مقالات علمی چاپ شده در مجلات

1. "Article Title: 3D profile modelling and accurate representation of the deforming region in the extrusion process of complex sections using equi-potential lines method"
   Seied Ahmad Tabatabaei, Kasiye Kasiye, Mohammad Kazem Besharati Givi
   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 0954405414560038, 2015
2. "Study on ultrafine-grained aluminum matrix nanocomposite joint fabricated by friction stir welding"
   Mehdi Saeidi, Reza Abdi Behnagh, Babak Manafi, Mohsen Farahmand Nikoo, Mohammad Kazem Besharati Givi
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 1464420715572235, No 76393483, 2015
3. "Optimization of AZ91 friction stir welding parameters using Taguchi method"
   Parviz Asadi, Mostafa Akbari, Mohammad Kazem Besharati Givi, Masoud Shariat Panahi
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 1464420715570987, No 76392235, 2015
4. "Experimental optimization of the mechanical properties of friction stir welded Acrylonitrile Butadiene Styrene sheets"
   Nasser Sadeghian, Mohammad Kazem Besharati Givi
   MATERIALS & DESIGN, Vol. 67, No 67, pp.145-153, 2015
5. "Fabrication of Mini and Micro Dental Implants using Micro Investment Casting and Its Challenges"
   Payam Faghihi, M. Mehdi Mohammadi, Mohammad Kazem Besharati Givi
   International Journal of Science and Engineering Investigations (IJSEI), Vol. 2, No 13, pp.97-101, 2015
6. "Microstructural and mechanical behaviors of nano-SiC-reinforced AA7075-O FSW joints prepared through two passes"
   Mohsen Bahrami, Mohsen Farahmand Nikoo, Mohammad Kazem Besharati Givi
   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 626, pp.220-228, 2014
7. "Influences of welding parameters on the quality and creep properties of friction stir welded polyethylene plates"
   Sadegh Hoseinlaghab, Seyed Sajad Mirjavadi, Nasser Sadeghian, Iraj Jalili, Mohammad Azarbarmas, Mohammad Kazem Besharati Givi
   MATERIALS & DESIGN, Vol. 67, No 67, pp.369-378, 2014
8. "A New Step Heat Treatment for Steel AISI 4340"
   Seyed Majid Safi, Mohammad Kazem Besharati Givi
   METAL SCIENCE AND HEAT TREATMENT, Vol. 56, pp.78-8, 2014
9. "Microstructural and mechanical properties of friction stir welded 5050 Al alloy and 304 stainless steel plates"
   Mohammad Habibnia, Mohammad Shakeri, Saman Nourouzi, Mohammad Kazem Besharati Givi
   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 76, pp.819-829, 2014
10. "Microstructural, mechanical, and thermophysical characterization of Cu/WC composite layers fabricated via friction stir processing"
    Jahangir Khosravi, Mohammad Kazem Besharati Givi, Mohsen Barmouz, Abbas Rahi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 74, pp.1087-1096, 2014
11. "Predicting the hardness of carbon nanotube reinforced copper matrix nanocomposites using two adaptive fuzzy inference system identifiers"
    Abolfazl Alizadeh Sahraei, Alireza Fathi, Ahmad Mozaffari, Mohammad Kazem Besharati Givi, Mohammad Hadi Pashaei
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. 0/0, pp.1-12, 2014
12. "Application of equi-potential lines method for accurate definition of the deforming zone in the upper-bound analysis of forward extrusion problems"
    Seyed Ahmad Tabatabaei, Karen Abrinia, Mohammad Kazem Besharati Givi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 72, pp.1039-1050, 2014
13. "Fabricating and improving properties of copper matrix nanocomposites by electroless copper-coated MWCNTs"
    Abolfazl Alizadeh Sahraei, Alireza Fathi, Mohammad Kazem Besharati Givi, Mohammad Hadi Pashaei
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. 116, No 4, pp.1677-1686, 2014
14. "Exploring the effects of SiC reinforcement incorporation on mechanical properties of friction stir welded 7075 aluminum alloy: Fatigue life, impact energy, tensile strength"
    Mohsen Bahrami, Nader Helmi, Kamran Dehghani, Mohammad Kazem Besharati Givi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 595, No 595, pp.173-178, 2014
15. "A novel approach to develop aluminum matrix nano-composite employing friction stir welding technique"
    Mohsen Bahrami, Kamran Dehghani, Mohammad Kazem Besharati Givi
    MATERIALS & DESIGN, Vol. 53, No 53, pp.217-225, 2014
16. "On the role of pin geometry in microstructure and mechanical properties of AA7075/SiC nano-composite fabricated by friction stir welding technique"
    Mohsen Bahrami, Mohammad Kazem Besharati Givi, Kamran Dehghani, Nader Parvin
    MATERIALS & DESIGN, Vol. 53, No 53, pp.519-527, 2014
17. "Effect of tool pin profile on friction stir butt welding of high-zinc brass (CuZn40)"
    Afshin Emamikhah, Alireza Abbasi, Ali Atefat, Mohammad Kazem Besharati Givi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 71, pp.81-90, 2013
18. "Enhanced hardness and electrical properties of copper nanocomposites reinforced by functionalized MWCNTs"
    Abolfazl Alizadeh Sahraei, Alireza Fathi, Mohammad Kazem Besharati Givi, Shahab Boroun, Mohammad Hadi Pashaei
    JOURNAL OF COMPOSITE MATERIALS, Vol. 48, No 28, pp.3485-3497, 2013
19. "Effect of Friction Stir Processing on Mechanical Properties of Surface Composite of Cu Reinforced with Cr Particles"
    Bahram A.khiyavi, Abdolhossein Jalali Aghchai, Mohammadreza Arbabtafti, Mohammad Kazem Besharati Givi, Jalal Jafari, Mohammadreza Arbabtafti
    Advanced Materials Research, Vol. 829, pp.851-856, 2013
20. "Evaluation of Tensile Deformation Properties of Friction Stir Processed Pure Copper: Effect of Processing Parameters and Pass Number"
    Mohsen Barmouz, Mohammad Kazem Besharati Givi, Jalal Jafari
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 23, No 1, pp.101-107, 2013
21. "A Comparison of Tensile Strength and Impact Energy of Austempered versus Step Quenched 4340 Ultra High Strength Steel"
    Seyed Majid Safi, Seyed Yousef Ahmadi Brooghani, Hossein Amirabadi, Khalil Khalili, Mohammad Kazem Besharati Givi
    Key Engineering Materials, Vol. 553, No 553, pp.41-45, 2013
22. "Investigation of the effect of Al-8B master alloy and strain-induced melt activation process on dry sliding wear behavior of an Al–Zn–Mg–Cu alloy"
    Seyed Sajad Mirjavandi, Mohammad Alipour, A.m.s Hamouda, Mohammad Kazem Besharati Givi, Massoud Emamy
    MATERIALS & DESIGN, Vol. 53, pp.308-316, 2013
23. "Modelling and Pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm"
    Mohammad Hasan Shojaeefard , Reza Abdi Behnagh Abdi Behnagh, Mostafa Akbari, Mohammad Kazem Besharati Givi, Foad Farhani
    MATERIALS & DESIGN, Vol. 44, pp.190-198, 2013
24. "On the role of cooling and tool rotational direction on microstructure and mechanical properties of friction stir processed AZ91"
    Parviz Asadi , Mohammad Kazem Besharati Givi, N Parvin , Alireza Araei , M Taherishargh , Saman Tutunchilar
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 63, pp.987-997, 2012
25. "Effects of Al-5TI-1B Master Alloy and Heat Treatment on the Microstructure and Dry Sliding Wear Behaviour of an Al-12Zn-3Mg-2.5Cu Alloy"
    Mohammad Alipour, Saeed Mirjavadi, Mohammad Kazem Besharati Givi, حسن رزمی, Massoud Emamy, Jafar Rasi Zadeh Ghani
    Iranian Journal of Materials Science and Engineering, Vol. 9, No 4, pp.8-16, 2012
26. "Investigation of weld defects in dissimilar friction stir welding of aluminium to brass by radiography"
    Ali Esmaeili, Mohammad Kazem Besharati Givi, Hmid Reza Zareie Rajani
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, Vol. 17, No 7, pp.539-543, 2012
27. "Simulation of material flow in friction stir processing of a cast Al–Si alloy"
    Saman Tutunchilar, Mohammad Haghpanahi, Mohammad Kazem Besharati Givi, Parviz Asadi, Pooya Bahemmat
    MATERIALS & DESIGN, Vol. 40, No 40, pp.415-426, 2012
28. "Effect of processing parameters on fabrication of Al - Mg/Cu composites via friction stir processing"
    Mehdi Zohoor , Mohammad Kazem Besharati Givi, Peyman Salami
    MATERIALS & DESIGN, Vol. 39, No 39, pp.358-365, 2012
29. "Experimental study on optomizing the effect of drilling parameters on roundness error of Aluminum using Response Surface methodology7075"
    Setayesh Hakak Zargar , Vahid Tahmasbi , Mohammad Kazem Besharati Givi, Mohammad Farzami
    Applied Mechanics and Materials, Vol. -, No 184185, pp.981-987, 2012
30. "Eutectic Al - Si pistonn alloy surface transformed to modified hypereutectic alloy via FSP"
    Saman Tutunchilar , Mohammad Kazem Besharati Givi, Majmad Haghpanahi , Parviz Asadi
    Materials Science and Engineering: A, Vol. 534, No 1, pp.557-567, 2012
31. "PRODUCING NANOCOMPOSITE LAYER ON THE SURFACE OF AS-CAST AZ91 MAGNESIUM ALLOY BY FRICTION STIR PROCESSING"
    Parviz Asadi, Mohammad Kazem Besharati Givi, Ghader I Faraji
    International Journal of Modern Physics: Conference Series, Vol. 05, No 5, pp.375-382, 2012
32. "Predicting the grain size and hardness of AZ91/SiC nanocomposite by artificial neural networks"
    Parviz Asadi , Mohammad Kazem Besharati Givi, Abbas Rastgo Ghamsari, M Akbari , V Zakeri , S Rasouli
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 63, pp.1095-1107, 2012
33. "mechanical properties corrosion resistance and micosturctural changes during friction stir processing of 5083 aluminum rolled plates"
    Mostafa Akbari , Mohammad Kazem Besharati Givi, Reza Abdi Behnagh
    MATERIALS AND MANUFACTURING PROCESSES, Vol. 27, No 6, pp.636-640, 2012
34. "investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC matrix composite fabricated via friction stir processing"
    Ali Dolatkhah , Peyman Golbabaei , Mohammad Kazem Besharati Givi, Farhad Molaiekiya
    MATERIALS & DESIGN, Vol. 37, pp.458-464, 2012
35. "mechanical and microstructural evaluation during multi - pass ECAR of Al1100 - O alloy"
    علی عظیمی , سامان توتونچیلر , قادر فرجی اسفنگره , Mohammad Kazem Besharati Givi
    MATERIALS & DESIGN, Vol. 42, pp.388-394, 2012
36. "Effects of SiC Particle Size and Process Parameters on the Microstructure and Hardness of AZ91/SiC Composite Layer Fabricated by FSP"
    Parviz Asadi , Mohammad Kazem Besharati Givi, Karen Abrinia, Mehdi Taherishargh , Rasul Salekrostam
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 20, No 9, 2011
37. "Experimental investigation of material flow and welding defects in friction stir welding of aluminum to brass"
    Mohammad Kazem Besharati Givi, Ali Esmaeili , H R Zareie Rajani
    MATERIALS AND MANUFACTURING PROCESSES, Vol. 27, No 12, pp.1402-1408, 2011
38. "Improving Friction Stir Welding between Copper and 304L Stainless Steel"
    Yousef Imani, Mohammad Kazem Besharati Givi, Michel Guillot
    Advanced Materials Research, Vol. 409, No 409, pp.263-268, 2011
39. "Molecular dynamics investigation 0f beta - SiC behvior under three axial tensile loading"
    Boheira Mortazavi , A Simchi , Mohammad Kazem Besharati Givi, Arajabpour
    Journal of Computational and Theoretical Nanoscience, Vol. 8, No 11, pp.2187-2192, 2011
40. "the role of rotation speed on intermetallic compounds formation and mechaniclal behavior of friction stir welded brass / aluminum 1050 couple"
    Ali Esmaeili , Hamid Reza Zareie Rajani , Mohammad Kazem Besharati Givi, Mohammad Kazem Besharati Givi , Mohammad Shamanian
    INTERMETALLICS, Vol. 19, No 11, pp.1719-1711, 2011
41. "Influence of tool pin profile on Micostructure and mechanical properties of Al / Cu composites fabrication via friction stir processing"
    Amir Mostafapour Asl , Saeed Mahmoodi Darani , Mohammad Kazem Besharati Givi, Arash Aghagol
    Journal of Advanced Materials, Vol. 383-390, pp.2753-2758, 2011
42. "direct extrusion of circular profiles with surface composite produced by friction stir processing"
    Arash Aghagol , Saeed Mahmoodi Darani , Karen Abrinia, Mohammad Kazem Besharati Givi
    Advanced Materials Research, Vol. 383/390, pp.2747-2752, 2011
43. "Experimental Investigation of Magnesium - Base Nanocomposite Produced by Friction Stir Processing : Effects of Particle Types and Number of Friction Stir Processing Passes"
    Mohammad Kazem Besharati Givi, Abolfazl Masoumi, Parviz Asadi , Aboalfazl Masoumi
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 42, No 9, pp.2820-2832, 2011
44. "A metallurgical and mechanical study on dissimilar Friction Stir welding of aluminum 1050 to brass ( CuZn30 )"
    Ali Esmaeili , Mohammad Kazem Besharati Givi, Hamid Reza Zareie Rajani
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 528, pp.7093-7102, 2011
45. "Study on dissimilar friction stir butt welding of AA7075-O and AA2024-T4 considering the manufacturing limitation"
    Pooya Bahemmat, Mohammad Haghpanahi, Mohammad Kazem Besharati Givi, Kambiz Reshad Seighalani
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 59, pp.939-953, 2011
46. "Effect of Sic Volume Fraction on the Microstructural and Mechanical Properties of Cu/Sic Composite Layer Fabricated by FSP"
    Parviz Asadi , Mohammad Kazem Besharati Givi, Mohsen Barmouz
    Defect and Diffusion Forum, Vol. 315-312, pp.505-500, 2011
47. "Production of Cu / Sic Nanocomposite Layers by Friction Stir Procesing"
    Mohsen Barmouz , Mohammad Kazem Besharati Givi, Parviz Asadi
    Defect and Diffusion Forum, Vol. 315-312, pp.324-3119, 2011
48. "A novel approach for producing polymer nanocomposites by in - situ dispersion of clay particles via friction stir processing"
    Mohsen Barmouz , Javad Seyfi , Mohammad Kazem Besharati Givi, Iman Hejazi , Seyed Mohammad Davachi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 528, No 6, pp.3003-3006, 2011
49. "Investigation of mechanical properties of Cu/SiC composite fabricated by FSP : Effect of SiC particles size and volume fraction"
    Mohsen Barmouza , Parviz Asadi , Mohammad Kazem Besharati Givi, Mehdi Taherisharghb
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 528, No 3, pp.1749-1740, 2011
50. "Investigation of the effects of critical process parameters of friction stir welding of polyethylene"
    Sina Saeedy , Mohammad Kazem Besharati Givi
    Proceedings of the Institution of Mechanical Engineers. Part B. Management and engineering manufacture, Vol. 225, No 8, pp.1305-1310, 2011
51. "Experimental Study on the Effects of Rotational Speed and Attack Angle on High Density polyethylene ( HDPE Friction Stir Welded Butt Joints"
    Sina Saeedy , Mohammad Kazem Besharati Givi
    Advanced Materials Research, Vol. 189193, pp.3587-3583, 2011
52. "Experimental study of the critical process parameters of machining of stainless steels using the taguchi approach"
    Sina Saeedy , Mohammad Kazem Besharati Givi
    Advanced Materials Research, Vol. 189, pp.3183-3186, 2011
53. "On the role of processining parameters in producing Cu/Sic metal matrix composites via friction stir processing : Investigating microstructuremicroharhnesswear and tensile behavior"
    Mohammad Kazem Besharati Givi, Javad Seifi , Mohsen Barmooz , Mohamadkazem Besharati Givi
    MATERIALS CHARACTERIZATION, Vol. 62, No 1, pp.117-108, 2011
54. "fabrication of in situ Cu/SiC composite using multi - pass friction stir processing : Evaluation of microstructuralporositymechanical and electical behavior"
    Mohsen Barmouz , Mohammad Kazem Besharati Givi
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, Vol. 42, No 42, pp.1453-1445, 2011
55. "Producing of AZ91 / SiC composite by friction stir processing ( FSP"
    Parviz Asadi , Ghader Faraji , Mohammad Kazem Besharati Givi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 51, pp.260-247, 2010
56. "Influence of tool pin profile on the microstructure and mechanical behavior of Cu / SiC metal matrix composites produced by friction stir processing"
    Mohsen Barmouz , Mohammad Kazem Besharati Givi, Jalal Jafari
    Advanced Materials Research, Vol. 154-155, pp.1766-1761, 2010
57. "A new modified austempering to increase simultaneously strength and ductility for UHS steels. Ein modifiziertes Verfahren der Zwischenstufenvergütung zur simultanen Erhöhung der Festigkeit und Duktilität von UHS Stählen"
    Seied Majid Safi, Mohammad Kazem Besharati Givi
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 41, No 5, pp.356-359, 2010
58. "An investigation of temperature effect on microstructure and mechanical properties of aluminum(A 360) processed by thixoforging"
    Keivan Davami, M.shaygan Shaygan, Mohammad Kazem Besharati Givi
    World Scientific and Engineering Academy and Society, Vol. 8, No 12, pp.86-92, 2010
59. "Influence of Friction Stir Processing Parameters on the Fabrication of SiC / 316L Surface Composite"
    Rasol Salekrostam , Mohamad Kazem Besharati Givi , Mohammad Kazem Besharati Givi, Parviz Asadi , Poya Bahemmat
    Defect and Diffusion Forum, Vol. 297-301, pp.226-221, 2010
60. "Enhanced Mechanical Properties of Stainless Steel 316 L via Friction Stir Processing"
    Rasool Salekrostam , Mohammad Kazem Besharati Givi
    Defect and Diffusion Forum, Vol. 301-297, pp.220-215, 2010
61. "A New Modified Austempering to Increase Strength and Ductility Simultaneously for UHS Steels"
    Seyed Majid Safi , Mohammad Kazem Besharati Givi
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Vol. 297-301, pp.1109-1115, 2010
62. "Investigations on the effects of the Tool MaterialGeometryand Tilt Angle on Friction Stir Welding of Pure Titanium"
    Kambiz Reshad Seighalani , Mohammad Kazem Besharati Givi, Ali Mohammad Nasiri , Pooya Bahemmat
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 19, pp.962-955, 2010
63. "Producing Ultrafine - Grained AZ91 from As - Cast AZ91 by FSP"
    Parviz Asadi , Mohammad Kazem Besharati Givi, Ghader Faraji
    MATERIALS AND MANUFACTURING PROCESSES, Vol. 25, No 11, pp.1226-1219, 2010
64. "Mechanical,micro,and macrostructural analysis of AA7075 - T6 fabricated by friction stir butt welding with different rotetional speeds and tool pin profiles"
    Rasool Salekrostam , Ali Rahbari , Mohammad Haghpanahi , Mohammad Kazem Besharati Givi, Pooya Bahemmat
    Proceedings of the Institution of Mechanical Engineers. Part B. Management and engineering manufacture, Vol. 224, No 3, pp.433-419, 2010
65. "Study on mechanical micro - and macrostructural characteristics of dissimilar friction stir welding of AA6061 - T6 and AA7075 - T6 by P Bahemmat M Haghpanahi M K Besharati S Ahsanizadeh and H Rezaei"
    Poya Bahemmat , Mohammad Haghpanahi , Mohammad Kazem Besharati Givi, Siyavash Ahsanizadeh , Hasan Rezaei
    Proceedings of the Institution of Mechanical Engineers. Part B. Management and engineering manufacture, Vol. 224b, No 12, pp.1865-1854, 2010
66. "An Investigation of Solidification Conditions and Melt Treatment on Microporosity Formation"
    Keivan Davami, Mehrdad Shaygani, Mohammad Kazem Besharati Givi, Mahmoud Mousavi Mashhadi
    Proceedings of The 2008 IAJC-IJME International Conference ISBN 978-1-60643-379-9, Vol. 226, No 108, pp.10-26, 2008
67. "Experimental study on the effect of rotational speed and tool pin profile on aa2024 aluminium friction stir welded butt joints"
    Pooya Bahemmat, Ali Rahbari, Mohammad Haghpanahi, Mohammad Kazem Besharati Givi
    Proceedings of ECTC 2008, October 3-4, 2008, Miami, Florida, USA., p 1.1, Vol. 1, No 1, 2008
68. "Modeling of solidification conditions and melt treatment on microprosity formation"
    K Davami , Mohammad Kazem Besharati Givi, I M Shaygan
    International Journal of Mathematics and Computers in Simulation, Vol. 2, No 2, pp.144-151, 2008
69. "Experimental and finite element analysis of parameters in manufacturing of metal bellows"
    Ghader Faraj , Mohammad Kazem Besharati Givi, Mahmoud Mousavi Mashhadi, H Kashanizade
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 38, pp.641-648, 2008
70. "A New Design for Grain Combine Threshe"
    Seyed Saeid Mohtasebi, Mansour Behrozi Lar, Javad Alidadi , Kazem Besharat , Mohammad Kazem Besharati Givi
    INTERNATIONAL JOURNAL OF AGRICULTURE AND BIOLOGY, Vol. 8, No 5, pp.680-68, 2006
71. "بررسی اثرات پارامترهای جوشکاری بر راندمان پروسه جوشکاری زیرپودری"
    ستایش حکاک زرگر، محمد رضا فراهانی، محمدکاظم بشارتی گیوی
    مهندسی مکانیک مدرس، نسخه 13، شماره 12، صفحات:79-87، 1392
72. "فرآیند کشش عمیق استوانه های بانسبت کشش خیلی بلند"
    قادر فرجی ، محمدکاظم بشارتی گیوی، سعید یارمحمدی ، محمود موسوی مشهدی
    دانشکده فنی دانشگاه تهران، نسخه 43، شماره 4، صفحات:519-525، 1388
73. "فرایند کشش عمیق استوانه های با نسبت کشش خیلی بالا"
    قادر فرجی ، محمدکاظم بشارتی گیوی، سعید یارمحمدی ، محمود موسوی مشهدی
    دانشکده فنی دانشگاه تهران، نسخه 43، شماره 4، صفحات:525-519، 1388
74. "بررسی روشهای تولید نانوتیوب‌های کربنب و انتخاب بهترین روش ساخت مناسب با استفاده از روش تصمیم‌گیری چند معیاره"
    محمدکاظم بشارتی گیوی، منصور اکبری ، اکبر آفاقی خطیبی
    دانشکده فنی دانشگاه تهران، نسخه 42، شماره 1، صفحات:63-49، 1387
75. "مقایسه نتایج تجربی و شبیه سازی اثرات شعاع لبه سنبه و ماتریس بر فرایند کشش عمیق فولاد زنگ نزن 304"
    آرش مشایخی، محمدکاظم بشارتی گیوی
    دانشکده فنی دانشگاه تهران، نسخه 41، شماره 11، صفحات:995-1001، 1386
76. "مطالعه تجربی و عددی فرایند شکل دهی بیلوزهای فلزی"
    حسین کاشانی زاده ، قادر فرجی ، محمدکاظم بشارتی گیوی، محمود موسوی مشهدی
    مکانیک هوافضا، نسخه 2، شماره 2، صفحات:49-41، 1385

مقالات علمی ارائه شده در همایش‌ها

1. "Carbon Nanotubes reinforced Copper matrix composit via friction stir processesing Fabrication of Multi-walled"
   جلال جعفری, Mohammad Kazem Besharati Givi
   The 3rd International Coneference on Composites charactrizationFabrication snd Application(CCFA-3, 2012
2. "A comparison of mechanical properties of Austempered Versus step Quenched 4340 steel"
   سیدمجید سافی , سیدیوسف احمدی بروغنی , حسین امیر آبادی, خلیل خلیلی, Mohammad Kazem Besharati Givi
   6th internetional Coneference on Advanced Computational Engineering and Experimenting ACEX2012, 2012
3. "Theoretical and Experimental Analysis of Tube Hydroforming in Triangular Die"
   Mahday Gelokhani, Mohammad Kazem Besharati Givi, Mahmoud Mousavi Mashhadi, Amir Azizi, Mohammd Reza Dehghan
   20th Annual International Conference on Mechanical Engineering, 2012
4. "بر رسی تاثیر هندسه ابزار در خواص جوش در جوشکاری اصطکاکی اغتشاشی در زیر آب"
   عادل صداقتی، محمدکاظم بشارتی گیوی، عباس رهی
   سومین کنفزانس بین المللی ودوازدهمین کنفرانس ملی مهندسی ساخت و تولید، 1390
5. "بر رسی پارامترهای موثر بر فرایند هیدروفورمینگ لوله دو جداره در قالب مثلثی با روش اجزای محدود"
   lمهدی جلوخانی، محمدکاظم بشارتی گیوی، محمود موسوی، احمد طباطبایی، امیر عزیزی
   سومین کنفرانس بین المللی ودوازدهمین کنفرانس ملی مهندسی ساخت و تولید، 1390
6. "بر رسی تولید کامپوزیت Al-Mg-Cu به روش فرایند اصطکاکی اغتشاشی"
   پیمان سلامی، مهدی ظهور، محمدکاظم بشارتی گیوی، حسین نجفی
   سومین کنفرانس بین المللی و دوازدهمین کنفرانس ملی مهندسی ساخت وتولید، 1390