhesive joints by carbon nanotubes"
    Omid Sam Daliri, Mohammadreza Farahani, Alireza Araee
    Welding Technology Review, Vol. 91, No 12, pp.7-15, 2020
11. "Investigation of the effects of constitutive law on numerical analysis of turning processes to predict the chip morphology, tool temperature, and cutting force"
    Seyed Mohammad Ebrahimi, Alireza Araee, Mohamadjafar Hadad
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 1, No 1, pp.1-20, 2019
12. "Impedance analysis for condition monitoring of single lap CNT-epoxy adhesive joint"
    Omid Sam Daliri, Lisa-marie Faller, Mohammadreza Farahani, Ali Roshanghias, Alireza Araee, Majid Baniassadi, Hannes Oberlercher, Hubert Zangl
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, Vol. 88, No 1, pp.59-65, 2019
13. "MWCNT–Epoxy Nanocomposite Sensors for Structural Health Monitoring"
    Omid Sam Daliri, Lisa-marie Faller, Mohammadreza Farahani, Ali Roshanghias, Hannes Oberlercher, Tobias Mitterer, Alireza Araee, Hubert Zangl
    ELECTRONICS, Vol. 7, No 8, 2018
14. "Influence of Shunting Current on the Metallurgical and Mechanical Behaviour of Resistance Spot-welded Joints in AA2219 Joints"
    Mehdi Jafari Vardanjani, Alireza Araee, Jacek Senkara, Majid Sohrabian, Roozbeh Zarandooz
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, Vol. 62, No 11, pp.625-635, 2016
15. "Theoretical analysis of shunting effect in resistance spot welding (RSW) of AA2219"
    Mehdi Jafari, Alireza Araee, J. Senkara, J. Jakubowski, J. Godek
    JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS, Vol. 39, No 8, pp.907-918, 2016
16. "Metallurgical Effects of Shunting Current on Resistance Spot-Welded Joints of AA2219 Sheets"
    M. Jafari Vardanjan, Alireza Araee, J. Senkara, J. Jakubowski, J. Godek
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 25, No 8, pp.3506-3517, 2016
17. "Experimental and numerical analysis of shunting effect in resistance spot welding of Al2219 sheets"
    Mehdi Jafari, Alireza Araee, تسویوشی ساکایی , David J. Zajac, Mauricio Sacchi
    Bulletin of the Polish Academy of Sciences-Technical Sciences, Vol. 64, No 2, pp.425-434, 2016
18. "Effect of SiC particles dispersion on the grain size and mechanical properties of Cu/SiC matal matrix nano-composites produced via FSP"
    Mohammad Barmouz, Alireza Araee
    Journal of Nano Research, Vol. 26, No 26, pp.53-58, 2013
19. "Characteristics of Diffusion Annealing Between Martensitic Stainless Steel and Nickel in the Form of Coating and Foil"
    Alireza Araee, Hamid Sabetghadam
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 19, No 7, pp.1015-1021, 2010
20. "diffusion bonding of 410 stainless steel to copper usind a nickel interlayer"
    Hamid Sabetghadam , Abas Zarei Hanzaki , Alireza Araee
    MATERIALS CHARACTERIZATION, Vol. 61, No 6, pp.626-634, 2010
21. "Diffusion Bonding Characteristics of 410 Stainless Steel/Cu with Ni Interlayer"
    Abbas Zarei Hanzki, Hamid Sabet-ghadam, Alireza Araee, Ali Mohammad Hadian
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, Vol. 26, No 2, 2010
22. "microstructurel evaluation of 410 ss/cu diffusion bonded joint"
    H Sabetghadam , A Zarei Hanzaki , Alireza Araee, A Hadian
    JOURNAL OF MATERIALS SCIENCE, Vol. 26, No 2, pp.163-169, 2010
23. "Experimental investigation of the effects of hot turning parameters on the cutting tool wear and surface roughness of AISI630 hardened stainless steel"
    Seyed Mohammad Ebrahimi, Mohamadjafar Hadad, Alireza Araee, Seyed Hamid Ebrahimi
    Journal of Manufacturing Engineering, Vol. 8, No 2, pp.52-64, 2021
24. "Shunting Effect in Resistance Spot Welded (RSW) Joints of Aluminum Alloys 2219"
    Mehdi Jafari Vardanjani, Alireza Araee
    Amirkabir Journal of Mechanical Engineering, Vol. 45, No 4, pp.1-14, 2017
25. "Design and manufacturing of modified Iosipesque shear test fixture to determine the in layered composite properties"
    Mohamadreza Vaziri, Alireza Araee, Ahmadreza Farokhi, Nabi Mehri Khansari
    Mechanical Engineering modares, Vol. 15, No 3, pp.75-83, 2015
26. "Design assembly system for variation product development"
    Pouyan Ghabezi, Alireza Araee
    Iranian Journal of Mechanical Engineering,, Vol. 22, No 90, pp.64-75, 2013

Conference Paper

1. "Experimental and numerical investigations on several parameters of clamp-on ultrasonic flowmeter"
   Hamid Reza Karbalaian, Alireza Araee, Moosa Ayati, Amin Ghoshouni
   10th International Symposium on Fluid Flow Measurement (ISFFM), 2018
2. "the brazing of AL 6061-t6 honeycomb panel base on retort furnace method used for small satellites reinforcement structure"
   Sam Rasolzadeh, Alireza Araee
   2014 international conference on brazing and special joinig tecknology, 2014
3. "Investigation on the effect of SAW sequence on the distortion in butt welded plates"
   Setayesh Hakak-zargar, Mohammadreza Farahani, Alireza Araee
   International Conference on Brazing, Soldering and Special Joininng technologies, 2014
4. "Proposing a modified configuration for Iosipescu shear test fixture"
   Mohamadreza Vaziri, Alireza Araee, Mehdi Farokhi, Said Fathi, Amin Seyednosrati
   The Bi-annual international conference on experimental solid mechanics, 2014
5. "Study on electromagnetic flowmeter with differential correlation detection characteristics"
   Alireza Araee, Moosa Ayati, Sara biglari, Mostafa Dabagh
   5th Iranian Flow Measurement Conference and Exhibition, 2022
6. "Experimental investigations and modeling of tool wear in gun-drilling process of 37Cr4 forge steel, using artificial neural network with Taguchi method"
   [] [], Alireza Araee
   ICME2022, 2022
7. "an inviestigation to the effects of thrmmechanical procesing parameters on the rstoration behaviorin X210Cr12 steel"
   Negar Kourosh Fard, Abbas Zarei Hanzki, Mohammad Habibi Parsa, Alireza Araee, محمدجواد حامدی
   7th jmat congress, 2003
8. "Hot dustility behavior in high Cr X20Cr13 martensitic stainless steel"
   Peyman Mohammadi, Abbas Zarei Hanzki, Mohammad Habibi Parsa, Alireza Araee
   7th JMAT congress, 2003
9. "the influensce of surface characterization and heat treatment parameters on diffusion of NIckel in AISI 420S.St"
   Abbas Zarei Hanzki, حمید ثابت قدم, Alireza Araee
   9th heat treatment and surface, 1999